Gearbox Penyebar Pupuk L-25A Rasio 1:1.35 Pengganti untuk Gearbox Comer L-25A

The L-25A Fertilizer Spreader Gearbox Ratio 1:1.35, a direct replacement for the Comer L-25A Gearbox, is an indispensable component of modern agricultural machinery. Also widely known as a fertilizer distributor gearbox, this unit is engineered for precision tasks including soil preparation, crop treatment, and fertilizer spreading. Positioned at the centre of the spreading machine, it efficiently transmits power from the tractor's Power Take-Off (PTO) to the spinning discs or augers responsible for evenly distributing fertilizer across fields. Designed to deliver consistent power transmission under varying operational loads, this fertilizer spreader gearbox features a 1:1.35 speed-increasing ratio with a maximum input of 8.1 kW and a maximum output of 9.9 kW (13.5 HP), making it suitable for a broad spectrum of agricultural tasks.

Constructed with a lightweight yet durable aluminium housing and tipping the scales at just 4.1 kg, this agricultural gearbox for fertilizer spreader applications brings together reliability and ease of installation. The internal gear arrangement (reducing stages 3-4) adjusts rotational speed and torque precisely according to spreading requirements, optimising machine performance throughout the season. Compatible with chemical fertiliser spreaders, mowers, and band saws, this fertiliser spreader gearbox is built to endure the harsh chemicals, moisture, and mechanical stress typical of intensive field operations. Supplied without oil, it requires initial fill with SAE 80W-90 (max capacity 0.35 L) before commissioning, with the first oil change due after 50 to 70 operating hours to guarantee long-term reliability. Whether used in large-scale grain farming or specialty horticulture, this unit is a trusted solution from one of the leading fertilizer spreader gearbox manufacturers in Korea.

Parameter Teknis

Kami telah menyelesaikan audit pemasok pihak ketiga dan verifikasi perusahaan yang didukung oleh SGS / TÜV Rheinland. Verifikasi ini membantu pembeli meninjau identitas perusahaan, operasional bisnis, profil pemasok, dan kemampuan manufaktur secara umum. Laporan inspeksi khusus produk, dokumen material, atau catatan kepatuhan dapat diberikan sesuai dengan persyaratan pesanan.

Jumlah Pesanan Minimum (MOQ): Dapat diatur secara fleksibel berdasarkan jenis produk dan jumlah pesanan.

Contoh: Pelanggan baru dapat meminta 1–5 sampel dalam keadaan yang sesuai.

Pesanan Campuran: Penggabungan berbagai model didukung; jumlah total pesanan harus mencapai sekitar $1.500.

Pesanan Kecil: Pemesanan mulai dari 1-2 buah didukung, tetapi harga satuannya akan relatif lebih tinggi.

Waktu Tunggu: 10–25 hari kerja untuk suku cadang standar; 20–45 hari kerja untuk komponen yang disesuaikan; 45–120 hari kerja untuk peralatan berbasis proyek.

Syarat Perdagangan: EXW, FOB, CIF, dan DAP umumnya didukung; ketentuan FCA, CFR, CPT, CIP, dan DDP dapat dinegosiasikan secara khusus.

Dimensi Gearbox Penyebar Pupuk L-25A

Key Benefits of the L-25A Fertilizer Spreader Gearbox 1:1.35

1. Enhanced Precision and Variable Ratio Control
The L-25A's engineered 1:1.35 fertilizer spreader gearbox ratio provides calibrated speed conversion for even, consistent fertilizer distribution across every pass. Variable-ratio configurations help operators fine-tune application rates to specific crops, soil types, and field conditions, reducing over-application and input cost waste. Precise torque management means no hot spots or bare patches, protecting both yield and budget throughout the growing season.

