{"id":5757,"date":"2025-12-24T05:18:00","date_gmt":"2025-12-24T05:18:00","guid":{"rendered":"https:\/\/korea-transmission.com\/?p=5757"},"modified":"2025-12-24T05:18:19","modified_gmt":"2025-12-24T05:18:19","slug":"gb-t-9145-2003-thread-limit-dimensions","status":"publish","type":"post","link":"https:\/\/korea-transmission.com\/ms\/blog\/gb-t-9145-2003-thread-limit-dimensions\/","title":{"rendered":"Dimensi Had Benang GB\/T 9145-2003"},"content":{"rendered":"

[et_pb_section admin_label=”section”]
\n\t\t\t[et_pb_row admin_label=”row”]
\n\t\t\t\t[et_pb_column type=”4_4″][et_pb_text admin_label=”Text”]<\/p>\n

\n

Pengenalan kepada Piawaian GB\/T 9145-2003<\/h2>\n

Piawaian ini menentukan dimensi had untuk ulir skru metrik tujuan umum dengan ketepatan sederhana dalam siri pilihan, memastikan kebolehtukaran dan prestasi dalam pemasangan mekanikal. Ia merangkumi ulir pic kasar dan halus untuk aplikasi dalaman dan luaran, dengan toleransi yang dikenakan sebelum penyaduran untuk salutan nipis.<\/p>\n<\/div>\n

\n

Skop<\/h2>\n

GB\/T 9145-2003 mentakrifkan dimensi had untuk ulir skru metrik dengan ketepatan toleransi sederhana dan siri pilihan, yang terpakai untuk tujuan kejuruteraan am. Ia memastikan profil ulir tidak melebihi keadaan bahan maksimum yang ditakrifkan oleh profil asas dan kedudukan toleransi. Ini penting untuk pengikat dalam industri yang memerlukan pemadanan yang boleh dipercayai tanpa gangguan, terutamanya pasca-penyaduran.<\/p>\n

    \n
  • Digunakan pada benang sebelum salutan nipis seperti penyaduran elektrik.<\/li>\n
  • Selepas penyaduran, profil mesti kekal dalam kedudukan H atau h.<\/li>\n
  • Memberi tumpuan kepada panjang penglibatan sederhana untuk kekuatan dan kebolehkilangan yang seimbang.<\/li>\n<\/ul>\n<\/div>\n
    \n

    Dimensi Had Am<\/h2>\n

    Tiada titik pada profil akar benang yang boleh melebihi profil entiti maksimum mengikut bentuk dan toleransi asas. Bagi benang bersalut, kontur sebenar selepas penyaduran tidak boleh melebihi kedudukan H\/h. Ini menghalang pengetatan atau kegagalan yang berlebihan dalam pemasangan. Nota: Toleransi sesuai dengan penyaduran nipis; salutan yang lebih berat memerlukan pelarasan.<\/p>\n<\/div>\n

    \n

    Benang Dalaman Pitch Kasar<\/h2>\n

    Untuk ketepatan sederhana, panjang penglibatan adalah sederhana. Zon toleransi: 5H untuk d \u2264 1.4 mm; 6H untuk d > 1.4 mm. Had untuk diameter pic D2<\/sub> dan diameter kecil D1<\/sub> pastikan padanan yang betul dengan benang luaran.<\/p>\n

    \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
    Benang<\/th>\nTempoh Pertunangan<\/th>\nDiameter Pitch D2<\/sub><\/th>\nDiameter Kecil D1<\/sub><\/th>\n<\/tr>\n
    ><\/th>\n\u2264<\/th>\nmaksimum<\/th>\nmin<\/th>\nmaksimum<\/th>\nmin<\/th>\n<\/tr>\n<\/thead>\n
    M1<\/td>\n0.6<\/td>\n1.7<\/td>\n0.894<\/td>\n0.838<\/td>\n0.785<\/td>\n0.729<\/td>\n<\/tr>\n
    M1.2<\/td>\n0.6<\/td>\n1.7<\/td>\n1.094<\/td>\n1.038<\/td>\n0.985<\/td>\n0.929<\/td>\n<\/tr>\n
    M1.4<\/td>\n0.7<\/td>\n2<\/td>\n1.265<\/td>\n1.205<\/td>\n1.142<\/td>\n1.075<\/td>\n<\/tr>\n
    M1.6<\/td>\n0.8<\/td>\n2.6<\/td>\n1.458<\/td>\n1.373<\/td>\n1.321<\/td>\n1.221<\/td>\n<\/tr>\n
    M1.8<\/td>\n0.8<\/td>\n2.6<\/td>\n1.658<\/td>\n1.573<\/td>\n1.521<\/td>\n1.421<\/td>\n<\/tr>\n
    M2<\/td>\n1<\/td>\n3<\/td>\n1.83<\/td>\n1.74<\/td>\n1.679<\/td>\n1.567<\/td>\n<\/tr>\n
    M2.5<\/td>\n1.3<\/td>\n3.8<\/td>\n2.303<\/td>\n2.208<\/td>\n2.138<\/td>\n2.013<\/td>\n<\/tr>\n
    M3<\/td>\n1.5<\/td>\n4.5<\/td>\n2.775<\/td>\n2.675<\/td>\n2.599<\/td>\n2.459<\/td>\n<\/tr>\n
    M3.5<\/td>\n1.7<\/td>\n5<\/td>\n3.222<\/td>\n3.11<\/td>\n3.01<\/td>\n2.85<\/td>\n<\/tr>\n
    M4<\/td>\n2<\/td>\n6<\/td>\n3.663<\/td>\n3.545<\/td>\n3.422<\/td>\n3.242<\/td>\n<\/tr>\n
    M5<\/td>\n2.5<\/td>\n7.5<\/td>\n4.605<\/td>\n4.48<\/td>\n4.334<\/td>\n4.134<\/td>\n<\/tr>\n
    M6<\/td>\n3<\/td>\n9<\/td>\n5.5<\/td>\n5.35<\/td>\n5.153<\/td>\n4.917<\/td>\n<\/tr>\n
    M7<\/td>\n3<\/td>\n9<\/td>\n6.5<\/td>\n6.35<\/td>\n6.153<\/td>\n5.917<\/td>\n<\/tr>\n
    M8<\/td>\n4<\/td>\n12<\/td>\n7.348<\/td>\n7.188<\/td>\n6.912<\/td>\n6.647<\/td>\n<\/tr>\n
    M10<\/td>\n5<\/td>\n15<\/td>\n9.206<\/td>\n9.026<\/td>\n8.676<\/td>\n8.376<\/td>\n<\/tr>\n
    M12<\/td>\n6<\/td>\n18<\/td>\n11.063<\/td>\n10.863<\/td>\n10.441<\/td>\n10.106<\/td>\n<\/tr>\n
    M14<\/td>\n8<\/td>\n24<\/td>\n12.913<\/td>\n12.701<\/td>\n12.21<\/td>\n11.835<\/td>\n<\/tr>\n
    M16<\/td>\n8<\/td>\n24<\/td>\n14.913<\/td>\n14.701<\/td>\n14.21<\/td>\n13.835<\/td>\n<\/tr>\n
    M18<\/td>\n10<\/td>\n30<\/td>\n16.6<\/td>\n16.376<\/td>\n15.744<\/td>\n15.294<\/td>\n<\/tr>\n
    M20<\/td>\n10<\/td>\n30<\/td>\n18.6<\/td>\n18.376<\/td>\n17.744<\/td>\n17.294<\/td>\n<\/tr>\n
    M22<\/td>\n10<\/td>\n30<\/td>\n20.6<\/td>\n20.376<\/td>\n19.744<\/td>\n19.294<\/td>\n<\/tr>\n
    M24<\/td>\n12<\/td>\n36<\/td>\n22.316<\/td>\n22.051<\/td>\n21.252<\/td>\n20.752<\/td>\n<\/tr>\n
    M27<\/td>\n12<\/td>\n36<\/td>\n25.316<\/td>\n25.051<\/td>\n24.252<\/td>\n23.752<\/td>\n<\/tr>\n
    M30<\/td>\n15<\/td>\n45<\/td>\n28.007<\/td>\n27.727<\/td>\n26.771<\/td>\n26.211<\/td>\n<\/tr>\n
    M33<\/td>\n15<\/td>\n45<\/td>\n31.007<\/td>\n30.727<\/td>\n29.771<\/td>\n29.211<\/td>\n<\/tr>\n
    M36<\/td>\n18<\/td>\n53<\/td>\n33.702<\/td>\n33.402<\/td>\n32.27<\/td>\n31.67<\/td>\n<\/tr>\n
    M39<\/td>\n18<\/td>\n53<\/td>\n36.702<\/td>\n36.402<\/td>\n35.27<\/td>\n34.67<\/td>\n<\/tr>\n
    M42<\/td>\n21<\/td>\n63<\/td>\n39.392<\/td>\n39.077<\/td>\n37.799<\/td>\n37.129<\/td>\n<\/tr>\n
    M45<\/td>\n21<\/td>\n63<\/td>\n42.392<\/td>\n42.077<\/td>\n40.799<\/td>\n40.129<\/td>\n<\/tr>\n
    M48<\/td>\n24<\/td>\n71<\/td>\n45.087<\/td>\n44.752<\/td>\n43.297<\/td>\n42.587<\/td>\n<\/tr>\n
    M52<\/td>\n24<\/td>\n71<\/td>\n49.087<\/td>\n48.752<\/td>\n46.681<\/td>\n45.971<\/td>\n<\/tr>\n
    M56<\/td>\n28<\/td>\n85<\/td>\n52.783<\/td>\n52.428<\/td>\n50.796<\/td>\n50.046<\/td>\n<\/tr>\n
    M60<\/td>\n28<\/td>\n85<\/td>\n56.783<\/td>\n56.428<\/td>\n54.796<\/td>\n54.046<\/td>\n<\/tr>\n
    M64<\/td>\n32<\/td>\n95<\/td>\n60.478<\/td>\n60.103<\/td>\n58.305<\/td>\n57.505<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

