Select Page

CMN-9.311-JCG Flail Mower Gearbox Ratio 1:3 50 HP 540 RPM Right Angle PTO Gearbox

The CMN-9.311-JCG flail mower gearbox is a right angle PTO gearbox built for tractors rated up to 50 HP, converting the standard 540 RPM power take-off input into lower rotor speed at a fixed 1:3 reduction. Constructed from nodular cast iron with precision-ground bevel gears (36/12 teeth, module 4.35), this agricultural flail mower gearbox absorbs the constant vibration and impact loads that come with cutting dense grass, weeds, crop stubble, and light brush.

The CMN-9.311-JCG flail mower gearbox is a right angle PTO gearbox built for tractors rated up to 50 HP, converting the standard 540 RPM power take-off input into lower rotor speed at a fixed 1:3 reduction. Constructed from nodular cast iron with precision-ground bevel gears (36/12 teeth, module 4.35), this agricultural flail mower gearbox absorbs the constant vibration and impact loads that come with cutting dense grass, weeds, crop stubble, and light brush. The reinforced housing keeps dust, plant debris, and moisture away from the internal gear train and bearings, while the double-lip oil seals retain lubricant under prolonged field operation. With a net weight of only 21 kg, the unit keeps total implement weight manageable on compact and mid-size tractors.

Fourteen interchangeable output shaft lengths (375 mm through 1,500 mm) make this tractor flail mower gearbox compatible with a wide range of flail drum widths, from narrow vineyard mowers to full-width pasture shredders. The input shaft accepts the universal 1 3/8" six-spline PTO coupling found on most agricultural tractors worldwide, so installation requires no adapters or custom machining. Whether you manage livestock pastures, maintain roadside verges, or clear vineyard and orchard undergrowth, the CMN-9.311-JCG delivers the torque and reliability that professional operators depend on season after season. CMN Transmission backs every unit with CE and ISO 9001 certification, global parts availability, and responsive technical support.

CMN-9.311-JCG Flail Mower Gearbox

Technical Parameters

ModelCMN-9.311-JCG
Ratio1:3
Teeth36/12
Module4.35
Power (HP)50 HP
Rated Input540 rpm
Input/Output Description1 3/8 Z6 / Optic axis
Weight (Kg)21 Kg

We have completed a third-party supplier audit and company verification supported by SGS / TÜV Rheinland. This verification helps buyers review company identity, business operations, supplier profile and general manufacturing capability. Product-specific inspection reports, material documents or compliance records can be provided according to order requirements.

Minimum Order Quantity (MOQ): Flexibly set based on the product type and order amount.

Samples: New customers may request 1–5 samples under appropriate circumstances.

Mixed Orders: Combining different models is supported; the total order amount must reach approximately $1,500.

Small Orders: Orders starting from 1–2 pieces are supported, but the unit price will be relatively higher.

Lead Time: 10–25 working days for standard parts; 20–45 working days for customized components; 45–120 working days for project-based equipment.

Trade Terms: EXW, FOB, CIF, and DAP are generally supported; FCA, CFR, CPT, CIP, and DDP terms can be specifically negotiated.

CMN-9.311-JCG Flail Mower Gearbox Dimensions

CMN-9.311-JCG Flail Mower Gearbox Dimensions

Length-1-2-3-4-5-6-7-8-9-10-11-12-13-14
L (mm)375500615670700780810950106011401200125013501500
L1 (mm)2203454605155456256557959059851045109511951345

Key Features of the CMN-9.311-JCG Flail Mower Gearbox

1. Power Transmission and Speed Conversion
This 540 RPM flail mower gearbox converts the tractor PTO speed at a fixed 1:3 flail mower gearbox ratio, reducing the output to approximately 180 RPM while tripling the torque delivered to the flail drum. The precision bevel gear pair (36 and 12 teeth) guarantees smooth meshing, low noise, and stable rotor speed even when the flails encounter heavy vegetation patches or uneven ground. Consistent torque output prevents the rotor from stalling under sudden load spikes, ensuring clean and uniform chopping across the full cutting width of the implement.

2. Durability and Structural Protection
Built from nodular cast iron with a corrosion-resistant finish, the heavy duty flail mower gearbox housing absorbs shock and vibration from impact with stones, stumps, and hidden obstacles. Internal gears and shafts are quenched and tempered for high surface hardness, extending service intervals significantly compared to softer alloy alternatives. Each unit passes a full load bench test before shipment, confirming that the gear train, bearings, and seals perform within specification under sustained 50 HP input at the rated 540 RPM speed.

3. Sealing and Corrosion Resistance
Reinforced double-lip flail mower gearbox oil seals on both the input and output shafts prevent lubricant leakage while blocking dust, plant sap, and moisture from entering the gear chamber. The housing is treated with a rust-inhibiting coating that withstands prolonged exposure to damp grass, acidic soil, and agricultural chemicals. High-quality flail mower gearbox bearings are pre-packed with grease and sealed to maintain their own lubrication, reducing maintenance frequency and protecting the entire assembly from corrosion in humid field environments.

