Introduction to GB/T 9145-2003 Standard
This standard specifies limit dimensions for general-purpose metric screw threads of medium accuracy in the preferred series, ensuring interchangeability and performance in mechanical assemblies. It covers coarse and fine pitch threads for internal and external applications, with tolerances applied before plating for thin coatings.
Объем
GB/T 9145-2003 defines the limit dimensions for metric screw threads with medium tolerance precision and preferred series, applicable to general engineering purposes. It ensures that thread profiles do not exceed the maximum material condition defined by basic profiles and tolerance positions. This is crucial for fasteners in industries requiring reliable mating without interference, especially post-plating.
- Applies to threads before thin coatings like electroplating.
- Post-plating, profiles must stay within H or h positions.
- Focuses on medium engagement lengths for balanced strength and manufacturability.
General Limit Dimensions
No point on the thread root profile shall exceed the maximum entity profile per basic form and tolerance. For plated threads, actual contours post-plating must not surpass H/h positions. This prevents over-tightening or failure in assemblies. Note: Tolerances suit thin platings; heavier coatings require adjustments.
Coarse Pitch Internal Threads
For medium precision, engagement length is medium. Tolerance zones: 5H for d ≤ 1.4 mm; 6H for d > 1.4 mm. Limits for pitch diameter D2 and minor diameter D1 ensure proper fit with external threads.
| Нить | Engagement Length | Диаметр шага D2 | Малый диаметр D1 | |||
|---|---|---|---|---|---|---|
| > | ≤ | макс | мин | макс | мин | |
| М1 | 0.6 | 1.7 | 0.894 | 0.838 | 0.785 | 0.729 |
| M1.2 | 0.6 | 1.7 | 1.094 | 1.038 | 0.985 | 0.929 |
| M1.4 | 0.7 | 2 | 1.265 | 1.205 | 1.142 | 1.075 |
| М1.6 | 0.8 | 2.6 | 1.458 | 1.373 | 1.321 | 1.221 |
| M1.8 | 0.8 | 2.6 | 1.658 | 1.573 | 1.521 | 1.421 |
| М2 | 1 | 3 | 1.83 | 1.74 | 1.679 | 1.567 |
| М2.5 | 1.3 | 3.8 | 2.303 | 2.208 | 2.138 | 2.013 |
| М3 | 1.5 | 4.5 | 2.775 | 2.675 | 2.599 | 2.459 |
| M3.5 | 1.7 | 5 | 3.222 | 3.11 | 3.01 | 2.85 |
| М4 | 2 | 6 | 3.663 | 3.545 | 3.422 | 3.242 |
| М5 | 2.5 | 7.5 | 4.605 | 4.48 | 4.334 | 4.134 |
| М6 | 3 | 9 | 5.5 | 5.35 | 5.153 | 4.917 |
| М7 | 3 | 9 | 6.5 | 6.35 | 6.153 | 5.917 |
| М8 | 4 | 12 | 7.348 | 7.188 | 6.912 | 6.647 |
| М10 | 5 | 15 | 9.206 | 9.026 | 8.676 | 8.376 |
| М12 | 6 | 18 | 11.063 | 10.863 | 10.441 | 10.106 |
| М14 | 8 | 24 | 12.913 | 12.701 | 12.21 | 11.835 |
| М16 | 8 | 24 | 14.913 | 14.701 | 14.21 | 13.835 |
| М18 | 10 | 30 | 16.6 | 16.376 | 15.744 | 15.294 |
| М20 | 10 | 30 | 18.6 | 18.376 | 17.744 | 17.294 |
| М22 | 10 | 30 | 20.6 | 20.376 | 19.744 | 19.294 |
| М24 | 12 | 36 | 22.316 | 22.051 | 21.252 | 20.752 |
| М27 | 12 | 36 | 25.316 | 25.051 | 24.252 | 23.752 |
| М30 | 15 | 45 | 28.007 | 27.727 | 26.771 | 26.211 |
| М33 | 15 | 45 | 31.007 | 30.727 | 29.771 | 29.211 |
| М36 | 18 | 53 | 33.702 | 33.402 | 32.27 | 31.67 |
| М39 | 18 | 53 | 36.702 | 36.402 | 35.27 | 34.67 |
| М42 | 21 | 63 | 39.392 | 39.077 | 37.799 | 37.129 |
| М45 | 21 | 63 | 42.392 | 42.077 | 40.799 | 40.129 |
| М48 | 24 | 71 | 45.087 | 44.752 | 43.297 | 42.587 |
| М52 | 24 | 71 | 49.087 | 48.752 | 46.681 | 45.971 |
| М56 | 28 | 85 | 52.783 | 52.428 | 50.796 | 50.046 |
| М60 | 28 | 85 | 56.783 | 56.428 | 54.796 | 54.046 |
| М64 | 32 | 95 | 60.478 | 60.103 | 58.305 | 57.505 |
These dimensions provide guidance for nut manufacturing, ensuring compatibility with bolts under medium load conditions.