    Dimensi ini memberikan panduan untuk pembuatan nat, memastikan keserasian dengan bolt di bawah keadaan beban sederhana.<\/p>\n<\/div>\n

    \n

    Benang Luaran Pitch Kasar<\/h2>\n

    Ketepatan sederhana, penglibatan sederhana. Zon toleransi: 6 jam untuk d \u2264 1.4 mm; 6 g untuk d > 1.4 mm. Had untuk diameter major d dan diameter pic d2<\/sub>, dengan jejari punca min setiap GB\/T 197-2003.<\/p>\n

    \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
    Benang<\/th>\nTempoh Pertunangan<\/th>\nDiameter Utama d<\/th>\nDiameter Pitch d2<\/sub><\/th>\nJejari Punca Minseorang<\/sup><\/th>\n<\/tr>\n
    ><\/th>\n\u2264<\/th>\nmaksimum<\/th>\nmin<\/th>\nmaksimum<\/th>\nmin<\/th>\nmin<\/th>\n<\/tr>\n<\/thead>\n
    M1<\/td>\n0.6<\/td>\n1.7<\/td>\n1<\/td>\n0.933<\/td>\n0.838<\/td>\n0.785<\/td>\n0.031<\/td>\n<\/tr>\n
    M1.2<\/td>\n0.6<\/td>\n1.7<\/td>\n1.2<\/td>\n1.133<\/td>\n1.038<\/td>\n0.985<\/td>\n0.031<\/td>\n<\/tr>\n
    M1.4<\/td>\n0.7<\/td>\n2<\/td>\n1.4<\/td>\n1.325<\/td>\n1.205<\/td>\n1.149<\/td>\n0.038<\/td>\n<\/tr>\n
    M1.6<\/td>\n0.8<\/td>\n2.6<\/td>\n1.581<\/td>\n1.496<\/td>\n1.354<\/td>\n1.291<\/td>\n0.044<\/td>\n<\/tr>\n
    M1.8<\/td>\n0.8<\/td>\n2.6<\/td>\n1.781<\/td>\n1.696<\/td>\n1.554<\/td>\n1.491<\/td>\n0.044<\/td>\n<\/tr>\n
    M2<\/td>\n1<\/td>\n3<\/td>\n1.981<\/td>\n1.886<\/td>\n1.721<\/td>\n1.654<\/td>\n0.05<\/td>\n<\/tr>\n
    M2.5<\/td>\n1.3<\/td>\n3.8<\/td>\n2.48<\/td>\n2.38<\/td>\n2.188<\/td>\n2.117<\/td>\n0.056<\/td>\n<\/tr>\n
    M3<\/td>\n1.5<\/td>\n4.5<\/td>\n2.98<\/td>\n2.874<\/td>\n2.655<\/td>\n2.58<\/td>\n0.063<\/td>\n<\/tr>\n
    M3.5<\/td>\n1.7<\/td>\n5<\/td>\n3.479<\/td>\n3.354<\/td>\n3.089<\/td>\n3.004<\/td>\n0.075<\/td>\n<\/tr>\n
    M4<\/td>\n2<\/td>\n6<\/td>\n3.978<\/td>\n3.838<\/td>\n3.523<\/td>\n3.433<\/td>\n0.088<\/td>\n<\/tr>\n
    M5<\/td>\n2.5<\/td>\n7.5<\/td>\n4.976<\/td>\n4.826<\/td>\n4.456<\/td>\n4.361<\/td>\n0.1<\/td>\n<\/tr>\n
    M6<\/td>\n3<\/td>\n9<\/td>\n5.974<\/td>\n5.794<\/td>\n5.324<\/td>\n5.212<\/td>\n0.125<\/td>\n<\/tr>\n
    M7<\/td>\n3<\/td>\n9<\/td>\n6.974<\/td>\n6.794<\/td>\n6.324<\/td>\n6.212<\/td>\n0.125<\/td>\n<\/tr>\n
    M8<\/td>\n4<\/td>\n12<\/td>\n7.972<\/td>\n7.76<\/td>\n7.16<\/td>\n7.042<\/td>\n0.156<\/td>\n<\/tr>\n
    M10<\/td>\n5<\/td>\n15<\/td>\n9.968<\/td>\n9.732<\/td>\n8.994<\/td>\n8.862<\/td>\n0.188<\/td>\n<\/tr>\n
    M12<\/td>\n6<\/td>\n18<\/td>\n11.966<\/td>\n11.701<\/td>\n10.829<\/td>\n10.679<\/td>\n0.219<\/td>\n<\/tr>\n
    M14<\/td>\n8<\/td>\n24<\/td>\n13.962<\/td>\n13.682<\/td>\n12.663<\/td>\n12.503<\/td>\n0.25<\/td>\n<\/tr>\n
    M16<\/td>\n8<\/td>\n24<\/td>\n15.962<\/td>\n15.682<\/td>\n14.663<\/td>\n14.503<\/td>\n0.25<\/td>\n<\/tr>\n
    M18<\/td>\n10<\/td>\n30<\/td>\n17.958<\/td>\n17.623<\/td>\n16.334<\/td>\n16.164<\/td>\n0.313<\/td>\n<\/tr>\n
    M20<\/td>\n10<\/td>\n30<\/td>\n19.958<\/td>\n19.623<\/td>\n18.334<\/td>\n18.164<\/td>\n0.313<\/td>\n<\/tr>\n
    M22<\/td>\n10<\/td>\n30<\/td>\n21.958<\/td>\n21.623<\/td>\n20.334<\/td>\n20.164<\/td>\n0.313<\/td>\n<\/tr>\n
    M24<\/td>\n12<\/td>\n36<\/td>\n23.952<\/td>\n23.577<\/td>\n22.003<\/td>\n21.803<\/td>\n0.375<\/td>\n<\/tr>\n
    M27<\/td>\n12<\/td>\n36<\/td>\n26.952<\/td>\n26.577<\/td>\n25.003<\/td>\n24.803<\/td>\n0.375<\/td>\n<\/tr>\n
    M30<\/td>\n15<\/td>\n45<\/td>\n29.947<\/td>\n29.522<\/td>\n27.674<\/td>\n27.462<\/td>\n0.438<\/td>\n<\/tr>\n
    M33<\/td>\n15<\/td>\n45<\/td>\n32.947<\/td>\n32.522<\/td>\n30.674<\/td>\n30.462<\/td>\n0.438<\/td>\n<\/tr>\n
    M36<\/td>\n18<\/td>\n53<\/td>\n35.94<\/td>\n35.465<\/td>\n33.342<\/td>\n33.118<\/td>\n0.5<\/td>\n<\/tr>\n
    M39<\/td>\n18<\/td>\n53<\/td>\n38.94<\/td>\n38.465<\/td>\n36.342<\/td>\n36.118<\/td>\n0.5<\/td>\n<\/tr>\n
    M42<\/td>\n21<\/td>\n63<\/td>\n41.937<\/td>\n41.437<\/td>\n39.014<\/td>\n38.778<\/td>\n0.563<\/td>\n<\/tr>\n
    M45<\/td>\n21<\/td>\n63<\/td>\n44.937<\/td>\n44.437<\/td>\n42.014<\/td>\n41.778<\/td>\n0.563<\/td>\n<\/tr>\n
    M48<\/td>\n24<\/td>\n71<\/td>\n47.929<\/td>\n47.399<\/td>\n44.681<\/td>\n44.431<\/td>\n0.625<\/td>\n<\/tr>\n
    M52<\/td>\n24<\/td>\n71<\/td>\n51.929<\/td>\n51.399<\/td>\n48.681<\/td>\n48.431<\/td>\n0.625<\/td>\n<\/tr>\n
    M56<\/td>\n28<\/td>\n85<\/td>\n55.925<\/td>\n55.365<\/td>\n52.353<\/td>\n52.088<\/td>\n0.688<\/td>\n<\/tr>\n
    M60<\/td>\n28<\/td>\n85<\/td>\n59.925<\/td>\n59.365<\/td>\n56.353<\/td>\n56.088<\/td>\n0.688<\/td>\n<\/tr>\n
    M64<\/td>\n32<\/td>\n95<\/td>\n63.92<\/td>\n63.32<\/td>\n60.023<\/td>\n59.743<\/td>\n0.75<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

    seorang<\/sup> Lihat GB\/T 197-2003 Bab 7 dan Jadual 9 untuk butiran jejari akar. Ini memastikan pengagihan tegasan dan rintangan keletihan.<\/p>\n<\/div>\n