4. Modular Output Shaft System
The CMN-9.311-JCG offers 14 output shaft length variants ranging from 375 mm to 1,500 mm, covering virtually every commercial flail mower drum width on the market. Each smooth (optic axis) output shaft is ground to tight tolerances, allowing direct coupling to flail drums, pulleys, or couplings without additional machining. This modular design means a single gearbox model can serve as a flail mower gearbox replacement for many implement brands, simplifying parts inventory for dealers and workshops that service mixed fleets.

5. Safety and Overload Protection
The gearbox is designed to pair with industry-standard slip clutches, shear bolts, or torque-limiting devices installed on the PTO driveline shaft. If the flail rotor jams on a large rock, fence post, or buried debris, the overload protection device interrupts torque before the gear train absorbs a damaging shock. This arrangement protects both the gearbox internals and the tractor driveline, preventing costly repairs and unplanned downtime during the mowing season when every working hour counts.

6. Universal Compatibility
The 1 3/8" six-spline (Z6) input shaft matches the PTO output found on the vast majority of agricultural tractors sold in North America, Europe, Australia, and Asia. No adapters, bushings, or custom couplings are needed for a standard hookup. The bolt pattern and housing dimensions follow common industry mounting standards, allowing this flail mower PTO gearbox to bolt directly onto many popular 3 point flail mower frames as a factory-fit or aftermarket replacement without structural modification to the implement.

Flail Mower Gearbox

How the CMN-9.311-JCG Flail Mower Gearbox Works

A flail mower gearbox is a mechanical speed reducer that sits between the tractor and the cutting rotor. Its core function is to accept high-speed, lower-torque rotation from the tractor's power take-off and convert it into lower-speed, higher-torque rotation suitable for driving a flail drum. Inside the CMN-9.311-JCG, this conversion is handled by a pair of spiral bevel gears arranged at a 90-degree angle, which is why the unit is classified as a right angle gearbox. The smaller 12-tooth pinion gear is mounted on the input shaft and meshes with the larger 36-tooth ring gear on the output shaft. Because the output gear has three times as many teeth as the input pinion, the output shaft turns at one-third of the input speed while delivering three times the torque.

In practical field operation, the process begins when the tractor operator engages the PTO, sending 540 RPM rotational energy through the PTO driveline shaft to the gearbox input. The input shaft, coupled to the PTO driveline via a 1 3/8" six-spline connection, spins the pinion gear at 540 RPM. As the pinion teeth engage the ring gear, the speed drops to roughly 180 RPM at the output shaft, and the torque increases proportionally. This output shaft, which extends from the bottom or side of the gearbox depending on the mounting orientation, connects directly to the flail mower's rotor drum. The drum carries multiple swinging flail blades (also called knives or hammers) attached by pivoting links. As the drum spins at the reduced speed, each flail swings outward under centrifugal force and strikes vegetation with tremendous cutting energy.

The right-angle gear configuration is not just a packaging convenience. By redirecting the axis of rotation by 90 degrees, the gearbox allows the PTO driveline to run horizontally from the tractor while the flail drum rotates on a horizontal axis perpendicular to the direction of travel. This layout is fundamental to how flail mowers operate; without the angular redirection, the implement would require a complex belt or chain system to change the plane of rotation, adding weight, friction losses, and maintenance burden.

Inside the housing, flail mower gearbox oil fills the gear chamber to a specified level, providing continuous splash lubrication to the gear teeth and tapered roller bearings. As the gears rotate, they pick up oil from the sump and distribute it across the meshing surfaces and bearing races. This splash system requires no external pump or plumbing, keeping the design simple and reliable. Proper oil level and regular oil changes are the single most important maintenance steps for preserving the gear train. CMN Transmission recommends EP 90 gear oil filled to the inspection plug level, with the first oil change at 50 hours of operation and subsequent changes every 200 hours or annually, whichever comes first.

Flail Mower Gearbox

Application Areas

Pasture Maintenance and Vegetation Shredding

The gearbox powers the flail drum to cut and mulch grass, weeds, clover, and crop residues across livestock pastures and hay fields. Farmers rely on the consistent 1:3 speed reduction to produce a fine, even mulch that decomposes rapidly and returns nutrients to the soil. Regular pasture topping with a tractor flail mower gearbox setup keeps weed species from seeding and promotes healthy regrowth of desirable forage grasses throughout the growing season.

Brush and Bramble Control

Where dense brush, brambles, and saplings up to 25 mm in diameter need clearing, the high-torque output of the CMN-9.311-JCG provides the cutting force that standard rotary mowers cannot match. The 50 HP rating and 1:3 ratio deliver enough energy at the flail tips to shred woody stems into small chips, eliminating the need for a separate chipper or manual clearing. Land reclamation contractors and forestry operations frequently use heavy duty flail mower gearbox setups for this type of vegetation management work.