Coarse Pitch External Threads
Medium precision, medium engagement. Tolerance zones: 6h for d ≤ 1.4 mm; 6g for d > 1.4 mm. Limits for major diameter d and pitch diameter d2, with min root radius per GB/T 197-2003.
| Нить | Engagement Length | Major Diameter d | Pitch Diameter d2 | Min Root Radiusа | |||
|---|---|---|---|---|---|---|---|
| > | ≤ | макс | мин | макс | мин | мин | |
| М1 | 0.6 | 1.7 | 1 | 0.933 | 0.838 | 0.785 | 0.031 |
| M1.2 | 0.6 | 1.7 | 1.2 | 1.133 | 1.038 | 0.985 | 0.031 |
| M1.4 | 0.7 | 2 | 1.4 | 1.325 | 1.205 | 1.149 | 0.038 |
| М1.6 | 0.8 | 2.6 | 1.581 | 1.496 | 1.354 | 1.291 | 0.044 |
| M1.8 | 0.8 | 2.6 | 1.781 | 1.696 | 1.554 | 1.491 | 0.044 |
| М2 | 1 | 3 | 1.981 | 1.886 | 1.721 | 1.654 | 0.05 |
| М2.5 | 1.3 | 3.8 | 2.48 | 2.38 | 2.188 | 2.117 | 0.056 |
| М3 | 1.5 | 4.5 | 2.98 | 2.874 | 2.655 | 2.58 | 0.063 |
| M3.5 | 1.7 | 5 | 3.479 | 3.354 | 3.089 | 3.004 | 0.075 |
| М4 | 2 | 6 | 3.978 | 3.838 | 3.523 | 3.433 | 0.088 |
| М5 | 2.5 | 7.5 | 4.976 | 4.826 | 4.456 | 4.361 | 0.1 |
| М6 | 3 | 9 | 5.974 | 5.794 | 5.324 | 5.212 | 0.125 |
| М7 | 3 | 9 | 6.974 | 6.794 | 6.324 | 6.212 | 0.125 |
| М8 | 4 | 12 | 7.972 | 7.76 | 7.16 | 7.042 | 0.156 |
| М10 | 5 | 15 | 9.968 | 9.732 | 8.994 | 8.862 | 0.188 |
| М12 | 6 | 18 | 11.966 | 11.701 | 10.829 | 10.679 | 0.219 |
| М14 | 8 | 24 | 13.962 | 13.682 | 12.663 | 12.503 | 0.25 |
| М16 | 8 | 24 | 15.962 | 15.682 | 14.663 | 14.503 | 0.25 |
| М18 | 10 | 30 | 17.958 | 17.623 | 16.334 | 16.164 | 0.313 |
| М20 | 10 | 30 | 19.958 | 19.623 | 18.334 | 18.164 | 0.313 |
| М22 | 10 | 30 | 21.958 | 21.623 | 20.334 | 20.164 | 0.313 |
| М24 | 12 | 36 | 23.952 | 23.577 | 22.003 | 21.803 | 0.375 |
| М27 | 12 | 36 | 26.952 | 26.577 | 25.003 | 24.803 | 0.375 |
| М30 | 15 | 45 | 29.947 | 29.522 | 27.674 | 27.462 | 0.438 |
| М33 | 15 | 45 | 32.947 | 32.522 | 30.674 | 30.462 | 0.438 |
| М36 | 18 | 53 | 35.94 | 35.465 | 33.342 | 33.118 | 0.5 |
| М39 | 18 | 53 | 38.94 | 38.465 | 36.342 | 36.118 | 0.5 |
| М42 | 21 | 63 | 41.937 | 41.437 | 39.014 | 38.778 | 0.563 |
| М45 | 21 | 63 | 44.937 | 44.437 | 42.014 | 41.778 | 0.563 |
| М48 | 24 | 71 | 47.929 | 47.399 | 44.681 | 44.431 | 0.625 |
| М52 | 24 | 71 | 51.929 | 51.399 | 48.681 | 48.431 | 0.625 |
| М56 | 28 | 85 | 55.925 | 55.365 | 52.353 | 52.088 | 0.688 |
| М60 | 28 | 85 | 59.925 | 59.365 | 56.353 | 56.088 | 0.688 |
| М64 | 32 | 95 | 63.92 | 63.32 | 60.023 | 59.743 | 0.75 |
а See GB/T 197-2003 Chapter 7 and Table 9 for root radius details. These ensure stress distribution and fatigue resistance.