    \n

    Benang Dalaman Pitch Halus<\/h2>\n

    Ketepatan sederhana, penglibatan sederhana, zon toleransi 6H. Padang halus menawarkan rintangan getaran dan ketepatan pelarasan yang lebih baik.<\/p>\n

    \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
    Benang<\/th>\nTempoh Pertunangan<\/th>\nDiameter Pitch D2<\/sub><\/th>\nDiameter Kecil D1<\/sub><\/th>\n<\/tr>\n
    ><\/th>\n\u2264<\/th>\nmaksimum<\/th>\nmin<\/th>\nmaksimum<\/th>\nmin<\/th>\n<\/tr>\n<\/thead>\n
    M8\u00d71<\/td>\n3<\/td>\n9<\/td>\n7.5<\/td>\n7.35<\/td>\n7.153<\/td>\n6.917<\/td>\n<\/tr>\n
    M10\u00d71<\/td>\n4<\/td>\n12<\/td>\n9.5<\/td>\n9.35<\/td>\n9.153<\/td>\n8.917<\/td>\n<\/tr>\n
    M10\u00d71.25<\/td>\n4<\/td>\n12<\/td>\n9.348<\/td>\n9.188<\/td>\n8.912<\/td>\n8.647<\/td>\n<\/tr>\n
    M12\u00d71.25<\/td>\n4.5<\/td>\n13<\/td>\n11.368<\/td>\n11.188<\/td>\n10.912<\/td>\n10.647<\/td>\n<\/tr>\n
    M12\u00d71.5<\/td>\n4.5<\/td>\n13<\/td>\n11.216<\/td>\n11.026<\/td>\n10.676<\/td>\n10.376<\/td>\n<\/tr>\n
    M14\u00d71.5<\/td>\n5.6<\/td>\n16<\/td>\n13.216<\/td>\n13.026<\/td>\n12.676<\/td>\n12.376<\/td>\n<\/tr>\n
    M16\u00d71.5<\/td>\n5.6<\/td>\n16<\/td>\n15.216<\/td>\n15.026<\/td>\n14.676<\/td>\n14.376<\/td>\n<\/tr>\n
    M18\u00d71.5<\/td>\n5.6<\/td>\n16<\/td>\n17.216<\/td>\n17.026<\/td>\n16.676<\/td>\n16.376<\/td>\n<\/tr>\n
    M18\u00d72<\/td>\n5.6<\/td>\n16<\/td>\n16.913<\/td>\n16.701<\/td>\n16.21<\/td>\n15.835<\/td>\n<\/tr>\n
    M20\u00d71.5<\/td>\n5.6<\/td>\n16<\/td>\n19.216<\/td>\n19.026<\/td>\n18.676<\/td>\n18.376<\/td>\n<\/tr>\n
    M20\u00d72<\/td>\n5.6<\/td>\n16<\/td>\n18.913<\/td>\n18.701<\/td>\n18.21<\/td>\n17.835<\/td>\n<\/tr>\n
    M22\u00d71.5<\/td>\n5.6<\/td>\n16<\/td>\n21.216<\/td>\n21.026<\/td>\n20.676<\/td>\n20.376<\/td>\n<\/tr>\n
    M22\u00d72<\/td>\n5.6<\/td>\n16<\/td>\n20.913<\/td>\n20.701<\/td>\n20.21<\/td>\n19.835<\/td>\n<\/tr>\n
    M24\u00d72<\/td>\n8.5<\/td>\n25<\/td>\n22.925<\/td>\n22.701<\/td>\n22.21<\/td>\n21.835<\/td>\n<\/tr>\n
    M27\u00d72<\/td>\n8.5<\/td>\n25<\/td>\n25.925<\/td>\n25.701<\/td>\n25.21<\/td>\n24.835<\/td>\n<\/tr>\n
    M30\u00d72<\/td>\n8.5<\/td>\n25<\/td>\n28.925<\/td>\n28.701<\/td>\n28.21<\/td>\n27.835<\/td>\n<\/tr>\n
    M33\u00d72<\/td>\n8.5<\/td>\n25<\/td>\n31.925<\/td>\n31.701<\/td>\n31.21<\/td>\n30.835<\/td>\n<\/tr>\n
    M36\u00d73<\/td>\n12<\/td>\n36<\/td>\n34.316<\/td>\n34.051<\/td>\n33.252<\/td>\n32.752<\/td>\n<\/tr>\n
    M39\u00d73<\/td>\n12<\/td>\n36<\/td>\n37.316<\/td>\n37.051<\/td>\n36.252<\/td>\n35.752<\/td>\n<\/tr>\n
    M42\u00d73<\/td>\n12<\/td>\n36<\/td>\n40.316<\/td>\n40.051<\/td>\n39.252<\/td>\n38.752<\/td>\n<\/tr>\n
    M45\u00d73<\/td>\n12<\/td>\n36<\/td>\n43.316<\/td>\n43.051<\/td>\n42.252<\/td>\n41.752<\/td>\n<\/tr>\n
    M48\u00d73<\/td>\n15<\/td>\n45<\/td>\n46.331<\/td>\n46.051<\/td>\n45.252<\/td>\n44.752<\/td>\n<\/tr>\n
    M52\u00d74<\/td>\n19<\/td>\n56<\/td>\n49.717<\/td>\n49.402<\/td>\n48.27<\/td>\n47.67<\/td>\n<\/tr>\n
    M56\u00d74<\/td>\n19<\/td>\n56<\/td>\n53.717<\/td>\n53.402<\/td>\n52.27<\/td>\n51.67<\/td>\n<\/tr>\n
    M60\u00d74<\/td>\n19<\/td>\n56<\/td>\n57.717<\/td>\n57.402<\/td>\n56.27<\/td>\n55.67<\/td>\n<\/tr>\n
    M64\u00d74<\/td>\n19<\/td>\n56<\/td>\n61.717<\/td>\n61.402<\/td>\n60.27<\/td>\n59.67<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

    Nilai-nilai ini menyokong pengagihan beban yang lebih halus dalam persekitaran getaran tinggi.<\/p>\n<\/div>\n

    \n

    Benang Luaran Pitch Halus<\/h2>\n

    Ketepatan sederhana, penglibatan sederhana, zon toleransi 6g. Menyediakan keratan teras yang lebih kuat untuk kekuatan ricih yang dipertingkatkan.<\/p>\n