2. Exceptional Durability in Harsh Conditions
Built with a precision die-cast aluminium housing, this fertilizer gearbox delivers outstanding corrosion resistance against aggressive chemical fertilisers, moisture, and field debris. Robust seals and quality bearings protect internal gearing from abrasive wear, while the sealed design prevents contamination ingress during wet-weather field operations. At just 4.1 kg, the lightweight aluminium body reduces machine load without sacrificing structural strength or service life.

3. Optimised Fuel Efficiency
The L-25A's internally optimised gear mesh minimises energy loss during power transfer from the tractor PTO, reducing parasitic drag on the tractor engine. With a maximum input of 8.1 kW and an output of 9.9 kW, the step-up ratio ensures more of the engine's power reaches the spreading mechanism. Lower mechanical friction means reduced fuel consumption per hectare spread, delivering measurable operating cost savings over an entire cropping season for farms of any scale.

4. Wide Versatility Across Applications
This gearbox for fertilizer spreader machines is not limited to granular fertilisers. Its robust design handles liquid, pelletised, and organic amendments with equal effectiveness, and it is also rated for use in mowers and band saws, making it a multi-application investment. The standardised 1" 3/8 Z6 PTO input interface ensures broad tractor compatibility, while the output shaft dimensions match the Comer L-25A footprint for straightforward OEM replacement across multiple spreader brands.

5. Desain dengan Perawatan Rendah
Internal oil-bath lubrication, combined with a maximum oil change interval of 500 operating hours, dramatically reduces downtime and labour costs. The modular component layout makes access to bearings, seals, and gears straightforward for routine service. A simple SAE 80W-90 fill (max 0.35 L) is all that is required at commissioning. With clearly defined service intervals and readily available fertilizer spreader gearbox parts, operators can plan maintenance around the farming calendar rather than responding to breakdowns.

6. Kompatibilitas Penggantian Direct Comer L-25A
Engineered as a precision drop-in replacement for the Comer L-25A, CMN Transmission's version matches all critical mounting dimensions, shaft configurations (X, Y, Z), and flange patterns. This means zero machine modification is required during installation, eliminating costly downtime for machinery re-engineering. As trusted fertilizer spreader suppliers, CMN Transmission stocks this unit ready to ship globally, with full technical support available to ensure your spreader returns to productive field work as quickly as possible.

Working Principle

The L-25A fertilizer spreader gearbox receives rotational energy directly from the tractor's PTO shaft, typically operating at 540 RPM. Through its internally engineered bevel gear set (reducing stages 3-4), the unit converts this input speed using a 1:1.35 ratio, stepping up the output speed to deliver consistent, higher disc or auger RPM without overloading the driveline. The maximum input power of 8.1 kW is efficiently transformed to 9.9 kW output (13.5 HP), providing the torque necessary to drive spreading discs through heavy granule loads, damp conditions, or dense organic material. The conversion process is smooth and continuous, meaning the spreading discs maintain a consistent rotational speed regardless of modest variations in tractor engine load or ground speed. This consistent output is critical for achieving uniform fertilizer spreader gearbox ratio-dependent spreading widths and application rates required by modern precision agriculture.

The die-cast aluminium housing of this agricultural gearbox is both lightweight and structurally rigid, resisting deformation under the mechanical loads typical of field operation. High-quality oil seals around each shaft prevent ingress of dust, fertiliser granules, moisture, and plant material that could accelerate gear and bearing wear. The sealed oil-bath lubrication system ensures all internal components, including bevel gears, bearings, and output shafts, remain continuously lubricated even during extended operating hours. A 0.35 L oil reservoir using SAE 80W-90 gear oil maintains an effective lubricant film across all contact surfaces, minimising friction heat and wear debris. The housing's corrosion-resistant aluminium alloy performs reliably when exposed to ammonium nitrate, urea, potash, and liquid fertiliser splatter, environments that would rapidly degrade inferior gearbox materials.