Vineyard and Orchard Under-Row Mowing

Compact flail mowers fitted with offset arms reach beneath vine rows and fruit tree canopies where conventional mowers cannot operate. The gearbox's short output shaft options (375 mm and 500 mm variants) and lightweight 21 kg design suit narrow-row implements that must navigate tight spaces at low speeds. Vineyard managers in France, Italy, Spain, and California depend on this setup to control cover crops and undergrowth without disturbing the root zone of high-value plantings.

Roadside and Municipal Verge Maintenance

Municipal road crews and highway maintenance contractors mount flail mowers on tractor arms to trim grass, weeds, and low scrub along roadsides, medians, and embankments. The gearbox must handle frequent encounters with litter, gravel, and concealed hard objects without damage to the gear train. The CMN-9.311-JCG's cast iron housing and reinforced seal system make it well suited for these environments, where debris impact and exposure to road salt accelerate wear on lesser units.

Stubble and Crop Residue Management

After grain harvest, shredding standing stubble accelerates decomposition and prepares the field for the next tillage or planting pass. The 1:3 reduction delivers enough flail tip speed to chop stiff cereal stalks, corn stover, and sunflower stems into short segments that break down quickly in contact with the soil surface. Using this agricultural flail mower gearbox for residue work reduces the number of tillage passes required, saving fuel, labor, and time during busy planting windows.

Solar Farm and Utility Corridor Vegetation Control

Solar energy installations and electrical utility corridors require regular vegetation management to prevent panel shading and maintain access to transmission infrastructure. Flail mowers powered by the CMN-9.311-JCG provide a clean, low-scatter cut that minimizes the risk of throwing stones into solar panels or cables, a significant advantage over open-blade rotary cutters. The gearbox performs reliably through long shifts in hot weather, maintaining consistent cutting quality across large acreages.

Sports Turf and Amenity Grassland

Grounds managers for golf courses, sports fields, and public parks use flail mowers for rough-area cutting, scarifying, and thatch removal. The flail mower gearbox assembly must run smoothly at consistent RPM to avoid scalping or uneven cutting on turf that must look presentable. The CMN-9.311-JCG's low-vibration bevel gear mesh and tight output shaft tolerances contribute to a uniform cut height, while the gearbox's quiet operation is an asset in noise-sensitive environments close to residential or recreational areas.

Land Clearing and Site Preparation

Before construction or planting, overgrown plots often need heavy vegetation removal. Flail mowers equipped with the CMN-9.311-JCG can tackle mixed growth including tall grass, nettles, ferns, and light scrub in a single pass, leaving a mulched surface ready for further site work. The 14 output shaft length options let contractors match the gearbox to wide-deck implements for maximum productivity, reducing the passes needed to clear large parcels ahead of earthmoving or seeding operations.

Flail Mower Gearbox Applications

How to Install the CMN-9.311-JCG Gearbox on Flail Mower

Step 1: Inspect the New Gearbox Before Mounting
Remove the gearbox from its packaging and inspect the housing, input shaft splines, output shaft surface, and all seal areas for shipping damage. Turn the input shaft by hand to confirm that the gears rotate smoothly with no binding, grinding, or excessive play. Verify that the correct output shaft length variant has been supplied by measuring from the housing face to the shaft end. Check the oil level through the inspection plug; CMN ships the gearbox pre-filled with EP 90 gear oil, but confirm the level before installation.

Step 2: Prepare the Mower Frame Mounting Surface
Clean the mounting plate or flange on the flail mower frame, removing any rust, old gasket material, paint buildup, or debris that could prevent the gearbox from seating flat. Check the bolt hole positions against the gearbox housing flange; the CMN-9.311-JCG follows standard industry bolt patterns, but older or non-standard implements may need pilot holes reamed or adapter plates fabricated. A flat, clean mounting surface ensures even clamping force and prevents housing distortion that could misalign the bearings.

Step 3: Position and Bolt the Gearbox to the Frame
Lift the gearbox into position using a hoist, overhead crane, or two-person lift. At 21 kg, the unit is manageable but awkward to handle alone due to its shape. Align the output shaft with the flail drum hub or coupling, then slide the mounting bolts through the flange holes. Install all bolts hand-tight before torquing them in a cross pattern to the implement manufacturer's specification. Even clamping prevents the housing from racking and ensures the output shaft remains concentric with the drum bearing.

Step 4: Connect the Output Shaft to the Flail Drum
Slide the flail drum hub onto the smooth output shaft and secure it with the keyway, set screws, or clamping collar specified by the mower manufacturer. Verify that the drum spins freely with no interference from the housing, frame, or skids. Check the shaft alignment by measuring the gap between the drum end plate and the gearbox face at multiple points; a consistent gap indicates proper alignment. Misalignment at this connection accelerates output bearing and seal wear, leading to early failure and oil leaks.

Step 5: Attach the PTO Driveline Shaft
Slide the PTO driveline yoke onto the 1 3/8" six-spline input shaft and lock it in place with the yoke locking pin or collar. Confirm that the driveline shaft length is correct for the working distance between the tractor PTO and the gearbox input; the driveline should be telescoped approximately halfway, leaving travel in both directions for the three-point hitch movement. Verify that the universal joint operating angles stay within the driveline manufacturer's recommended range (typically below 15 degrees) in both the raised and lowered implement positions.