    \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
    Benang<\/th>\nTempoh Pertunangan<\/th>\nDiameter Utama d<\/th>\nDiameter Pitch d2<\/sub><\/th>\nJejari Punca Minseorang<\/sup><\/th>\n<\/tr>\n
    ><\/th>\n\u2264<\/th>\nmaksimum<\/th>\nmin<\/th>\nmaksimum<\/th>\nmin<\/th>\nmin<\/th>\n<\/tr>\n<\/thead>\n
    M8\u00d71<\/td>\n3<\/td>\n9<\/td>\n7.974<\/td>\n7.794<\/td>\n7.324<\/td>\n7.212<\/td>\n0.125<\/td>\n<\/tr>\n
    M10\u00d71<\/td>\n4<\/td>\n12<\/td>\n9.974<\/td>\n9.794<\/td>\n9.324<\/td>\n9.212<\/td>\n0.125<\/td>\n<\/tr>\n
    M10\u00d71.25<\/td>\n4<\/td>\n12<\/td>\n9.972<\/td>\n9.76<\/td>\n9.16<\/td>\n9.042<\/td>\n0.156<\/td>\n<\/tr>\n
    M12\u00d71.25<\/td>\n4.5<\/td>\n13<\/td>\n11.972<\/td>\n11.76<\/td>\n11.16<\/td>\n11.028<\/td>\n0.156<\/td>\n<\/tr>\n
    M12\u00d71.5<\/td>\n4.5<\/td>\n13<\/td>\n11.968<\/td>\n11.732<\/td>\n10.994<\/td>\n10.854<\/td>\n0.188<\/td>\n<\/tr>\n
    M14\u00d71.5<\/td>\n5.6<\/td>\n16<\/td>\n13.968<\/td>\n13.732<\/td>\n12.994<\/td>\n12.854<\/td>\n0.188<\/td>\n<\/tr>\n
    M16\u00d71.5<\/td>\n5.6<\/td>\n16<\/td>\n15.968<\/td>\n15.732<\/td>\n14.994<\/td>\n14.854<\/td>\n0.188<\/td>\n<\/tr>\n
    M18\u00d71.5<\/td>\n5.6<\/td>\n16<\/td>\n17.968<\/td>\n17.732<\/td>\n16.994<\/td>\n16.854<\/td>\n0.188<\/td>\n<\/tr>\n
    M18\u00d72<\/td>\n5.6<\/td>\n16<\/td>\n17.962<\/td>\n17.682<\/td>\n16.663<\/td>\n16.503<\/td>\n0.25<\/td>\n<\/tr>\n
    M20\u00d71.5<\/td>\n5.6<\/td>\n16<\/td>\n19.968<\/td>\n19.732<\/td>\n18.994<\/td>\n18.854<\/td>\n0.188<\/td>\n<\/tr>\n
    M20\u00d72<\/td>\n5.6<\/td>\n16<\/td>\n19.962<\/td>\n19.682<\/td>\n18.663<\/td>\n18.503<\/td>\n0.25<\/td>\n<\/tr>\n
    M22\u00d71.5<\/td>\n5.6<\/td>\n16<\/td>\n21.968<\/td>\n21.732<\/td>\n20.994<\/td>\n20.854<\/td>\n0.188<\/td>\n<\/tr>\n
    M22\u00d72<\/td>\n5.6<\/td>\n16<\/td>\n21.962<\/td>\n21.682<\/td>\n20.663<\/td>\n20.503<\/td>\n0.25<\/td>\n<\/tr>\n
    M24\u00d72<\/td>\n8.5<\/td>\n25<\/td>\n23.962<\/td>\n23.682<\/td>\n22.663<\/td>\n22.493<\/td>\n0.25<\/td>\n<\/tr>\n
    M27\u00d72<\/td>\n8.5<\/td>\n25<\/td>\n26.962<\/td>\n26.682<\/td>\n25.663<\/td>\n25.493<\/td>\n0.25<\/td>\n<\/tr>\n
    M30\u00d72<\/td>\n8.5<\/td>\n25<\/td>\n29.962<\/td>\n29.682<\/td>\n28.663<\/td>\n28.493<\/td>\n0.25<\/td>\n<\/tr>\n
    M33\u00d72<\/td>\n8.5<\/td>\n25<\/td>\n32.962<\/td>\n32.682<\/td>\n31.663<\/td>\n31.493<\/td>\n0.25<\/td>\n<\/tr>\n
    M36\u00d73<\/td>\n12<\/td>\n36<\/td>\n35.952<\/td>\n35.577<\/td>\n34.003<\/td>\n33.803<\/td>\n0.375<\/td>\n<\/tr>\n
    M39\u00d73<\/td>\n12<\/td>\n36<\/td>\n38.952<\/td>\n38.577<\/td>\n37.003<\/td>\n36.803<\/td>\n0.375<\/td>\n<\/tr>\n
    M42\u00d73<\/td>\n12<\/td>\n36<\/td>\n41.952<\/td>\n41.577<\/td>\n40.003<\/td>\n39.803<\/td>\n0.375<\/td>\n<\/tr>\n
    M45\u00d73<\/td>\n12<\/td>\n36<\/td>\n44.952<\/td>\n44.577<\/td>\n43.003<\/td>\n42.803<\/td>\n0.375<\/td>\n<\/tr>\n
    M48\u00d73<\/td>\n15<\/td>\n45<\/td>\n47.952<\/td>\n47.577<\/td>\n46.003<\/td>\n45.791<\/td>\n0.375<\/td>\n<\/tr>\n
    M52\u00d74<\/td>\n19<\/td>\n56<\/td>\n51.94<\/td>\n51.465<\/td>\n49.342<\/td>\n49.106<\/td>\n0.5<\/td>\n<\/tr>\n
    M56\u00d74<\/td>\n19<\/td>\n56<\/td>\n55.94<\/td>\n55.465<\/td>\n53.342<\/td>\n53.106<\/td>\n0.5<\/td>\n<\/tr>\n
    M60\u00d74<\/td>\n19<\/td>\n56<\/td>\n59.94<\/td>\n59.465<\/td>\n57.342<\/td>\n57.106<\/td>\n0.5<\/td>\n<\/tr>\n
    M64\u00d74<\/td>\n19<\/td>\n56<\/td>\n63.94<\/td>\n63.465<\/td>\n61.342<\/td>\n61.106<\/td>\n0.5<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

    seorang<\/sup> Lihat GB\/T 197-2003 untuk spesifikasi jejari akar, penting untuk mengelakkan kepekatan tegasan.<\/p>\n<\/div>\n

    \n

    Soalan Lazim<\/h2>\n

    Zon toleransi apakah yang terpakai pada benang dalaman kasar?<\/h3>\n

    5H untuk diameter \u22641.4 mm; 6H untuk >1.4 mm, memastikan padanan ketepatan sederhana.<\/p>\n

    Bagaimanakah penyaduran mempengaruhi dimensi benang?<\/h3>\n

    Toleransi adalah pra-penyaduran; profil pasca-penyaduran tidak boleh melebihi kedudukan H\/h untuk salutan nipis bagi mengekalkan pemasangan.<\/p>\n

    Mengapa menggunakan benang pic halus?<\/h3>\n

    Ia memberikan rintangan getaran yang lebih baik dan pelarasan yang lebih halus, dengan teras yang lebih kuat mengikut had dalam jadual 3 dan 4.<\/p>\n

    Apakah tempoh pertunangan sederhana?<\/h3>\n

    Ia mengimbangi kekuatan dan kos benang; gunakan nilai jadual untuk julat tertentu bagi mengelakkan penglibatan yang berlebihan atau kurang.<\/p>\n

    Bagaimana untuk mentafsir jejari akar?<\/h3>\n

    Nilai minimum setiap GB\/T 197-2003 mengurangkan tekanan; penting untuk aplikasi yang mudah letih.<\/p>\n

    Adakah had ini untuk semua bahan?<\/h3>\n

    Ya, tetapi laraskan untuk penyaduran khas; rujuk piawaian untuk salutan berat yang memerlukan benang bersaiz besar.<\/p>\n<\/div>\n

     [\/et_pb_text][\/et_pb_column]
    \n\t\t\t[\/et_pb_row]
    \n\t\t[\/et_pb_section]<\/p>","protected":false},"excerpt":{"rendered":"

    Introduction to GB\/T 9145-2003 Standard This standard specifies limit dimensions for general-purpose metric screw threads of medium accuracy in the preferred series, ensuring interchangeability and performance in mechanical assemblies. It covers coarse and fine pitch threads for internal and external applications, with tolerances applied before plating for thin coatings. Scope GB\/T 9145-2003 defines the limit […]<\/p>","protected":false},"author":2,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_et_pb_use_builder":"on","_et_pb_old_content":"

    \r\n

    Introduction to GB\/T 9145-2003 Standard<\/h2>\r\nThis standard specifies limit dimensions for general-purpose metric screw threads of medium accuracy in the preferred series, ensuring interchangeability and performance in mechanical assemblies. It covers coarse and fine pitch threads for internal and external applications, with tolerances applied before plating for thin coatings.\r\n\r\n<\/div>\r\n
    \r\n

    Scope<\/h2>\r\nGB\/T 9145-2003 defines the limit dimensions for metric screw threads with medium tolerance precision and preferred series, applicable to general engineering purposes. It ensures that thread profiles do not exceed the maximum material condition defined by basic profiles and tolerance positions. This is crucial for fasteners in industries requiring reliable mating without interference, especially post-plating.\r\n
      \r\n \t
    • Applies to threads before thin coatings like electroplating.<\/li>\r\n \t
    • Post-plating, profiles must stay within H or h positions.<\/li>\r\n \t
    • Focuses on medium engagement lengths for balanced strength and manufacturability.<\/li>\r\n<\/ul>\r\n<\/div>\r\n
      \r\n

      General Limit Dimensions<\/h2>\r\nNo point on the thread root profile shall exceed the maximum entity profile per basic form and tolerance. For plated threads, actual contours post-plating must not surpass H\/h positions. This prevents over-tightening or failure in assemblies. Note: Tolerances suit thin platings; heavier coatings require adjustments.\r\n\r\n<\/div>\r\n
      \r\n