Although the L-25A operates as a direct-drive unit, it is designed for use within well-specified power limits (max 8.1 kW input) to prevent overload damage. In practice, the upstream PTO driveline incorporating slip clutches or shear bolt protection devices on the connecting PTO shaft interrupts torque if the spreading mechanism encounters a blockage, a large stone, or a sudden jamming event, shielding the fertilizer gearbox internals from catastrophic impact loads. The oil-bath lubrication system doubles as a thermal buffer, absorbing and dissipating heat generated during sustained spreading operations on long field passes. This combination of passive thermal management and upstream mechanical protection means the gearbox can reliably operate through full-day spreading sessions across large agricultural properties without risk of premature failure. Service intervals are straightforward: change oil after the first 50 to 70 hours and thereafter every 500 hours or annually, whichever occurs first, ensuring sustained reliable performance across many seasons of continuous agricultural use.

Applications of the L-25A Fertilizer Spreader Gearbox

L-25A Fertiliser Spreader Gearbox Parts

1. Gearbox Housing (Aluminium Shell)
The die-cast aluminium housing forms the structural skeleton of the entire fertilizer spreader gearbox assembly. Precision-machined to tight dimensional tolerances, it maintains accurate gear and bearing alignment under load. Its corrosion-resistant alloy composition resists the aggressive chemical environment of fertiliser application, while the lightweight construction (contributing to the total 4.1 kg unit weight) simplifies handling, installation, and machine mounting on a wide range of spreader frames.

2. Poros Masukan
The hardened steel input shaft (X-axis) accepts PTO drive from the tractor via a 1" 3/8 Z6 splined connection, transferring 540 RPM rotational energy into the gearbox at up to 8.1 kW. It is precision-ground for concentricity and supported by sealed rolling-element bearings at both ends, ensuring minimal runout and extended fatigue life under the cyclic torsional loads typical of PTO-driven fertilizer spreader gearbox parts applications.

3. Bevel Gears
The precision-cut bevel gear pair achieves the 1:1.35 speed conversion ratio at the heart of this agricultural gearbox. Manufactured from case-hardened alloy steel with ground tooth profiles, these gears deliver efficient power transmission with minimal noise and heat generation. The bevel arrangement enables a 90-degree axis change between input and output shafts, a configuration essential for connecting horizontal PTO drive to vertically-mounted spinning disc assemblies on fertiliser spreaders.

4. Poros Keluaran
The output shaft (Z-axis, 1" 3/8 Z6 or 25 mm diameter cylindrical, depending on configuration) delivers the stepped-up rotational speed directly to the spreader disc hub or intermediate drive connection. Manufactured from high-tensile steel with surface hardening, the output shaft is rated for the full 9.9 kW output at 540 RPM input. Its mounting compatibility matches original Comer L-25A dimensions, allowing direct-fit replacement without modification to existing disc drive assemblies.

5. Bantalan
Heavy-duty tapered or deep-groove rolling element bearings support both the input and output shafts within the aluminium housing. Designed for radial and axial load capacity well beyond the L-25A's rated operating conditions, these bearings provide the precise shaft support necessary to maintain gear mesh alignment and prevent premature tooth wear. Pre-lubricated and sealed against moisture and fertiliser contamination, they require no independent maintenance beyond the standard gearbox oil change schedule.

6. Segel Oli
Radial lip seals fitted at each shaft exit point prevent internal SAE 80W-90 gear oil from leaking out and block the entry of external contaminants including water, fertiliser dust, and abrasive soil particles. The seals are manufactured from oil-resistant elastomer compounds specifically formulated for long-term compatibility with gear lubricants in agricultural conditions. Regular inspection of fertilizer spreader gearbox oil level and seal integrity is recommended during each major service interval to detect early wear.

7. Oil Fill, Level, and Drain Plugs
Dedicated plugs on the gearbox housing allow easy oil filling to the 0.35 L capacity mark, level checking, and clean oil drainage during scheduled changes. Correct fertilizer spreader gearbox oil level maintenance is critical to gear and bearing longevity. The plugs are positioned for accessible service without removing the gearbox from the machine, reducing service time. Magnetic drain plugs trap metallic wear particles from the oil, serving as an early warning indicator of internal component wear when inspected at each oil change.