Step 6: Check the Oil Level and Fill if Necessary
With the gearbox installed in its operating orientation, remove the oil level (inspection) plug and confirm that flail mower gearbox oil is visible at the plug hole. If the level is low, add EP 90 gear oil until it just reaches the inspection port. Do not overfill; excess oil increases internal pressure, pushes past seals, and can cause foaming that reduces lubrication effectiveness. Reinstall the plug and hand-tighten it; over-torquing brass or nylon plugs can strip the threads in the cast iron housing.

Step 7: Perform a Low-Speed Test Run
With the implement off the ground and all personnel clear of the flail drum, engage the tractor PTO at low RPM (approximately 300 RPM) and let the gearbox run for two to three minutes. Listen for unusual noise such as grinding, whining, or clicking that could indicate a gear mesh issue or bearing defect. Watch for oil leaks at all seals, plugs, and gasket joints. If everything is clear, gradually increase to the full 540 RPM operating speed and run for another five minutes while monitoring temperature and noise before beginning field work.

Flail Mower Gearbox

Common Faults and Troubleshooting

Oil Leaking from the Output Shaft Seal

Cause: Worn or damaged flail mower gearbox oil seal, overfilled oil level, or a blocked breather vent creating excess internal pressure. Solution: Replace the output shaft seal with a genuine CMN replacement seal kit. Check and correct the oil level to the inspection plug height. Clean or replace the breather vent. Inspect the output shaft surface for scoring; a scored shaft will destroy new seals quickly and may require shaft replacement or sleeve repair.

Excessive Noise or Vibration During Operation

Cause: Worn or chipped gear teeth, bearing failure, or loose mounting bolts that allow the housing to shift under load.
Solution: Drain the gearbox oil and inspect for metal particles, which indicate gear or bearing wear. Check mounting bolt torque and retighten to specification. If the gears are visibly damaged or the bearings have excessive play, the gearbox needs a rebuild with new gears, bearings, and seals. CMN offers complete flail mower gearbox parts kits for this purpose.

Gearbox Overheating

Cause: Insufficient oil level, wrong oil type, overloading the gearbox beyond its 50 HP rating, or a blocked breather vent trapping heat inside the housing.
Solution: Check and refill with the correct EP 90 gear oil to the inspection plug level. Reduce the PTO speed or mowing ground speed if the tractor is delivering more than 50 HP to the implement. Clear the breather vent. If the gearbox has been run dry or at high temperature, inspect the bearings and gears for heat discoloration before resuming work.

Input Shaft Spline Wear

Cause: Inadequate greasing of the PTO driveline yoke connection, misaligned driveline angles, or prolonged operation with a loose yoke fit.
Solution: Grease the spline connection at every service interval using EP lithium grease. Check the PTO driveline alignment and U-joint angles. If the input shaft splines are visibly worn or rounded, the shaft must be replaced. Continuing to run a worn spline connection causes hammering that damages both the shaft and the driveline yoke.

Output Shaft Does Not Turn When PTO Is Engaged

Cause: Stripped gear teeth, a sheared key on the output shaft, or a failed torque limiter on the driveline that is slipping continuously. Solution: First check the driveline torque limiter or shear bolt; replace a sheared bolt or reset the slip clutch. If the driveline is delivering rotation to the input shaft but the output shaft is stationary, the internal gears or the output key have failed. Disassemble the gearbox, replace damaged components, and reassemble with new seals and bearings.

Water or Dirt Contamination in the Oil

Cause: Failed seals, a damaged or missing breather vent cap, cracked housing, or washing the implement with high-pressure water directed at the seal areas.
Solution: Drain the contaminated oil immediately. Flush the housing with clean gear oil. Replace all seals and the breather vent. Inspect the housing for cracks, particularly around the mounting flange and plug threads. Refill with fresh EP 90 oil. Avoid directing pressure washers at seal locations during implement cleaning.

Housing Crack or Fracture

Cause: Severe impact (rock strike, collision with a stump or post), overtightened mounting bolts causing stress concentration, or a manufacturing defect in rare cases.
Solution: A cracked housing cannot be safely repaired in the field. Replace the complete gearbox housing or the entire gearbox unit. If the crack resulted from an impact event, also inspect the gears, bearings, and shafts for hidden damage before reinstalling the implement. Contact CMN Transmission for a flail mower gearbox replacement unit or housing component.

Flail Mower Gearbox

Flail Mower Gearboxes and PTO Drive Shafts

The flail mower gearbox sits at the implement end of the power train. It accepts the PTO rotation, reduces the speed, increases the torque, and redirects the output axis by 90 degrees to drive the flail rotor drum. The CMN-9.311-JCG performs this task at a 1:3 ratio with a 50 HP capacity, using precision bevel gears inside a sealed, lubricated cast iron housing. Without the gearbox, there would be no practical way to convert the high-speed tractor PTO output into the controlled, high-torque rotation that the flail drum needs for effective cutting and mulching.