      Coarse Pitch Internal Threads<\/h2>\r\nFor medium precision, engagement length is medium. Tolerance zones: 5H for d \u2264 1.4 mm; 6H for d > 1.4 mm. Limits for pitch diameter D2<\/sub> and minor diameter D1<\/sub> ensure proper fit with external threads.\r\n
      \r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n
      Thread<\/th>\r\nEngagement Length<\/th>\r\nPitch Diameter D2<\/sub><\/th>\r\nMinor Diameter D1<\/sub><\/th>\r\n<\/tr>\r\n
      ><\/th>\r\n\u2264<\/th>\r\nmax<\/th>\r\nmin<\/th>\r\nmax<\/th>\r\nmin<\/th>\r\n<\/tr>\r\n<\/thead>\r\n
      M1<\/td>\r\n0.6<\/td>\r\n1.7<\/td>\r\n0.894<\/td>\r\n0.838<\/td>\r\n0.785<\/td>\r\n0.729<\/td>\r\n<\/tr>\r\n
      M1.2<\/td>\r\n0.6<\/td>\r\n1.7<\/td>\r\n1.094<\/td>\r\n1.038<\/td>\r\n0.985<\/td>\r\n0.929<\/td>\r\n<\/tr>\r\n
      M1.4<\/td>\r\n0.7<\/td>\r\n2<\/td>\r\n1.265<\/td>\r\n1.205<\/td>\r\n1.142<\/td>\r\n1.075<\/td>\r\n<\/tr>\r\n
      M1.6<\/td>\r\n0.8<\/td>\r\n2.6<\/td>\r\n1.458<\/td>\r\n1.373<\/td>\r\n1.321<\/td>\r\n1.221<\/td>\r\n<\/tr>\r\n
      M1.8<\/td>\r\n0.8<\/td>\r\n2.6<\/td>\r\n1.658<\/td>\r\n1.573<\/td>\r\n1.521<\/td>\r\n1.421<\/td>\r\n<\/tr>\r\n
      M2<\/td>\r\n1<\/td>\r\n3<\/td>\r\n1.83<\/td>\r\n1.74<\/td>\r\n1.679<\/td>\r\n1.567<\/td>\r\n<\/tr>\r\n
      M2.5<\/td>\r\n1.3<\/td>\r\n3.8<\/td>\r\n2.303<\/td>\r\n2.208<\/td>\r\n2.138<\/td>\r\n2.013<\/td>\r\n<\/tr>\r\n
      M3<\/td>\r\n1.5<\/td>\r\n4.5<\/td>\r\n2.775<\/td>\r\n2.675<\/td>\r\n2.599<\/td>\r\n2.459<\/td>\r\n<\/tr>\r\n
      M3.5<\/td>\r\n1.7<\/td>\r\n5<\/td>\r\n3.222<\/td>\r\n3.11<\/td>\r\n3.01<\/td>\r\n2.85<\/td>\r\n<\/tr>\r\n
      M4<\/td>\r\n2<\/td>\r\n6<\/td>\r\n3.663<\/td>\r\n3.545<\/td>\r\n3.422<\/td>\r\n3.242<\/td>\r\n<\/tr>\r\n
      M5<\/td>\r\n2.5<\/td>\r\n7.5<\/td>\r\n4.605<\/td>\r\n4.48<\/td>\r\n4.334<\/td>\r\n4.134<\/td>\r\n<\/tr>\r\n
      M6<\/td>\r\n3<\/td>\r\n9<\/td>\r\n5.5<\/td>\r\n5.35<\/td>\r\n5.153<\/td>\r\n4.917<\/td>\r\n<\/tr>\r\n
      M7<\/td>\r\n3<\/td>\r\n9<\/td>\r\n6.5<\/td>\r\n6.35<\/td>\r\n6.153<\/td>\r\n5.917<\/td>\r\n<\/tr>\r\n
      M8<\/td>\r\n4<\/td>\r\n12<\/td>\r\n7.348<\/td>\r\n7.188<\/td>\r\n6.912<\/td>\r\n6.647<\/td>\r\n<\/tr>\r\n
      M10<\/td>\r\n5<\/td>\r\n15<\/td>\r\n9.206<\/td>\r\n9.026<\/td>\r\n8.676<\/td>\r\n8.376<\/td>\r\n<\/tr>\r\n
      M12<\/td>\r\n6<\/td>\r\n18<\/td>\r\n11.063<\/td>\r\n10.863<\/td>\r\n10.441<\/td>\r\n10.106<\/td>\r\n<\/tr>\r\n
      M14<\/td>\r\n8<\/td>\r\n24<\/td>\r\n12.913<\/td>\r\n12.701<\/td>\r\n12.21<\/td>\r\n11.835<\/td>\r\n<\/tr>\r\n
      M16<\/td>\r\n8<\/td>\r\n24<\/td>\r\n14.913<\/td>\r\n14.701<\/td>\r\n14.21<\/td>\r\n13.835<\/td>\r\n<\/tr>\r\n
      M18<\/td>\r\n10<\/td>\r\n30<\/td>\r\n16.6<\/td>\r\n16.376<\/td>\r\n15.744<\/td>\r\n15.294<\/td>\r\n<\/tr>\r\n
      M20<\/td>\r\n10<\/td>\r\n30<\/td>\r\n18.6<\/td>\r\n18.376<\/td>\r\n17.744<\/td>\r\n17.294<\/td>\r\n<\/tr>\r\n
      M22<\/td>\r\n10<\/td>\r\n30<\/td>\r\n20.6<\/td>\r\n20.376<\/td>\r\n19.744<\/td>\r\n19.294<\/td>\r\n<\/tr>\r\n
      M24<\/td>\r\n12<\/td>\r\n36<\/td>\r\n22.316<\/td>\r\n22.051<\/td>\r\n21.252<\/td>\r\n20.752<\/td>\r\n<\/tr>\r\n
      M27<\/td>\r\n12<\/td>\r\n36<\/td>\r\n25.316<\/td>\r\n25.051<\/td>\r\n24.252<\/td>\r\n23.752<\/td>\r\n<\/tr>\r\n
      M30<\/td>\r\n15<\/td>\r\n45<\/td>\r\n28.007<\/td>\r\n27.727<\/td>\r\n26.771<\/td>\r\n26.211<\/td>\r\n<\/tr>\r\n
      M33<\/td>\r\n15<\/td>\r\n45<\/td>\r\n31.007<\/td>\r\n30.727<\/td>\r\n29.771<\/td>\r\n29.211<\/td>\r\n<\/tr>\r\n
      M36<\/td>\r\n18<\/td>\r\n53<\/td>\r\n33.702<\/td>\r\n33.402<\/td>\r\n32.27<\/td>\r\n31.67<\/td>\r\n<\/tr>\r\n
      M39<\/td>\r\n18<\/td>\r\n53<\/td>\r\n36.702<\/td>\r\n36.402<\/td>\r\n35.27<\/td>\r\n34.67<\/td>\r\n<\/tr>\r\n
      M42<\/td>\r\n21<\/td>\r\n63<\/td>\r\n39.392<\/td>\r\n39.077<\/td>\r\n37.799<\/td>\r\n37.129<\/td>\r\n<\/tr>\r\n
      M45<\/td>\r\n21<\/td>\r\n63<\/td>\r\n42.392<\/td>\r\n42.077<\/td>\r\n40.799<\/td>\r\n40.129<\/td>\r\n<\/tr>\r\n
      M48<\/td>\r\n24<\/td>\r\n71<\/td>\r\n45.087<\/td>\r\n44.752<\/td>\r\n43.297<\/td>\r\n42.587<\/td>\r\n<\/tr>\r\n
      M52<\/td>\r\n24<\/td>\r\n71<\/td>\r\n49.087<\/td>\r\n48.752<\/td>\r\n46.681<\/td>\r\n45.971<\/td>\r\n<\/tr>\r\n
      M56<\/td>\r\n28<\/td>\r\n85<\/td>\r\n52.783<\/td>\r\n52.428<\/td>\r\n50.796<\/td>\r\n50.046<\/td>\r\n<\/tr>\r\n
      M60<\/td>\r\n28<\/td>\r\n85<\/td>\r\n56.783<\/td>\r\n56.428<\/td>\r\n54.796<\/td>\r\n54.046<\/td>\r\n<\/tr>\r\n
      M64<\/td>\r\n32<\/td>\r\n95<\/td>\r\n60.478<\/td>\r\n60.103<\/td>\r\n58.305<\/td>\r\n57.505<\/td>\r\n<\/tr>\r\n<\/tbody>\r\n<\/table>\r\n<\/div>\r\nThese dimensions provide guidance for nut manufacturing, ensuring compatibility with bolts under medium load conditions.\r\n\r\n<\/div>\r\n
      \r\n