Pemecahan Masalah Umum

Gearbox Overheating During Operation
Excessive heat build-up in the fertilizer gearbox is most commonly caused by insufficient oil level, incorrect oil viscosity, or an oil that has degraded beyond its service life. First, stop the machine and allow the unit to cool. Check the fertilizer spreader gearbox oil level through the level plug and top up to the correct mark with SAE 80W-90 if low. If oil is discoloured (dark brown or black) or contaminated with water, perform an immediate oil change. If overheating persists after correct oil fill, inspect the gear mesh for signs of abnormal wear or a damaged bearing.

Unusual Noise or Vibration
Grinding, clicking, or rumbling sounds from the agricultural gearbox during operation typically indicate bearing wear, gear tooth damage, or shaft misalignment with the PTO drive line. Immediately stop the spreader and disengage PTO. Inspect the PTO shaft connection for angular misalignment beyond the manufacturer's recommended operating angle. Check the gearbox mounting bolts for looseness. Remove the inspection cover and examine gears for chipped or pitted teeth. If internal damage is confirmed, replacement of affected bearings or gears from the fertilizer spreader gearbox parts catalogue is recommended before resuming work.

Oil Leakage Around Shaft Seals
Oil seeping from around the input or output shaft exit points indicates a worn or damaged radial lip seal. This is a common wear item on any fertiliser spreader gearbox operating in dusty or chemically harsh environments. Replace the relevant shaft seal using a seal driver tool appropriate to the shaft diameter. Clean all mating surfaces before fitting the new seal to ensure a proper seat. Overfilling the gearbox beyond the 0.35 L maximum capacity can also cause pressure build-up that pushes oil past otherwise healthy seals, so always verify correct fill volume after topping up.

Spreader Disc Speed Inconsistency
If the spreading discs are running at variable or reduced speed compared to normal operation, the first check should be tractor PTO shaft engagement and the condition of the connecting PTO driveshaft universal joints, which can seize or wear if lubrication is neglected. Internally, check that the fertilizer spreader gearbox ratio is producing the expected output speed by measuring output shaft RPM with a tachometer. Low output speed at correct PTO input speed may indicate worn bevel gear teeth, which require gear set replacement to restore normal performance.

Difficult or Stiff PTO Shaft Engagement
Resistance when connecting the PTO shaft to the L-25A input can indicate corrosion buildup on the 1" 3/8 Z6 splined input shaft, foreign material lodged in the spline, or a deformed PTO coupling yoke. Clean the input shaft splines thoroughly with a wire brush and apply a light coat of anti-seize grease or corrosion inhibitor to prevent future seizure. Inspect the PTO shaft yoke bore for wear or deformation that may have resulted from repeated engagement at incorrect alignment angles, which can also accelerate input shaft bearing wear over time.

Mounting Looseness or Vibration at Spreader Frame
Physical looseness of the gearbox on its mounting frame leads to driveline vibration, accelerated bearing wear, and eventual gear misalignment. Inspect all four mounting flange bolts (M10 or equivalent to match the 11 mm hole pattern) for correct torque specification. Thread-locking compound applied to mounting bolts is advisable in high-vibration applications. If the mounting flange face shows signs of fretting corrosion or surface damage from prolonged loose mounting, clean and treat the contact surfaces before re-torquing to prevent recurrence of the looseness issue.

Premature Gear or Bearing Failure
Early gear or bearing failure in a fertilizer spreader gearbox that has not reached its expected service life is almost always traceable to one of three root causes: operating at input powers exceeding the 8.1 kW maximum rating, running with insufficient or degraded oil, or sustained operation with PTO shaft misalignment beyond acceptable angles. Review the machine's operating conditions against the rated specifications. Confirm that the oil has been changed at the prescribed 50 to 70 hour initial interval and that SAE 80W-90 viscosity grade oil is being used, not a lighter automotive oil which lacks the load-carrying film strength required for gear lubrication.