A PTO drive shaft for a flail mower is a mechanical driveline that transfers rotational power from the tractor's power take-off stub to the gearbox input shaft. It typically consists of a telescopic tubular shaft with universal joints (U-joints) at each end, a protective guard tube, and splined yoke connections that match the tractor PTO stub at one end and the gearbox input shaft at the other. The telescoping section allows the shaft to change length as the three-point hitch raises and lowers the implement, while the universal joints accommodate angular misalignment between the tractor PTO and the gearbox input axis. Standard agricultural PTO driveline shafts for the 540 RPM speed class use 1 3/8" six-spline connections at both ends, matching the input of the CMN-9.311-JCG directly.

The PTO driveline shaft and the flail mower gearbox form a continuous mechanical link between the tractor engine and the cutting rotor. When the operator engages the PTO, the tractor's transmission drives the PTO stub at 540 RPM. The PTO drive shaft picks up this rotation and carries it to the gearbox, compensating for any angle or distance variation between the two connection points. At the gearbox end, the splined yoke slides onto the 1 3/8" Z6 input shaft and locks in place, creating a positive rotational connection. The gearbox then reduces the speed and amplifies the torque before passing it to the flail drum through the output shaft.

Proper sizing and maintenance of the driveline shaft are critical for the gearbox to perform correctly. The shaft must be rated for the tractor's PTO horsepower output, with torque capacity matching or exceeding the 50 HP rating of the gearbox. The operating angle of the universal joints should stay within the manufacturer's recommended limits (usually below 15 degrees) across the full range of hitch travel. Excessive U-joint angles cause cyclic speed variations that place additional stress on the gearbox input bearings and gears. The telescopic section should allow enough travel so the shaft is never fully collapsed or fully extended during operation, preventing binding or separation.

PTO Shaft

Flail Mower Gearbox vs. Rotary Cutter Gearbox

What Is a Flail Mower Gearbox?

A flail mower gearbox transmits power from the tractor PTO or engine to a horizontally mounted flail rotor. The internal gear system regulates speed and torque to match the cutting requirements of different vegetation types and terrain conditions. Spiral bevel gears redirect the rotation by 90 degrees, converting the horizontal PTO axis into the axis required by the flail drum. The heavy-duty housing, precision gears, and reinforced seals ensure consistent cutting performance and long service life even in abrasive, debris-laden environments. Flail mower gearboxes typically operate at ratios between 1:1 and 1:3, with the 1:3 ratio being the most common choice for standard pasture and vegetation management applications running at the standard 540 RPM PTO speed.

Advantages of Flail Mower Gearbox

  • Fine, even mulch distribution. The swinging flails produce small, uniform cuttings that decompose faster than the large pieces left by rotary blades, returning nutrients to the soil more quickly and reducing thatch buildup on managed turf and pasture.
  • Reduced projectile risk. Because flail blades are enclosed within the drum housing, stones and debris are far less likely to be thrown outward compared to open-deck rotary cutters, making flail mowers safer for roadside work and operation near buildings, vehicles, and pedestrians.
  • Superior ground-following ability. The flail drum can float over uneven terrain without scalping high spots or missing low spots, producing a consistent cut height across rough pastures, ditches, and slopes where a fixed rotary deck would leave an uneven finish.
  • Lower impact damage to the gearbox. If a flail strikes a solid obstacle, the individual flail pivots away on its chain link, absorbing the shock. A rotary blade, by contrast, transmits the full impact force directly through the spindle and gearbox, increasing the risk of internal gear or bearing damage.

Applications of Flail Mower Gearbox

  • Pasture topping and grassland maintenance on dairy, beef, and sheep farms where a fine mulch improves subsequent regrowth quality and reduces weed pressure across the grazing season.
  • Vineyard and orchard inter-row mowing where compact implement widths and low scatter risk protect high-value crops from debris damage and mechanical injury.
  • Roadside and embankment maintenance by municipal crews and highway departments, where operator safety and low scatter risk are regulatory requirements in many jurisdictions.
  • Sports turf renovation including thatch removal, rough-area mowing, and scarifying on golf courses, sports pitches, and public parks where a presentable finish is expected.

What Is a Rotary Cutter Gearbox?

A rotary cutter gearbox is the central power transmission component in a rotary cutter (also known as a bush hog or slasher). Built to handle high torque and sudden shock loads, the gearbox drives one or more large, free-swinging blades that spin on a vertical axis beneath a steel deck. The input shaft connects to the tractor PTO, and the output shaft points downward to the blade carrier. Inside the housing, a set of precisely engineered gears transfers power while reducing speed, allowing the blades to cut through tall grass, brush, and saplings. Rotary cutter gearboxes are designed for brute-force clearing work where cut quality is secondary to the ability to handle heavy, overgrown vegetation and rough terrain.

