Article Outline
This guide provides a structured overview of fastener basics, optimized for engineers and professionals seeking reliable knowledge:
- Introduction: Importance and scope of fasteners.
- Measurement Units: Metric and imperial systems.
- Threads: Types, fits, and markings.
- Geometric Parameters: Key dimensions for mechanical threads.
- Self-Tapping and Drilling Threads: Specific parameters.
- Thread Angles and Tails: Angles for various fasteners.
- FAQ: Practical answers to common questions.
Introduction
Fasteners are essential components in mechanical engineering, used for joining parts securely. This guide covers fundamental concepts, including measurement systems, thread classifications, and geometric parameters, ensuring compliance with industry standards like GB/T and ISO. Understanding these basics helps in selecting appropriate fasteners for applications, preventing failures, and optimizing designs for strength and durability.
Professionals should prioritize accurate measurements and thread fits to achieve reliable connections. This knowledge is vital in industries such as automotive, construction, and machinery, where improper fastening can lead to safety issues.
Measurement Units
Global length measurements use two primary systems: metric, prevalent in Europe, Asia including China and Japan, with units like meters (m), centimeters (cm), and millimeters (mm); and imperial, common in the US and UK, based on inches.
Guidance for conversion and application:
- Metric system uses base-10: 1 m = 100 cm = 1000 mm.
- Imperial system uses base-8: 1 inch = 8 divisions, 1 inch = 25.4 mm (e.g., 3/8 inch × 25.4 = 9.52 mm).
- For sizes below 1/4 inch, use gauge numbers like 4#, 5#, 6#, 7#, 8#, 10#, 12# to denote nominal diameters.
- Select system based on regional standards to ensure compatibility in international projects.
Threads
Threads are uniform helical ridges on cylindrical surfaces, classified by structure and use into three main types: general-purpose for fastening, transmission for motion transfer, and sealing for leak-proof connections.
Thread Types
- General threads: Triangular profile, divided into coarse and fine pitch; fine offers higher strength.
- Transmission threads: Trapezoidal, rectangular, sawtooth, or triangular profiles.
- Sealing threads: Pipe threads, tapered threads, or tapered pipe threads.
Thread Fits
Thread fits determine tightness between mating threads, specified by deviations and tolerances.
For unified inch threads:
- External: 1A, 2A, 3A (tighter with higher number).
- Internal: 1B, 2B, 3B.
- All are clearance fits; higher grades have smaller tolerances.
- 1A/1B for loose fits; 2A/2B for general use; 3A/3B for critical safety designs.
For metric threads:
- External: 4h, 6h, 6g.
- Internal: 5H, 6H, 7H.
- Japanese grades: I, II, III (typically II).
- Recommended fits: 6H/6g for refined fasteners.
Thread Markings
Markings indicate thread specifications, ensuring correct identification and use.
Geometric Parameters
Key parameters define thread performance and compatibility in mechanical applications.
- Major diameter (D, d): Imaginary cylinder at crests or roots.
- Pitch diameter (D2, d2): Calculated as D(d) – 2 × (3H/8), where H is original triangle height (0.866P for 60°; 0.960P for 55°).
- Minor diameter (D1, d1): Imaginary cylinder at roots or crests.
- Pitch (P): Axial distance between adjacent threads; imperial uses threads per inch.
- Flank angle (α/2): Half the thread angle (30° for 60° profile; 27.5° for 55°).
- Engagement length: Axial overlap of mated threads.
Pitch and Threads per Inch
| Metric Spec | Pitch (mm) | Imperial Spec | Nominal Dia (mm) | Threads per Inch | ||||
|---|---|---|---|---|---|---|---|---|
| Coarse | Fine | Extra Fine | Coarse | Fine | Whitworth | |||
| เอ็ม3 | 0.5 | 0.35 | – | 4# | 2.9 | 40 | 48 | – |
| เอ็ม4 | 0.7 | 0.5 | – | 6# | 3.5 | 32 | 40 | – |
| เอ็ม5 | 0.8 | 0.5 | – | 8# | 4.2 | 32 | 36 | – |
| เอ็ม6 | 1 | 0.75 | – | 10# | 4.8 | 24 | 32 | – |
| เอ็ม7 | 1 | 0.75 | – | 12# | 5.5 | 24 | 28 | – |
| เอ็ม8 | 1.25 | 1 | 0.75 | 1/4 | 6.35 | 20 | 28 | 20 |
| เอ็ม10 | 1.5 | 1.25 | 1 | 5/16 | 7.94 | 18 | 24 | 18 |
| เอ็ม12 | 1.75 | 1.5 | 1.25 | 3/8 | 9.53 | 16 | 24 | 16 |
| เอ็ม14 | 2 | 1.5 | 1 | 7/16 | 11.11 | 14 | 20 | 14 |
| เอ็ม16 | 2 | 1.5 | 1 | 1/2 | 12.7 | 13 | 20 | 12 |
| เอ็ม18 | 2.5 | 2 | 1.5 | 9/16 | 14.29 | 12 | 18 | 12 |
| เอ็ม20 | 2.5 | 2 | 1.5 | 5/8 | 15.86 | 11 | 18 | 11 |
| เอ็ม22 | 2.5 | 2 | 1.5 | 3/4 | 19.05 | 10 | 16 | 10 |
| เอ็ม24 | 3 | 2 | 1.5 | 7/8 | 22.23 | 9 | 14 | 9 |
| เอ็ม27 | 3 | 2 | 1.5 | 1 | 25.4 | 8 | 12 | 8 |
| เอ็ม30 | 3.5 | 3 | 2 | – | – | – | – | – |
Self-Tapping and Drilling Threads
Self-tapping and drilling threads create their own holes, with parameters tailored for efficiency.