Fertiliser Contamination of Gearbox Oil
Water-mixed fertiliser solutions or hygroscopic granular materials can draw moisture into the gearbox if seals are compromised, leading to oil emulsification and loss of lubricating film strength. Milky or grey-coloured oil at the drain is a clear indicator of water contamination. Drain and flush the gearbox, replace the contaminated oil with fresh SAE 80W-90, and identify the moisture ingress point, typically a worn shaft seal or a cracked housing. Timely attention prevents corrosive damage to polished gear tooth surfaces and bearing raceways.

Correct Maintenance of the L-25A Fertilizer Spreader Gearbox

Fertilizer Spreader Gearbox and PTO Drive Shaft

The fertilizer spreader gearbox is the critical mechanical interface between the tractor's Power Take-Off and the spreading mechanism of the fertiliser distribution machine. It receives raw rotational power from the tractor PTO, which typically operates at a standardised 540 RPM shaft speed, and converts this into the speed and torque output most appropriate for driving the spreading disc assembly. In the case of the L-25A, the 1:1.35 ratio steps the input speed up slightly to deliver faster disc rotation that improves granule throw distance and spreading pattern width, while maintaining tractable torque levels. The gearbox also performs a critical geometric function, changing the angle of power transmission from the horizontal PTO shaft axis to the vertical or angled disc drive axis using its internal bevel gear set, a function that would otherwise require a complex and unreliable chain or belt transmission arrangement. Fertilizer spreader gearboxes from reputable manufacturers like CMN Transmission are engineered to perform this power routing reliably for thousands of operating hours under the demanding and chemically hostile conditions of agricultural fertiliser application.

The PTO shaft is the mechanical driveshaft that physically connects the tractor's rotating PTO output stub to the input shaft of the fertilizer distributor gearbox. Most modern PTO shafts used with fertiliser spreading equipment are telescoping assemblies incorporating two or more universal joints (U-joints) that accommodate the angular and length changes that occur as the spreader moves over uneven ground or turns in the field. The L-25A gearbox accepts standard 1" 3/8 Z6 (six-spline) PTO shaft connections, which is the most common standardised tractor PTO interface in the 540 RPM category globally, ensuring broad compatibility across tractor makes and models from all major agricultural regions.

In operation, the tractor operator engages the PTO lever, which connects the tractor's transmission to the PTO output shaft at a specified speed (540 or 1000 RPM). The rotating PTO stub drives the connected PTO driveshaft, which transmits this rotation through its universal joints to the input shaft of the L-25A agricultural gearbox. The gearbox receives this rotation at up to 8.1 kW, converts it through the 1:1.35 bevel gear set, and delivers the stepped-up speed and torque output to the spreader disc or auger shaft. The disc then rotates at the higher output speed and throws granular fertiliser, lime, or seed outward in a controlled spreading pattern determined by disc shape, vane configuration, and exit speed. The entire system operates as a continuous mechanical power train, with the efficiency of each link, tractor PTO engagement, PTO driveshaft, and gearbox, directly affecting the consistency and quality of the spreading pattern achieved across the field.

Selecting the right PTO shaft to pair with the L-25A fertilizer spreader gearbox for sale is as important as the gearbox selection itself. The PTO shaft must be rated for at least the maximum power transmitted (8.1 kW at 540 RPM), with an appropriate safety factor for shock loads at PTO engagement. Length must be checked against the tractor-to-spreader distance at both minimum and maximum hitch extension, to ensure the shaft never bottoms out its telescopic tube or over-extends and separates. PTO shafts should incorporate a slip clutch or shear bolt protection device between the shaft and the gearbox input to interrupt torque if the spreading mechanism jams, protecting both the gearbox internals and the tractor PTO clutch from overload damage.

Mengapa Memilih Gearbox Penyebar Pupuk dari CMN Transmission?