Advantages of Rotary Cutter Gearbox

  • High blade tip speed and momentum. The large-diameter blades rotating at high speed can cut through thick brush, saplings, and dense weeds that would wrap around or stall a flail mower drum.
  • Simple blade maintenance. Rotary cutter blades are inexpensive, easy to sharpen, and quick to replace compared to the multiple individual flails on a flail mower, reducing shop time between jobs.
  • Lower initial cost. For rough mowing and clearing tasks where cut quality is not critical, rotary cutters and their gearboxes offer a more economical entry point than equivalent-width flail mower setups.
  • Wide cutting widths available. Multi-blade, wing-fold rotary cutters can span 4.5 meters or more, covering large areas quickly during seasonal clearing and field-edge trimming operations.

Applications of Rotary Cutter Gearbox

  • Grass cutting and crop residue shredding on broad-acre farms, where the gearbox ratio determines blade speed and the coarseness of the chopped material returned to the field.
  • Brush and woody-stem clearing on undeveloped land, fencerows, and ditch banks, where high-torque gearboxes handle the shock loads from cutting small trees and dense scrub.
  • Stubble management and field preparation after harvest, clearing stalks before tillage or planting with minimal passes.
  • Orchard and vineyard alley work using low-profile, compact rotary cutter designs that fit narrow rows and constrained spaces between tree and vine rows.

Comparison Table:

FeatureFlail Mower GearboxRotary Cutter Gearbox
Output AxisHorizontal (parallel to ground)Vertical (perpendicular to ground)
Typical Ratio Range1:1 to 1:31:1 to 1:2
Cut QualityFine, even mulchCoarse, rough cut
Projectile RiskLow (enclosed drum)Higher (open deck)
Ground FollowingExcellent (floating drum)Moderate (fixed deck height)
Heavy Brush CapabilityModerate (up to ~25 mm stems)Strong (saplings up to 75 mm+)
Blade MaintenanceMultiple flails to inspect/replace1 or 2 blades, easy to swap
Best Suited ForPasture, verge, vineyard, turfBrush clearing, rough mowing
CMN-9.311 Flail Mower GearboxRC-30 Rotary Cutter Gearbox

Why Choose CMN Transmission's Flail Mower Gearboxes?

Korea CMN Transmission Co., Ltd. was established in 2000 and is headquartered in Sandan-o, Danwon-gu, Ansan-si, Gyeonggi-do, Korea. With more than 100 factory employees dedicated to research, development, manufacturing, sales, and after-sales service, CMN Transmission has built its reputation as a reliable supplier in the global agricultural gearbox industry over the past two decades. Our products are exported to over 60 countries and regions worldwide, including the United States, Canada, Mexico, Brazil, Argentina, France, Germany, Italy, Spain, the United Kingdom, Russia, China, India, Thailand, Vietnam, Turkey, Australia, and New Zealand.

Our product line covers a broad spectrum of agricultural power transmission solutions: rotary cutter gearboxes, rotary tiller gearboxes, feed mixer gearboxes, rotary mower gearboxes, fertilizer spreader gearboxes, flail mower gearboxes, post hole digger gearboxes, round baler gearboxes, square baler gearboxes, disc mower gearboxes, center pivot irrigation gearboxes, hydraulic drive gearboxes, silage machine gearboxes, orchard sprayer gearboxes, rotary rake gearboxes, combine harvester gearboxes, grain storage gearboxes, grain transportation gearboxes, corn header gearboxes, cutting bar gearboxes, poultry feeding gearboxes, and custom agricultural gearboxes covering nearly one thousand specifications. We also supply PTO shafts, U-joints, yokes, tubes, torque limiters, covers, adapters, couplings, bearings, blades, chains, and sprockets.

With an annual production volume exceeding 500,000 units, CMN Transmission delivers consistent quality and reliable performance for global OEMs, distributors, and end users. Every product is manufactured under CE and ISO 9001 certified management systems, ensuring that each gearbox, shaft, and component meets strict quality standards from raw material inspection through final assembly testing.

What sets CMN apart from other gearbox suppliers is our combination of manufacturing scale, technical flexibility, and customer-focused service. We support custom production based on customer drawings and specifications for agricultural gearboxes, PTO shafts, and various agricultural machinery components. Whether you need a single replacement gearbox for a farm workshop or a container load of custom-spec units for an OEM production line, CMN Transmission has the engineering capability, production capacity, and logistics experience to deliver on time and within budget.

When you choose CMN Transmission for your flail mower gearbox needs, you gain access to decades of specialized agricultural gearbox knowledge, a comprehensive spare parts network, responsive technical support, and competitive pricing backed by genuine CE and ISO certifications. Our extensive experience providing technical solutions for global agricultural machinery partners means we understand the demands your equipment faces in the field, and we build every gearbox to meet those demands reliably, season after season.

Rotary Tiller Gearbox Manufacturers

Frequently Asked Questions

Q: What type of oil should I use in a flail mower gearbox?
A: CMN Transmission recommends EP 90 (or EP 80W-90 for cold-climate operation) gear oil for the CMN-9.311-JCG. Fill the gearbox to the inspection plug level. The oil should meet GL-4 or GL-5 specifications. Avoid using engine oil, hydraulic fluid, or grease in place of proper flail mower gearbox oil, as these products lack the extreme-pressure additives needed to protect bevel gear teeth under heavy loads. Check the oil level before each use and perform a full oil change at 50 hours for new gearboxes and every 200 hours or annually thereafter.