      Coarse Pitch External Threads<\/h2>\r\nMedium precision, medium engagement. Tolerance zones: 6h for d \u2264 1.4 mm; 6g for d > 1.4 mm. Limits for major diameter d and pitch diameter d2<\/sub>, with min root radius per GB\/T 197-2003.\r\n
      \r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n
      Thread<\/th>\r\nEngagement Length<\/th>\r\nMajor Diameter d<\/th>\r\nPitch Diameter d2<\/sub><\/th>\r\nMin Root Radiusa<\/sup><\/th>\r\n<\/tr>\r\n
      ><\/th>\r\n\u2264<\/th>\r\nmax<\/th>\r\nmin<\/th>\r\nmax<\/th>\r\nmin<\/th>\r\nmin<\/th>\r\n<\/tr>\r\n<\/thead>\r\n
      M1<\/td>\r\n0.6<\/td>\r\n1.7<\/td>\r\n1<\/td>\r\n0.933<\/td>\r\n0.838<\/td>\r\n0.785<\/td>\r\n0.031<\/td>\r\n<\/tr>\r\n
      M1.2<\/td>\r\n0.6<\/td>\r\n1.7<\/td>\r\n1.2<\/td>\r\n1.133<\/td>\r\n1.038<\/td>\r\n0.985<\/td>\r\n0.031<\/td>\r\n<\/tr>\r\n
      M1.4<\/td>\r\n0.7<\/td>\r\n2<\/td>\r\n1.4<\/td>\r\n1.325<\/td>\r\n1.205<\/td>\r\n1.149<\/td>\r\n0.038<\/td>\r\n<\/tr>\r\n
      M1.6<\/td>\r\n0.8<\/td>\r\n2.6<\/td>\r\n1.581<\/td>\r\n1.496<\/td>\r\n1.354<\/td>\r\n1.291<\/td>\r\n0.044<\/td>\r\n<\/tr>\r\n
      M1.8<\/td>\r\n0.8<\/td>\r\n2.6<\/td>\r\n1.781<\/td>\r\n1.696<\/td>\r\n1.554<\/td>\r\n1.491<\/td>\r\n0.044<\/td>\r\n<\/tr>\r\n
      M2<\/td>\r\n1<\/td>\r\n3<\/td>\r\n1.981<\/td>\r\n1.886<\/td>\r\n1.721<\/td>\r\n1.654<\/td>\r\n0.05<\/td>\r\n<\/tr>\r\n
      M2.5<\/td>\r\n1.3<\/td>\r\n3.8<\/td>\r\n2.48<\/td>\r\n2.38<\/td>\r\n2.188<\/td>\r\n2.117<\/td>\r\n0.056<\/td>\r\n<\/tr>\r\n
      M3<\/td>\r\n1.5<\/td>\r\n4.5<\/td>\r\n2.98<\/td>\r\n2.874<\/td>\r\n2.655<\/td>\r\n2.58<\/td>\r\n0.063<\/td>\r\n<\/tr>\r\n
      M3.5<\/td>\r\n1.7<\/td>\r\n5<\/td>\r\n3.479<\/td>\r\n3.354<\/td>\r\n3.089<\/td>\r\n3.004<\/td>\r\n0.075<\/td>\r\n<\/tr>\r\n
      M4<\/td>\r\n2<\/td>\r\n6<\/td>\r\n3.978<\/td>\r\n3.838<\/td>\r\n3.523<\/td>\r\n3.433<\/td>\r\n0.088<\/td>\r\n<\/tr>\r\n
      M5<\/td>\r\n2.5<\/td>\r\n7.5<\/td>\r\n4.976<\/td>\r\n4.826<\/td>\r\n4.456<\/td>\r\n4.361<\/td>\r\n0.1<\/td>\r\n<\/tr>\r\n
      M6<\/td>\r\n3<\/td>\r\n9<\/td>\r\n5.974<\/td>\r\n5.794<\/td>\r\n5.324<\/td>\r\n5.212<\/td>\r\n0.125<\/td>\r\n<\/tr>\r\n
      M7<\/td>\r\n3<\/td>\r\n9<\/td>\r\n6.974<\/td>\r\n6.794<\/td>\r\n6.324<\/td>\r\n6.212<\/td>\r\n0.125<\/td>\r\n<\/tr>\r\n
      M8<\/td>\r\n4<\/td>\r\n12<\/td>\r\n7.972<\/td>\r\n7.76<\/td>\r\n7.16<\/td>\r\n7.042<\/td>\r\n0.156<\/td>\r\n<\/tr>\r\n
      M10<\/td>\r\n5<\/td>\r\n15<\/td>\r\n9.968<\/td>\r\n9.732<\/td>\r\n8.994<\/td>\r\n8.862<\/td>\r\n0.188<\/td>\r\n<\/tr>\r\n
      M12<\/td>\r\n6<\/td>\r\n18<\/td>\r\n11.966<\/td>\r\n11.701<\/td>\r\n10.829<\/td>\r\n10.679<\/td>\r\n0.219<\/td>\r\n<\/tr>\r\n
      M14<\/td>\r\n8<\/td>\r\n24<\/td>\r\n13.962<\/td>\r\n13.682<\/td>\r\n12.663<\/td>\r\n12.503<\/td>\r\n0.25<\/td>\r\n<\/tr>\r\n
      M16<\/td>\r\n8<\/td>\r\n24<\/td>\r\n15.962<\/td>\r\n15.682<\/td>\r\n14.663<\/td>\r\n14.503<\/td>\r\n0.25<\/td>\r\n<\/tr>\r\n
      M18<\/td>\r\n10<\/td>\r\n30<\/td>\r\n17.958<\/td>\r\n17.623<\/td>\r\n16.334<\/td>\r\n16.164<\/td>\r\n0.313<\/td>\r\n<\/tr>\r\n
      M20<\/td>\r\n10<\/td>\r\n30<\/td>\r\n19.958<\/td>\r\n19.623<\/td>\r\n18.334<\/td>\r\n18.164<\/td>\r\n0.313<\/td>\r\n<\/tr>\r\n
      M22<\/td>\r\n10<\/td>\r\n30<\/td>\r\n21.958<\/td>\r\n21.623<\/td>\r\n20.334<\/td>\r\n20.164<\/td>\r\n0.313<\/td>\r\n<\/tr>\r\n
      M24<\/td>\r\n12<\/td>\r\n36<\/td>\r\n23.952<\/td>\r\n23.577<\/td>\r\n22.003<\/td>\r\n21.803<\/td>\r\n0.375<\/td>\r\n<\/tr>\r\n
      M27<\/td>\r\n12<\/td>\r\n36<\/td>\r\n26.952<\/td>\r\n26.577<\/td>\r\n25.003<\/td>\r\n24.803<\/td>\r\n0.375<\/td>\r\n<\/tr>\r\n
      M30<\/td>\r\n15<\/td>\r\n45<\/td>\r\n29.947<\/td>\r\n29.522<\/td>\r\n27.674<\/td>\r\n27.462<\/td>\r\n0.438<\/td>\r\n<\/tr>\r\n
      M33<\/td>\r\n15<\/td>\r\n45<\/td>\r\n32.947<\/td>\r\n32.522<\/td>\r\n30.674<\/td>\r\n30.462<\/td>\r\n0.438<\/td>\r\n<\/tr>\r\n
      M36<\/td>\r\n18<\/td>\r\n53<\/td>\r\n35.94<\/td>\r\n35.465<\/td>\r\n33.342<\/td>\r\n33.118<\/td>\r\n0.5<\/td>\r\n<\/tr>\r\n
      M39<\/td>\r\n18<\/td>\r\n53<\/td>\r\n38.94<\/td>\r\n38.465<\/td>\r\n36.342<\/td>\r\n36.118<\/td>\r\n0.5<\/td>\r\n<\/tr>\r\n
      M42<\/td>\r\n21<\/td>\r\n63<\/td>\r\n41.937<\/td>\r\n41.437<\/td>\r\n39.014<\/td>\r\n38.778<\/td>\r\n0.563<\/td>\r\n<\/tr>\r\n
      M45<\/td>\r\n21<\/td>\r\n63<\/td>\r\n44.937<\/td>\r\n44.437<\/td>\r\n42.014<\/td>\r\n41.778<\/td>\r\n0.563<\/td>\r\n<\/tr>\r\n
      M48<\/td>\r\n24<\/td>\r\n71<\/td>\r\n47.929<\/td>\r\n47.399<\/td>\r\n44.681<\/td>\r\n44.431<\/td>\r\n0.625<\/td>\r\n<\/tr>\r\n
      M52<\/td>\r\n24<\/td>\r\n71<\/td>\r\n51.929<\/td>\r\n51.399<\/td>\r\n48.681<\/td>\r\n48.431<\/td>\r\n0.625<\/td>\r\n<\/tr>\r\n
      M56<\/td>\r\n28<\/td>\r\n85<\/td>\r\n55.925<\/td>\r\n55.365<\/td>\r\n52.353<\/td>\r\n52.088<\/td>\r\n0.688<\/td>\r\n<\/tr>\r\n
      M60<\/td>\r\n28<\/td>\r\n85<\/td>\r\n59.925<\/td>\r\n59.365<\/td>\r\n56.353<\/td>\r\n56.088<\/td>\r\n0.688<\/td>\r\n<\/tr>\r\n
      M64<\/td>\r\n32<\/td>\r\n95<\/td>\r\n63.92<\/td>\r\n63.32<\/td>\r\n60.023<\/td>\r\n59.743<\/td>\r\n0.75<\/td>\r\n<\/tr>\r\n<\/tbody>\r\n<\/table>\r\n<\/div>\r\na<\/sup> See GB\/T 197-2003 Chapter 7 and Table 9 for root radius details. These ensure stress distribution and fatigue resistance.\r\n\r\n<\/div>\r\n
      \r\n