Korea CMN Transmission Co., Ltd. was established in 2000 and is headquartered in Sandan-o, Danwon-gu, Ansan-si, Gyeonggi-do, Korea. Over more than two decades, CMN Transmission has grown from a focused agricultural gearbox manufacturer into one of the most trusted names among global fertilizer spreader gearbox manufacturers. With more than 100 factory employees dedicated to R&D, precision manufacturing, technical sales, and global after-sale service, the company has consistently delivered agricultural gearboxes that meet and exceed the demands of modern precision farming operations worldwide.

CMN Transmission exports to more than 60 countries across six continents, with active distribution channels in the United States, Canada, Mexico, Brazil, Argentina, France, Germany, Italy, Spain, the United Kingdom, Russia, China, India, Thailand, Vietnam, Turkey, Australia, New Zealand, and many more. This global reach is supported by a comprehensive product range spanning rotary cutter gearboxes, rotary tiller gearboxes, feed mixer gearboxes, rotary mower gearboxes, fertilizer spreader gearboxes, flail mower gearboxes, post hole digger gearboxes, round baler gearboxes, square baler gearboxes, disc mower gearboxes, centre pivot irrigation gearboxes, hydraulic drive gearboxes, silage machine gearboxes, orchard sprayer gearboxes, rotary rake gearboxes, combine harvester gearboxes, grain storage gearboxes, grain transportation gearboxes, corn header gearboxes, cutting bar gearboxes, poultry feeding gearboxes, and custom agricultural gearboxes covering nearly 1,000 specifications. This breadth makes CMN Transmission a one-stop source for fertilizer spreader suppliers and OEM machinery builders globally.

Annual production exceeds 500,000 units, supplying both global OEM agricultural machinery manufacturers and distribution networks with the consistent quality and long-term durability they depend on for customer satisfaction. CMN Transmission holds CE, ISO 9001, Environmental Management, and Occupational Health and Safety management system certifications, ensuring every agricultural gearbox for fertilizer spreader and other agricultural applications that leaves the factory conforms to internationally recognised engineering and quality standards.

Choosing CMN Transmission for your fertilizer spreader gearbox for sale requirements means partnering with a manufacturer that invests continuously in product R&D, maintains strict incoming material and outgoing product inspection protocols, and provides dedicated technical application support for customers worldwide. Whether you are sourcing a single replacement L-25A gearbox or building a large-scale OEM supply relationship for thousands of units per year, CMN Transmission has the manufacturing scale, quality systems, and global logistics capability to support your business reliably season after season.

Pertanyaan yang Sering Diajukan

Q1: Is the CMN L-25A a direct replacement for the Comer L-25A gearbox?
A: Yes. The CMN Transmission L-25A fertilizer spreader gearbox is engineered as a direct OEM-equivalent replacement for the Comer L-25A unit. All critical dimensions including the mounting flange bolt hole pattern (N.4 x diameter 11 mm), shaft diameters, and shaft lengths are matched to the original Comer specification. No machine frame modification, adaptor plates, or shaft machining is required for a standard direct swap installation.

Q2: What oil should I use in the L-25A fertilizer spreader gearbox?
A: The L-25A requires SAE 80W-90 gear oil with a maximum fill capacity of 0.35 litres. Use a mineral or synthetic EP (Extreme Pressure) gear oil meeting GL-4 or GL-5 specifications. Do not use engine oil, hydraulic oil, or grease as a substitute. Using the correct viscosity grade is critical for maintaining the protective lubricant film between bevel gear tooth surfaces at 540 RPM input speed. If operating in extreme low-temperature environments, consult CMN Transmission for alternative viscosity recommendations.

Q3: What is the correct fertilizer spreader gearbox oil level check procedure?
A: To check the fertilizer spreader gearbox oil level, ensure the machine is parked on level ground and the gearbox has cooled from operating temperature. Remove the oil level plug (located on the side of the housing) and check that oil is present up to the bottom of the level plug hole thread. If oil does not reach the level plug, add SAE 80W-90 through the top fill plug until oil begins to weep from the level plug hole, then refit both plugs securely. Never overfill beyond the level plug as excess oil creates internal pressure that can blow out shaft seals.