Q: Can this gearbox fit my specific flail mower model?
A: The CMN-9.311-JCG is built to common industry dimensions and uses a standard 1 3/8" six-spline PTO input, making it compatible with many European, North American, and Asian flail mower brands in the 30 to 50 HP range. With 14 output shaft lengths available, most drum-to-gearbox distances can be matched. To confirm fitment, measure your existing gearbox housing bolt pattern, input spline size, output shaft diameter and length, and compare these to the CMN-9.311-JCG specifications. Contact our technical team with your mower model and measurements for a compatibility check before ordering.

Q: How often should I replace the flail mower gearbox oil seal?
A: Under normal operating conditions, oil seals last 500 to 1,000 hours before they begin to show wear. Inspect the seals at every oil change for signs of weeping, cracking, or hardening. If you notice any oil film around the shaft exit points, replace the seals promptly. Running with leaking seals leads to low oil levels and accelerated gear wear. CMN supplies exact-fit flail mower gearbox oil seal kits for the CMN-9.311-JCG, making preventive replacement straightforward during scheduled maintenance windows.

Q: Is the CMN-9.311-JCG suitable for a 3 point hitch flail mower?
A: Yes. The majority of flail mowers in the 30 to 50 HP tractor class are three-point hitch mounted, and the CMN-9.311-JCG is specifically designed for this configuration. The 1 3/8" six-spline input shaft connects through a standard PTO driveline shaft to the tractor's rear PTO. The gearbox housing mounts directly to the implement frame above the flail drum. For offset or front-mounted flail mower designs, verify the mounting orientation and driveline routing before ordering, as these configurations may have different spatial requirements.

Q: What is the expected service life of this flail mower gearbox?
A: With proper maintenance, including regular oil changes, correct oil type and level, and clean seals and breather, the CMN-9.311-JCG typically delivers 2,000 to 4,000+ hours of operation before a major rebuild is required. Actual life depends on operating conditions: continuous heavy brush work at full 50 HP load will wear the gear train faster than light grass mowing at 30 HP. Following the break-in oil change at 50 hours and the regular 200-hour service interval is the single most effective way to maximize gearbox service life.

Q: Can I use this gearbox on a 1000 RPM PTO tractor?
A: The CMN-9.311-JCG is rated for 540 RPM PTO input only. Running the gearbox at 1,000 RPM would double the input speed and dramatically increase the centrifugal and inertia forces on the gear train, bearings, and seals beyond their design limits. If your tractor has a 1,000 RPM PTO, you will need either a tractor with a 540 RPM PTO option or a PTO speed reducer adapter between the tractor and the driveline. Contact CMN Transmission for guidance on selecting the correct gearbox for your tractor's PTO speed.

Q: Where can I buy replacement flail mower gearbox bearings and seals?
A: CMN Transmission supplies genuine replacement parts for all CMN gearbox models, including bearing kits, seal kits, gear sets, gaskets, and complete rebuild kits for the CMN-9.311-JCG. Parts are available direct from CMN or through authorized distributors in the United States, Europe, Australia, South America, and Asia. Standard bearings and seals also cross-reference to common industrial bearing brands (such as SKF, NTN, or Timken equivalents), so they can be sourced locally if needed. Contact CMN with your gearbox model and serial number for exact part numbers.

Q: How much flail mower gearbox oil does the CMN-9.311-JCG hold?
A: The gearbox oil capacity is approximately 0.6 to 0.8 liters, depending on the mounting angle. The correct fill method is to add EP 90 gear oil through the fill plug until oil just reaches the inspection plug opening. Do not measure by volume alone, as the internal oil distribution changes with the gearbox orientation on the implement. Always check the level with the gearbox in its installed operating position to get an accurate reading. Overfilling causes seal pressure issues, while underfilling starves the gear mesh and leads to premature wear.

Q: Does CMN Transmission offer custom flail mower gearbox ratios or configurations?
A: Yes. In addition to the standard 1:3 ratio CMN-9.311-JCG, CMN Transmission manufactures flail mower gearboxes in a range of ratios and power ratings to suit different applications. Custom configurations, including special shaft diameters, non-standard mounting patterns, and alternative input spline sizes, are available for OEM customers and volume buyers. Contact our engineering team with your specifications and required annual quantity for a quotation and lead time estimate. CMN supports custom production based on customer drawings and specifications.

Q: How do I determine the correct output shaft length for my flail mower?
A: Measure the distance from the gearbox mounting face on your implement frame to the center of the flail drum bearing or coupling. This distance corresponds to the "L1" dimension in the CMN-9.311-JCG specification table, which ranges from 220 mm (-1 variant) to 1,345 mm (-14 variant). Select the variant whose L1 value most closely matches your measurement. If you are unsure, remove the existing gearbox and measure the total output shaft length from the housing face to the shaft end; this corresponds to the "L" dimension in the table. CMN technical support can assist with selection if you provide your mower model or shaft measurements.