      Fine Pitch Internal Threads<\/h2>\r\nMedium precision, medium engagement, 6H tolerance zone. Fine pitches offer better vibration resistance and adjustment precision.\r\n
      \r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n
      Thread<\/th>\r\nEngagement Length<\/th>\r\nPitch Diameter D2<\/sub><\/th>\r\nMinor Diameter D1<\/sub><\/th>\r\n<\/tr>\r\n
      ><\/th>\r\n\u2264<\/th>\r\nmax<\/th>\r\nmin<\/th>\r\nmax<\/th>\r\nmin<\/th>\r\n<\/tr>\r\n<\/thead>\r\n
      M8\u00d71<\/td>\r\n3<\/td>\r\n9<\/td>\r\n7.5<\/td>\r\n7.35<\/td>\r\n7.153<\/td>\r\n6.917<\/td>\r\n<\/tr>\r\n
      M10\u00d71<\/td>\r\n4<\/td>\r\n12<\/td>\r\n9.5<\/td>\r\n9.35<\/td>\r\n9.153<\/td>\r\n8.917<\/td>\r\n<\/tr>\r\n
      M10\u00d71.25<\/td>\r\n4<\/td>\r\n12<\/td>\r\n9.348<\/td>\r\n9.188<\/td>\r\n8.912<\/td>\r\n8.647<\/td>\r\n<\/tr>\r\n
      M12\u00d71.25<\/td>\r\n4.5<\/td>\r\n13<\/td>\r\n11.368<\/td>\r\n11.188<\/td>\r\n10.912<\/td>\r\n10.647<\/td>\r\n<\/tr>\r\n
      M12\u00d71.5<\/td>\r\n4.5<\/td>\r\n13<\/td>\r\n11.216<\/td>\r\n11.026<\/td>\r\n10.676<\/td>\r\n10.376<\/td>\r\n<\/tr>\r\n
      M14\u00d71.5<\/td>\r\n5.6<\/td>\r\n16<\/td>\r\n13.216<\/td>\r\n13.026<\/td>\r\n12.676<\/td>\r\n12.376<\/td>\r\n<\/tr>\r\n
      M16\u00d71.5<\/td>\r\n5.6<\/td>\r\n16<\/td>\r\n15.216<\/td>\r\n15.026<\/td>\r\n14.676<\/td>\r\n14.376<\/td>\r\n<\/tr>\r\n
      M18\u00d71.5<\/td>\r\n5.6<\/td>\r\n16<\/td>\r\n17.216<\/td>\r\n17.026<\/td>\r\n16.676<\/td>\r\n16.376<\/td>\r\n<\/tr>\r\n
      M18\u00d72<\/td>\r\n5.6<\/td>\r\n16<\/td>\r\n16.913<\/td>\r\n16.701<\/td>\r\n16.21<\/td>\r\n15.835<\/td>\r\n<\/tr>\r\n
      M20\u00d71.5<\/td>\r\n5.6<\/td>\r\n16<\/td>\r\n19.216<\/td>\r\n19.026<\/td>\r\n18.676<\/td>\r\n18.376<\/td>\r\n<\/tr>\r\n
      M20\u00d72<\/td>\r\n5.6<\/td>\r\n16<\/td>\r\n18.913<\/td>\r\n18.701<\/td>\r\n18.21<\/td>\r\n17.835<\/td>\r\n<\/tr>\r\n
      M22\u00d71.5<\/td>\r\n5.6<\/td>\r\n16<\/td>\r\n21.216<\/td>\r\n21.026<\/td>\r\n20.676<\/td>\r\n20.376<\/td>\r\n<\/tr>\r\n
      M22\u00d72<\/td>\r\n5.6<\/td>\r\n16<\/td>\r\n20.913<\/td>\r\n20.701<\/td>\r\n20.21<\/td>\r\n19.835<\/td>\r\n<\/tr>\r\n
      M24\u00d72<\/td>\r\n8.5<\/td>\r\n25<\/td>\r\n22.925<\/td>\r\n22.701<\/td>\r\n22.21<\/td>\r\n21.835<\/td>\r\n<\/tr>\r\n
      M27\u00d72<\/td>\r\n8.5<\/td>\r\n25<\/td>\r\n25.925<\/td>\r\n25.701<\/td>\r\n25.21<\/td>\r\n24.835<\/td>\r\n<\/tr>\r\n
      M30\u00d72<\/td>\r\n8.5<\/td>\r\n25<\/td>\r\n28.925<\/td>\r\n28.701<\/td>\r\n28.21<\/td>\r\n27.835<\/td>\r\n<\/tr>\r\n
      M33\u00d72<\/td>\r\n8.5<\/td>\r\n25<\/td>\r\n31.925<\/td>\r\n31.701<\/td>\r\n31.21<\/td>\r\n30.835<\/td>\r\n<\/tr>\r\n
      M36\u00d73<\/td>\r\n12<\/td>\r\n36<\/td>\r\n34.316<\/td>\r\n34.051<\/td>\r\n33.252<\/td>\r\n32.752<\/td>\r\n<\/tr>\r\n
      M39\u00d73<\/td>\r\n12<\/td>\r\n36<\/td>\r\n37.316<\/td>\r\n37.051<\/td>\r\n36.252<\/td>\r\n35.752<\/td>\r\n<\/tr>\r\n
      M42\u00d73<\/td>\r\n12<\/td>\r\n36<\/td>\r\n40.316<\/td>\r\n40.051<\/td>\r\n39.252<\/td>\r\n38.752<\/td>\r\n<\/tr>\r\n
      M45\u00d73<\/td>\r\n12<\/td>\r\n36<\/td>\r\n43.316<\/td>\r\n43.051<\/td>\r\n42.252<\/td>\r\n41.752<\/td>\r\n<\/tr>\r\n
      M48\u00d73<\/td>\r\n15<\/td>\r\n45<\/td>\r\n46.331<\/td>\r\n46.051<\/td>\r\n45.252<\/td>\r\n44.752<\/td>\r\n<\/tr>\r\n
      M52\u00d74<\/td>\r\n19<\/td>\r\n56<\/td>\r\n49.717<\/td>\r\n49.402<\/td>\r\n48.27<\/td>\r\n47.67<\/td>\r\n<\/tr>\r\n
      M56\u00d74<\/td>\r\n19<\/td>\r\n56<\/td>\r\n53.717<\/td>\r\n53.402<\/td>\r\n52.27<\/td>\r\n51.67<\/td>\r\n<\/tr>\r\n
      M60\u00d74<\/td>\r\n19<\/td>\r\n56<\/td>\r\n57.717<\/td>\r\n57.402<\/td>\r\n56.27<\/td>\r\n55.67<\/td>\r\n<\/tr>\r\n
      M64\u00d74<\/td>\r\n19<\/td>\r\n56<\/td>\r\n61.717<\/td>\r\n61.402<\/td>\r\n60.27<\/td>\r\n59.67<\/td>\r\n<\/tr>\r\n<\/tbody>\r\n<\/table>\r\n<\/div>\r\nThese values support finer load distribution in high-vibration environments.\r\n\r\n<\/div>\r\n
      \r\n