Q4: What fertilizer spreader gearbox ratio does the L-25A have, and what does it mean for spreading?
A: The L-25A has a 1:1.35 fertilizer spreader gearbox ratio. This is a speed-increasing ratio, meaning for every one revolution of the input shaft, the output shaft turns 1.35 times. At standard 540 RPM PTO input, the output shaft turns at approximately 729 RPM. This faster output speed drives spreading discs at a higher rotational velocity, increasing the centrifugal throw force on the fertiliser particles and achieving greater spreading width compared to a 1:1 direct drive gearbox, without requiring a higher tractor PTO speed.

Q5: Can the L-25A handle liquid fertilizers as well as granular products?
A: The L-25A agricultural gearbox is designed to drive the mechanical spreading mechanism, not to contact the fertiliser product directly. Its aluminium housing and sealed shaft design resist external exposure to fertiliser splatter from both granular and liquid product applications. For liquid fertiliser spreading systems using disc or boom spreaders, the gearbox performs the same power transmission function as in granular spreading. Ensure the external housing and seals are rinsed after liquid fertiliser sessions to prevent extended chemical contact with the housing surfaces.

Q6: How long does the L-25A fertilizer spreader gearbox last under normal farm use?
A: Under normal agricultural operating conditions with the prescribed oil changes (initial at 50 to 70 hours, then every 500 hours or annually), the L-25A fertilizer distributor gearbox is designed for a service life of several thousand operating hours. Actual longevity depends on operating within rated power limits, maintaining correct PTO shaft alignment, using the specified SAE 80W-90 oil, and adhering to the maintenance schedule. Operators who follow the recommended service routine consistently report gearboxes running well beyond 1,000 hours before requiring internal component attention.

Q7: What shaft configurations are available for the L-25A?
A: The L-25A family, as detailed in the Comer catalogue and matched by CMN Transmission, is available in multiple shaft configurations. The input shaft (X) accepts a 1" 3/8 Z6 six-spline PTO connection or a 25 mm cylindrical shaft depending on configuration. Output shafts (Y and Z positions) are available in 1" 3/8 Z6 spline, 22 mm, or 25 mm cylindrical formats at various lengths, allowing adaptation to different spreader disc hub interfaces. Contact CMN Transmission to confirm the exact shaft configuration required for your specific spreader model before ordering.

Q8: Is a PTO shaft included with the L-25A gearbox purchase?
A: No, the L-25A fertilizer gearbox is supplied as a standalone unit without a PTO driveshaft. The connecting PTO shaft must be selected separately based on the tractor-to-machine distance and power requirements. CMN Transmission can advise on compatible PTO shaft specifications on request. When selecting a PTO shaft for use with the L-25A, ensure it is rated for at least the maximum 8.1 kW input power and incorporates a slip clutch or shear bolt overload protection device for safe operation.

Q9: Where can I buy the L-25A fertilizer spreader gearbox and what is the lead time?
A: The L-25A fertilizer spreader gearbox for sale is available to order directly from CMN Transmission through this product page, or via our authorised distributor network in the United States, Canada, Europe, Australia, and other major agricultural markets. Standard lead time for in-stock units is 1 to 3 business days for domestic orders, with international shipping times varying by destination. Contact our sales team for express shipping options or bulk order pricing for dealer and OEM customers.

Q10: What certifications does CMN Transmission hold for the L-25A gearbox?
A: CMN Transmission holds CE marking (confirming conformity with European safety standards), ISO 9001 quality management system certification, Environmental Management certification, and Occupational Health and Safety certification. These accreditations demonstrate that the L-25A fertiliser spreader gearbox is manufactured under a verified and audited quality management system, providing customers with confidence in product consistency, dimensional accuracy, and material traceability across all production batches.