Flail Mower Gearbox

Customer Reviews

Mike Henderson, Cattle Rancher, United States
"We run a 400-acre beef cattle operation in central Texas and needed a gearbox to replace the worn-out unit on our 1.5-meter Desvoys flail mower. Ordered the CMN-9.311-JCG with the -6 output shaft (780 mm) and it bolted right on without any frame modification. The spline fit was perfect, no slop at all. Put about 180 hours on it through summer and fall, mowing Bermuda grass and mesquite brush along fencelines. Changed the oil at 50 hours like the manual says. Drained oil came out clean with no metal shavings. Very satisfied with the value compared to what the dealer wanted for the OEM part."

Dave Faulkner, Road Maintenance Supervisor, Canada
"Bought two CMN-9.311-JCG gearboxes for our municipal road maintenance fleet in Ontario. We mow highway shoulders and ditch banks from May through October, so the gearboxes take a beating from gravel and debris. After a full season, both units are still running smooth with no leaks. The 1:3 ratio gives us good drum speed for the mixed grass and goldenrod we deal with. Shipping from Korea took about two weeks to arrive, which was faster than I expected. Customer service answered my technical questions about output shaft length within a few hours."

Thomas Weigl, Agricultural Machinery Dealer, Germany
"We service agricultural equipment across Bavaria and started stocking CMN gearboxes last year as aftermarket alternatives for several European flail mower brands. The CMN-9.311-JCG fits well on most Italian and German compact flail mowers in the 30 to 50 HP range. Quality of the casting and gear finish is good. One minor point: the oil fill and drain plugs use metric threads, which is correct for European machines but different from some American-made gearboxes. We have sold about 15 units so far with no warranty returns. Good product for the price."

Carlos Reinoso, Vineyard Manager, Argentina
"I manage 60 hectares of Cabernet Sauvignon vineyards in Mendoza and use a narrow offset flail mower for under-vine work. The previous gearbox lasted three seasons before the seals failed. Replaced it with the CMN-9.311-JCG (-2 variant, 500 mm shaft) and it has been running perfectly for 14 months now, roughly 250 hours. The sealing is noticeably better. No oil spots on the ground after parking overnight. The gearbox is light enough that it does not overload the offset arm, which was a concern with some heavier alternatives I looked at."

Jean-Marc Delacroix, Landscape Contractor, France
"We operate a landscaping and grounds maintenance company in the Loire Valley and maintain parks, cemeteries, and sports field surrounds for several municipalities. Switched to CMN gearboxes on three of our flail mowers after the original Italian gearboxes needed rebuilding at 600 hours. The CMN-9.311-JCG has now done over 400 hours on our busiest machine with no problems. The gear noise level is low, which matters when we are working next to residential areas in the early morning. I ordered spare seal kits just in case, but have not needed them yet."

Marco Ferretti, Olive Farm Owner, Italy
"Needed a flail mower gearbox replacement for our Nobili BLL mulcher at the olive grove. The local dealer quoted a long lead time and high price for the OEM unit. Found the CMN-9.311-JCG online, confirmed the dimensions matched with their sales team, and received it in about 10 days to Sicily. Installation took less than an hour. The 1:3 ratio is exactly what the mulcher requires for our heavy pruning residue work. After 120 hours the gearbox runs cool and quiet. Very good experience overall."

Ricardo Almeida, Sugar Cane Farm, Brazil
"We run sugar cane operations in Sao Paulo state and use flail mowers to chop cane trash after harvest. Our 45 HP Kubota tractor pushes the gearbox close to its limit on thick cane stubble, but the CMN-9.311-JCG handles it without overheating. We did have to file a small amount off one mounting hole to match our frame, which cost about 20 minutes of work. The gearbox itself is solid. We have ordered three more units for our other machines. Delivery to Brazil was about three weeks including customs clearance."

Grant McPherson, Sheep Farmer, Australia
"I bought the CMN-9.311-JCG as a spare for my sheep farm in New South Wales. We get heavy summer grass and need the flail mower running every week from October through March. Installed it on my Fieldmaster 1800 mower; the shaft length (-8 variant, 950 mm) was a perfect match. The cast iron housing feels heavier-duty than the aluminium gearbox it replaced. First oil change at 50 hours looked clean. I keep a second gearbox on the shelf so I am never waiting on parts during peak season. Good value for a workshop spare."

Alejandro Ruiz, Spare Parts Distributor, Spain
"Our company distributes agricultural spare parts across southern Spain and Portugal. We added the CMN gearbox range to our catalog about eight months ago after testing the 9.311-JCG on our own workshop mower for 200 hours. Build quality is consistent across the batches we have received, and the packaging protects the gearbox well during shipping. Our customers in Andalusia and Alentejo are mostly olive and almond growers who use compact flail mowers. The price-to-quality ratio is very competitive against the European-branded alternatives. Response time from the CMN sales team is typically same day."

Additional information

Edited by

Yjx