Fine Pitch Internal Threads
Medium precision, medium engagement, 6H tolerance zone. Fine pitches offer better vibration resistance and adjustment precision.
| Нить | Engagement Length | Диаметр шага D2 | Малый диаметр D1 | |||
|---|---|---|---|---|---|---|
| > | ≤ | макс | мин | макс | мин | |
| M8×1 | 3 | 9 | 7.5 | 7.35 | 7.153 | 6.917 |
| M10×1 | 4 | 12 | 9.5 | 9.35 | 9.153 | 8.917 |
| M10×1.25 | 4 | 12 | 9.348 | 9.188 | 8.912 | 8.647 |
| M12×1.25 | 4.5 | 13 | 11.368 | 11.188 | 10.912 | 10.647 |
| M12×1.5 | 4.5 | 13 | 11.216 | 11.026 | 10.676 | 10.376 |
| M14×1.5 | 5.6 | 16 | 13.216 | 13.026 | 12.676 | 12.376 |
| M16×1.5 | 5.6 | 16 | 15.216 | 15.026 | 14.676 | 14.376 |
| M18×1.5 | 5.6 | 16 | 17.216 | 17.026 | 16.676 | 16.376 |
| M18×2 | 5.6 | 16 | 16.913 | 16.701 | 16.21 | 15.835 |
| M20×1.5 | 5.6 | 16 | 19.216 | 19.026 | 18.676 | 18.376 |
| M20×2 | 5.6 | 16 | 18.913 | 18.701 | 18.21 | 17.835 |
| M22×1.5 | 5.6 | 16 | 21.216 | 21.026 | 20.676 | 20.376 |
| M22×2 | 5.6 | 16 | 20.913 | 20.701 | 20.21 | 19.835 |
| M24×2 | 8.5 | 25 | 22.925 | 22.701 | 22.21 | 21.835 |
| M27×2 | 8.5 | 25 | 25.925 | 25.701 | 25.21 | 24.835 |
| M30×2 | 8.5 | 25 | 28.925 | 28.701 | 28.21 | 27.835 |
| M33×2 | 8.5 | 25 | 31.925 | 31.701 | 31.21 | 30.835 |
| M36×3 | 12 | 36 | 34.316 | 34.051 | 33.252 | 32.752 |
| M39×3 | 12 | 36 | 37.316 | 37.051 | 36.252 | 35.752 |
| M42×3 | 12 | 36 | 40.316 | 40.051 | 39.252 | 38.752 |
| М45×3 | 12 | 36 | 43.316 | 43.051 | 42.252 | 41.752 |
| M48×3 | 15 | 45 | 46.331 | 46.051 | 45.252 | 44.752 |
| М52×4 | 19 | 56 | 49.717 | 49.402 | 48.27 | 47.67 |
| М56×4 | 19 | 56 | 53.717 | 53.402 | 52.27 | 51.67 |
| М60×4 | 19 | 56 | 57.717 | 57.402 | 56.27 | 55.67 |
| М64×4 | 19 | 56 | 61.717 | 61.402 | 60.27 | 59.67 |
These values support finer load distribution in high-vibration environments.