Ulasan Pelanggan

James, Corn and Soybeans, United States
"We run a mixed arable operation here in Iowa and had our original Comer box fail right at the start of the spring spreading season. CMN Transmission had the L-25A in stock and it shipped within 48 hours. Dropped straight in without a single modification needed. Been running it for two seasons now and it handles urea and MAP without any issues at all. Build quality feels solid compared to what we had before. Very happy with the purchase."

Michael, Crop Farming, Canada
"I ordered two units of the L-25A gearbox for our spreader setup on the farm in Saskatchewan. The 1:1.35 ratio is exactly what our spreader needed. Delivery came to Calgary in about 12 days which was actually faster than I expected. One thing I really appreciated was the technical support team answering my questions about oil fill before commissioning. No issues so far after one full spring and one fall season. Would order no question again."

Carlos, Soybean and Cotton, Brazil
"We work with fertilizer spreaders on our farm in Mato Grosso and needed a reliable replacement for our Comer L-25A. CMN Transmission delivered quickly and the product fit perfectly. We have already used it for about 300 hours distributing urea and potassium without any leaks or overheating. The light weight of 4.1 kg makes maintenance in the field much easier. I only deducted one star because the promised delivery time was delayed a bit. Overall great product."

Luis, Wheat and Soybeans, Argentina
"We have been using this gearbox on our fertilizer spreaders in Cordoba for the last three agricultural cycles. The 1:1.35 ratio gives us exactly the application width we are looking for with wheat and soybeans. The aluminum housing has held up well even with mixed liquid fertilizers. The first time we used it we changed the oil at 60 hours as indicated by the instructions and since then the gear has worked perfectly. Very good product, we recommend it."

David, Crop Farming, United Kingdom
"We run a contract spreading operation in North Yorkshire and needed a reliable replacement gearbox mid-season. CMN Transmission dispatched the L-25A within 24 hours and it arrived next morning. Fitted it on the spreader trailer same day and we were back in the field by afternoon. The quality of the aluminium housing and internal gears looks as good as any OEM unit I've used. Five months on and there's no issues at all. Good value, brilliant service, and an excellent product for the price point."

Pierre, Pertanian Tanaman, Prancis
"We have been using this gearbox on our spreaders in Beauce for two seasons now. The 1:1.35 ratio is perfectly suited for our fertilizer spreaders. The manufacturing quality is excellent and the aluminum casing is well protected against corrosive fertilizers. We ordered three units in total and all of them are working without any problems. The technical support at CMN Transmission is very responsive; they answered all our questions quickly. Very good product."

Klaus, Agricultural Equipment, Germany
"As a dealer for agricultural equipment parts in Bayern, I've sourced these L-25A gearboxes from CMN Transmission for several of our customers. The fitment accuracy compared to original Comer units is spot on, our customers have all reported trouble-free installation. The consistent quality across the batches we have received and the competitive pricing has made this our go-to recommendation for Comer L-25A replacement. CMN Transmission's documentation is also well done, which helps our customers with first-time service."

Andrew, Agricultural Equipment, Australia
"We supply and service fertilizer spreading machinery in Victoria and New South Wales and CMN Transmission is now our preferred source for L-25A replacement gearboxes. The unit quality is consistent, delivery to Australia is reasonable, and the gearbox handles the conditions here well, including the heat and the abrasive fertiliser blends used for broad-acre spreading. Had one customer run his L-25A for over 800 hours before a scheduled service and the gearbox internals looked excellent on inspection. Really impressed with the longevity."

Roberto, Agricultural Machinery, Mexico
"We are an agricultural machinery service company in central Mexico and we have installed several of these gearboxes in our clients' fertilizer spreaders. The 1:1.35 transmission ratio works well with the discs of the European equipment we have in our area. The quality is good and the price is very competitive compared to the original spare parts. We deducted one star because sometimes the international shipping time is a bit long, but the product itself is excellent."