      Fine Pitch External Threads<\/h2>\r\nMedium precision, medium engagement, 6g tolerance zone. Provides stronger core sections for enhanced shear strength.\r\n
      \r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n
      Thread<\/th>\r\nEngagement Length<\/th>\r\nMajor Diameter d<\/th>\r\nPitch Diameter d2<\/sub><\/th>\r\nMin Root Radiusa<\/sup><\/th>\r\n<\/tr>\r\n
      ><\/th>\r\n\u2264<\/th>\r\nmax<\/th>\r\nmin<\/th>\r\nmax<\/th>\r\nmin<\/th>\r\nmin<\/th>\r\n<\/tr>\r\n<\/thead>\r\n
      M8\u00d71<\/td>\r\n3<\/td>\r\n9<\/td>\r\n7.974<\/td>\r\n7.794<\/td>\r\n7.324<\/td>\r\n7.212<\/td>\r\n0.125<\/td>\r\n<\/tr>\r\n
      M10\u00d71<\/td>\r\n4<\/td>\r\n12<\/td>\r\n9.974<\/td>\r\n9.794<\/td>\r\n9.324<\/td>\r\n9.212<\/td>\r\n0.125<\/td>\r\n<\/tr>\r\n
      M10\u00d71.25<\/td>\r\n4<\/td>\r\n12<\/td>\r\n9.972<\/td>\r\n9.76<\/td>\r\n9.16<\/td>\r\n9.042<\/td>\r\n0.156<\/td>\r\n<\/tr>\r\n
      M12\u00d71.25<\/td>\r\n4.5<\/td>\r\n13<\/td>\r\n11.972<\/td>\r\n11.76<\/td>\r\n11.16<\/td>\r\n11.028<\/td>\r\n0.156<\/td>\r\n<\/tr>\r\n
      M12\u00d71.5<\/td>\r\n4.5<\/td>\r\n13<\/td>\r\n11.968<\/td>\r\n11.732<\/td>\r\n10.994<\/td>\r\n10.854<\/td>\r\n0.188<\/td>\r\n<\/tr>\r\n
      M14\u00d71.5<\/td>\r\n5.6<\/td>\r\n16<\/td>\r\n13.968<\/td>\r\n13.732<\/td>\r\n12.994<\/td>\r\n12.854<\/td>\r\n0.188<\/td>\r\n<\/tr>\r\n
      M16\u00d71.5<\/td>\r\n5.6<\/td>\r\n16<\/td>\r\n15.968<\/td>\r\n15.732<\/td>\r\n14.994<\/td>\r\n14.854<\/td>\r\n0.188<\/td>\r\n<\/tr>\r\n
      M18\u00d71.5<\/td>\r\n5.6<\/td>\r\n16<\/td>\r\n17.968<\/td>\r\n17.732<\/td>\r\n16.994<\/td>\r\n16.854<\/td>\r\n0.188<\/td>\r\n<\/tr>\r\n
      M18\u00d72<\/td>\r\n5.6<\/td>\r\n16<\/td>\r\n17.962<\/td>\r\n17.682<\/td>\r\n16.663<\/td>\r\n16.503<\/td>\r\n0.25<\/td>\r\n<\/tr>\r\n
      M20\u00d71.5<\/td>\r\n5.6<\/td>\r\n16<\/td>\r\n19.968<\/td>\r\n19.732<\/td>\r\n18.994<\/td>\r\n18.854<\/td>\r\n0.188<\/td>\r\n<\/tr>\r\n
      M20\u00d72<\/td>\r\n5.6<\/td>\r\n16<\/td>\r\n19.962<\/td>\r\n19.682<\/td>\r\n18.663<\/td>\r\n18.503<\/td>\r\n0.25<\/td>\r\n<\/tr>\r\n
      M22\u00d71.5<\/td>\r\n5.6<\/td>\r\n16<\/td>\r\n21.968<\/td>\r\n21.732<\/td>\r\n20.994<\/td>\r\n20.854<\/td>\r\n0.188<\/td>\r\n<\/tr>\r\n
      M22\u00d72<\/td>\r\n5.6<\/td>\r\n16<\/td>\r\n21.962<\/td>\r\n21.682<\/td>\r\n20.663<\/td>\r\n20.503<\/td>\r\n0.25<\/td>\r\n<\/tr>\r\n
      M24\u00d72<\/td>\r\n8.5<\/td>\r\n25<\/td>\r\n23.962<\/td>\r\n23.682<\/td>\r\n22.663<\/td>\r\n22.493<\/td>\r\n0.25<\/td>\r\n<\/tr>\r\n
      M27\u00d72<\/td>\r\n8.5<\/td>\r\n25<\/td>\r\n26.962<\/td>\r\n26.682<\/td>\r\n25.663<\/td>\r\n25.493<\/td>\r\n0.25<\/td>\r\n<\/tr>\r\n
      M30\u00d72<\/td>\r\n8.5<\/td>\r\n25<\/td>\r\n29.962<\/td>\r\n29.682<\/td>\r\n28.663<\/td>\r\n28.493<\/td>\r\n0.25<\/td>\r\n<\/tr>\r\n
      M33\u00d72<\/td>\r\n8.5<\/td>\r\n25<\/td>\r\n32.962<\/td>\r\n32.682<\/td>\r\n31.663<\/td>\r\n31.493<\/td>\r\n0.25<\/td>\r\n<\/tr>\r\n
      M36\u00d73<\/td>\r\n12<\/td>\r\n36<\/td>\r\n35.952<\/td>\r\n35.577<\/td>\r\n34.003<\/td>\r\n33.803<\/td>\r\n0.375<\/td>\r\n<\/tr>\r\n
      M39\u00d73<\/td>\r\n12<\/td>\r\n36<\/td>\r\n38.952<\/td>\r\n38.577<\/td>\r\n37.003<\/td>\r\n36.803<\/td>\r\n0.375<\/td>\r\n<\/tr>\r\n
      M42\u00d73<\/td>\r\n12<\/td>\r\n36<\/td>\r\n41.952<\/td>\r\n41.577<\/td>\r\n40.003<\/td>\r\n39.803<\/td>\r\n0.375<\/td>\r\n<\/tr>\r\n
      M45\u00d73<\/td>\r\n12<\/td>\r\n36<\/td>\r\n44.952<\/td>\r\n44.577<\/td>\r\n43.003<\/td>\r\n42.803<\/td>\r\n0.375<\/td>\r\n<\/tr>\r\n
      M48\u00d73<\/td>\r\n15<\/td>\r\n45<\/td>\r\n47.952<\/td>\r\n47.577<\/td>\r\n46.003<\/td>\r\n45.791<\/td>\r\n0.375<\/td>\r\n<\/tr>\r\n
      M52\u00d74<\/td>\r\n19<\/td>\r\n56<\/td>\r\n51.94<\/td>\r\n51.465<\/td>\r\n49.342<\/td>\r\n49.106<\/td>\r\n0.5<\/td>\r\n<\/tr>\r\n
      M56\u00d74<\/td>\r\n19<\/td>\r\n56<\/td>\r\n55.94<\/td>\r\n55.465<\/td>\r\n53.342<\/td>\r\n53.106<\/td>\r\n0.5<\/td>\r\n<\/tr>\r\n
      M60\u00d74<\/td>\r\n19<\/td>\r\n56<\/td>\r\n59.94<\/td>\r\n59.465<\/td>\r\n57.342<\/td>\r\n57.106<\/td>\r\n0.5<\/td>\r\n<\/tr>\r\n
      M64\u00d74<\/td>\r\n19<\/td>\r\n56<\/td>\r\n63.94<\/td>\r\n63.465<\/td>\r\n61.342<\/td>\r\n61.106<\/td>\r\n0.5<\/td>\r\n<\/tr>\r\n<\/tbody>\r\n<\/table>\r\n<\/div>\r\na<\/sup> See GB\/T 197-2003 for root radius specifications, critical for avoiding stress concentrations.\r\n\r\n<\/div>\r\n
      \r\n

      FAQ<\/h2>\r\n

      What tolerance zones apply to coarse internal threads?<\/h3>\r\n5H for diameters \u22641.4 mm; 6H for >1.4 mm, ensuring medium precision fit.\r\n

      How does plating affect thread dimensions?<\/h3>\r\nTolerances are pre-plating; post-plating profiles must not exceed H\/h positions for thin coatings to maintain assembly.\r\n

      Why use fine pitch threads?<\/h3>\r\nThey provide better vibration resistance and finer adjustments, with stronger cores per limits in tables 3 and 4.\r\n

      What is medium engagement length?<\/h3>\r\nIt balances thread strength and cost; use table values for specific ranges to avoid over- or under-engagement.\r\n

      How to interpret root radius?<\/h3>\r\nMin values per GB\/T 197-2003 reduce stress; essential for fatigue-prone applications.\r\n

      Are these limits for all materials?<\/h3>\r\nYes, but adjust for special platings; consult standard for heavy coatings requiring oversized threads.\r\n\r\n<\/div>\r\n ","_et_gb_content_width":"","footnotes":""},"categories":[220],"tags":[],"class_list":["post-5757","post","type-post","status-publish","format-standard","hentry","category-technical-documentation-and-references"],"_links":{"self":[{"href":"https:\/\/korea-transmission.com\/ms\/wp-json\/wp\/v2\/posts\/5757","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/korea-transmission.com\/ms\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/korea-transmission.com\/ms\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/korea-transmission.com\/ms\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/korea-transmission.com\/ms\/wp-json\/wp\/v2\/comments?post=5757"}],"version-history":[{"count":3,"href":"https:\/\/korea-transmission.com\/ms\/wp-json\/wp\/v2\/posts\/5757\/revisions"}],"predecessor-version":[{"id":5760,"href":"https:\/\/korea-transmission.com\/ms\/wp-json\/wp\/v2\/posts\/5757\/revisions\/5760"}],"wp:attachment":[{"href":"https:\/\/korea-transmission.com\/ms\/wp-json\/wp\/v2\/media?parent=5757"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/korea-transmission.com\/ms\/wp-json\/wp\/v2\/categories?post=5757"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/korea-transmission.com\/ms\/wp-json\/wp\/v2\/tags?post=5757"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}