- Major diameter (d1): Imaginary cylinder at crests.
- Minor diameter (d2): Imaginary cylinder at roots.
- Pitch (p): Axial distance or threads per inch.
Metric Self-Tapping Pitch (mm)
| Spec | ST1.5 | ST1.9 | ST2.2 | ST2.6 | ST2.9 | ST3.3 | ST3.5 | ST3.9 | ST4.2 | ST4.8 | ST5.5 | ST6.3 | ST8.0 | ST9.5 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Pitch | 0.5 | 0.6 | 0.8 | 0.9 | 1.1 | 1.3 | 1.3 | 1.3 | 1.4 | 1.6 | 1.8 | 1.8 | 2.1 | 2.1 |
Imperial Self-Tapping Threads per Inch
| Spec | 4# | 5# | 6# | 7# | 8# | 10# | 12# | 14# |
|---|---|---|---|---|---|---|---|---|
| AB Type | 24 | 20 | 20 | 19 | 18 | 16 | 14 | 14 |
| A Type | 24 | 20 | 18 | 16 | 15 | 12 | 11 | 10 |
Japanese Drywall Screw Threads
| Spec | Coarse | Fine | ||
|---|---|---|---|---|
| Threads | Pitch (mm) | Threads | Pitch (mm) | |
| 6# | 9 | 2.82 | 18 | 1.41 |
| 7# | 9 | 2.82 | 16 | 1.59 |
| 8# | 9 | 2.82 | 15 | 1.69 |
| 10# | 8 | 3.18 | 12 | 2.11 |
Machine Screw Pitch/Threads
| Metric Spec | Pitch (mm) | Imperial Spec | Threads per Inch | ||
|---|---|---|---|---|---|
| Coarse | Fine | Coarse | Fine | ||
| ม.2.5 | 0.45 | 0.35 | 4# | 40 | 48 |
| เอ็ม3 | 0.5 | 0.35 | 5# | 40 | 44 |
| ม3.5 | 0.6 | 0.35 | 6# | 32 | 40 |
| เอ็ม4 | 0.7 | 0.5 | 8# | 32 | 36 |
| เอ็ม5 | 0.8 | 0.5 | 10# | 24 | 32 |
| เอ็ม6 | 1 | 0.75 | 12# | 24 | 28 |
| เอ็ม8 | 1.25 | 1 | 1/4 | 20 | 28 |
For drilling screws, CSD (machine) and BSD (AB type) pitches reference machine and self-tapping tables respectively.
Thread Angles and Tails
Angles affect cutting efficiency and strength in specialized fasteners.
- Self-tapping: Flank 60°, tail 45° ±5°.
- Drywall: Flank 60° (or custom 45° ±5°), tail 25° ±3°.
- Chipboard: Flank 40° ±3°, tail 25° ±3° or 34° ±3° (custom).
- Drilling: Flank 60° ±5°, tail varies by spec and die.
Select angles based on material and application for optimal penetration and hold.
คำถามที่พบบ่อย
- What is the difference between coarse and fine threads?
Coarse threads have larger pitch for quicker assembly and better resistance to stripping; fine threads provide higher strength and vibration resistance in precision applications. - How to convert between metric and imperial measurements?
Use 1 inch = 25.4 mm; for example, multiply imperial fractions by 25.4 to get mm equivalents, ensuring accuracy in mixed-system designs. - When to use self-tapping vs. machine threads?
Self-tapping for creating holes in soft materials like wood or plastic; machine for pre-threaded holes requiring higher precision and load-bearing. - What does thread fit grade indicate?
Higher grades (e.g., 3A/3B) mean tighter tolerances for critical fits; lower (1A/1B) for loose, cost-effective assemblies. - How does plating affect thread tolerances?
Plating adds thickness; use pre-plating tolerances like 6g for 6h requirements to accommodate 6-9 μm layers without interference. - Why is pitch important in fastener selection?
Pitch affects engagement strength and speed; smaller pitch increases holding power but requires more turns for installation.