Fine Pitch External Threads
Medium precision, medium engagement, 6g tolerance zone. Provides stronger core sections for enhanced shear strength.
| Нить | Engagement Length | Major Diameter d | Pitch Diameter d2 | Min Root Radiusа | |||
|---|---|---|---|---|---|---|---|
| > | ≤ | макс | мин | макс | мин | мин | |
| M8×1 | 3 | 9 | 7.974 | 7.794 | 7.324 | 7.212 | 0.125 |
| M10×1 | 4 | 12 | 9.974 | 9.794 | 9.324 | 9.212 | 0.125 |
| M10×1.25 | 4 | 12 | 9.972 | 9.76 | 9.16 | 9.042 | 0.156 |
| M12×1.25 | 4.5 | 13 | 11.972 | 11.76 | 11.16 | 11.028 | 0.156 |
| M12×1.5 | 4.5 | 13 | 11.968 | 11.732 | 10.994 | 10.854 | 0.188 |
| M14×1.5 | 5.6 | 16 | 13.968 | 13.732 | 12.994 | 12.854 | 0.188 |
| M16×1.5 | 5.6 | 16 | 15.968 | 15.732 | 14.994 | 14.854 | 0.188 |
| M18×1.5 | 5.6 | 16 | 17.968 | 17.732 | 16.994 | 16.854 | 0.188 |
| M18×2 | 5.6 | 16 | 17.962 | 17.682 | 16.663 | 16.503 | 0.25 |
| M20×1.5 | 5.6 | 16 | 19.968 | 19.732 | 18.994 | 18.854 | 0.188 |
| M20×2 | 5.6 | 16 | 19.962 | 19.682 | 18.663 | 18.503 | 0.25 |
| M22×1.5 | 5.6 | 16 | 21.968 | 21.732 | 20.994 | 20.854 | 0.188 |
| M22×2 | 5.6 | 16 | 21.962 | 21.682 | 20.663 | 20.503 | 0.25 |
| M24×2 | 8.5 | 25 | 23.962 | 23.682 | 22.663 | 22.493 | 0.25 |
| M27×2 | 8.5 | 25 | 26.962 | 26.682 | 25.663 | 25.493 | 0.25 |
| M30×2 | 8.5 | 25 | 29.962 | 29.682 | 28.663 | 28.493 | 0.25 |
| M33×2 | 8.5 | 25 | 32.962 | 32.682 | 31.663 | 31.493 | 0.25 |
| M36×3 | 12 | 36 | 35.952 | 35.577 | 34.003 | 33.803 | 0.375 |
| M39×3 | 12 | 36 | 38.952 | 38.577 | 37.003 | 36.803 | 0.375 |
| M42×3 | 12 | 36 | 41.952 | 41.577 | 40.003 | 39.803 | 0.375 |
| М45×3 | 12 | 36 | 44.952 | 44.577 | 43.003 | 42.803 | 0.375 |
| M48×3 | 15 | 45 | 47.952 | 47.577 | 46.003 | 45.791 | 0.375 |
| М52×4 | 19 | 56 | 51.94 | 51.465 | 49.342 | 49.106 | 0.5 |
| М56×4 | 19 | 56 | 55.94 | 55.465 | 53.342 | 53.106 | 0.5 |
| М60×4 | 19 | 56 | 59.94 | 59.465 | 57.342 | 57.106 | 0.5 |
| М64×4 | 19 | 56 | 63.94 | 63.465 | 61.342 | 61.106 | 0.5 |
а See GB/T 197-2003 for root radius specifications, critical for avoiding stress concentrations.
Часто задаваемые вопросы
What tolerance zones apply to coarse internal threads?
5H for diameters ≤1.4 mm; 6H for >1.4 mm, ensuring medium precision fit.
How does plating affect thread dimensions?
Tolerances are pre-plating; post-plating profiles must not exceed H/h positions for thin coatings to maintain assembly.
Why use fine pitch threads?
They provide better vibration resistance and finer adjustments, with stronger cores per limits in tables 3 and 4.
What is medium engagement length?
It balances thread strength and cost; use table values for specific ranges to avoid over- or under-engagement.
How to interpret root radius?
Min values per GB/T 197-2003 reduce stress; essential for fatigue-prone applications.
Are these limits for all materials?
Yes, but adjust for special platings; consult standard for heavy coatings requiring oversized threads.
