{"id":5717,"date":"2025-12-24T02:30:34","date_gmt":"2025-12-24T02:30:34","guid":{"rendered":"https:\/\/korea-transmission.com\/?p=5717"},"modified":"2025-12-24T02:30:34","modified_gmt":"2025-12-24T02:30:34","slug":"gb-t-3098-10-prevailing-torque-steel-lock-nuts-standard","status":"publish","type":"post","link":"https:\/\/korea-transmission.com\/fr\/blog\/gb-t-3098-10-prevailing-torque-steel-lock-nuts-standard\/","title":{"rendered":"Norme GB\/T 3098.10 relative au couple de serrage des \u00e9crous de blocage en acier"},"content":{"rendered":"
\n

Introduction \u00e0 la norme GB\/T 3098.10<\/h2>\n

Cette norme sp\u00e9cifie les propri\u00e9t\u00e9s m\u00e9caniques des \u00e9crous autobloquants en acier \u00e0 couple de serrage courant, garantissant leur r\u00e9sistance aux vibrations lors des applications de fixation. Elle est conforme \u00e0 la norme ISO 2320:2015 pour les m\u00e9thodes d'essai et couvre les classes 04, 05, 5, 6, 8 et 10. Une s\u00e9lection et des essais appropri\u00e9s pr\u00e9servent l'int\u00e9grit\u00e9 de l'assemblage sous charges dynamiques.<\/p>\n<\/div>\n

\n

Port\u00e9e<\/h2>\n

La norme GB\/T 3098.10-1993 d\u00e9finit les exigences de performance des \u00e9crous autobloquants en acier avec couple de serrage maximal, applicables aux tailles M5 \u00e0 M39, \u00e0 pas fin et \u00e0 gros pas. Elle inclut des essais de forces de serrage et de couples de serrage maximal pour v\u00e9rifier l'efficacit\u00e9 du blocage et convient aux secteurs industriels tels que l'automobile et la m\u00e9canique o\u00f9 la pr\u00e9vention du desserrage est essentielle.<\/p>\n

    \n
  • S'applique aux \u00e9crous de blocage \u00e0 insert enti\u00e8rement m\u00e9talliques et non m\u00e9talliques.<\/li>\n
  • Assure un couple constant apr\u00e8s plusieurs installations\/d\u00e9montages.<\/li>\n
  • R\u00e9f\u00e9rences \u00e0 la norme ISO 898-2 pour les charges d'\u00e9preuve et les coefficients de frottement.<\/li>\n<\/ul>\n<\/div>\n
    \n

    M\u00e9thodes d'essai et exigences<\/h2>\n

    Les essais \u00e9valuent la force de serrage sous des charges sp\u00e9cifi\u00e9es et mesurent le couple effectif lors des cycles d'installation et de d\u00e9montage. La force de serrage est de 80% (charge d'\u00e9preuve de l'\u00e9crou), avec des limites \u00e0 75% et 65% pour l'\u00e9valuation du frottement. L'\u00e9valuation est r\u00e9alis\u00e9e par contr\u00f4le statistique des processus, ind\u00e9pendamment des statistiques.<\/p>\n

      \n
    1. Appliquer la force de serrage d'essai F80<\/sub>.<\/li>\n
    2. Mesurer le couple pour la 1\u00e8re installation (max pour tout m\u00e9tal ; 50% pour les inserts).<\/li>\n
    3. \u00c9valuer les couples de retrait 1 et 5 (valeurs minimales).<\/li>\n<\/ol>\n

      Ces dispositifs permettent aux \u00e9crous de rester bloqu\u00e9s sans frottement excessif ni dommage.<\/p>\n<\/div>\n

      \n

      \u00c9crous de couple pr\u00e9pond\u00e9rant de classe 04<\/h2>\n

      Pour les \u00e9crous de classe 04 (5 mm \u2264 d \u2264 39 mm), la force de serrage est \u00e9gale \u00e0 la charge d'\u00e9preuve 80% selon la norme ISO 898-2. Les limites \u00e9valuent le coefficient de frottement total \u03bctout-petit<\/sub>.<\/p>\n

      \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
      Taille du fil<\/th>\nForce de serrage d'essai F80<\/sub> \/ N<\/th>\nLimite sup\u00e9rieure F75<\/sub> \/ N<\/th>\nLimite inf\u00e9rieure F65<\/sub> \/ N<\/th>\n1\u00e8re installation TFV,max<\/sub> \/ (N\u00b7m)<\/th>\n1er retrait TFd,min<\/sub> \/ (N\u00b7m)<\/th>\n5\u00e8me retrait TFd,min<\/sub> \/ (N\u00b7m)<\/th>\n<\/tr>\n<\/thead>\n
      M5<\/td>\n4320<\/td>\n4050<\/td>\n3510<\/td>\n1.6<\/td>\n0.29<\/td>\n0.2<\/td>\n<\/tr>\n
      M6<\/td>\n6112<\/td>\n5730<\/td>\n4966<\/td>\n3<\/td>\n0.45<\/td>\n0.3<\/td>\n<\/tr>\n
      M7<\/td>\n8800<\/td>\n8250<\/td>\n7150<\/td>\n4.5<\/td>\n0.65<\/td>\n0.45<\/td>\n<\/tr>\n
      M8<\/td>\n11120<\/td>\n10425<\/td>\n9035<\/td>\n6<\/td>\n0.85<\/td>\n0.6<\/td>\n<\/tr>\n
      M8X1<\/td>\n11920<\/td>\n11175<\/td>\n9685<\/td>\n6<\/td>\n0.85<\/td>\n0.6<\/td>\n<\/tr>\n
      M10<\/td>\n17600<\/td>\n16500<\/td>\n14300<\/td>\n10.5<\/td>\n1.5<\/td>\n1<\/td>\n<\/tr>\n
      M10X1,25<\/td>\n18640<\/td>\n17475<\/td>\n15145<\/td>\n10.5<\/td>\n1.5<\/td>\n1<\/td>\n<\/tr>\n
      M10X1<\/td>\n19600<\/td>\n18375<\/td>\n15925<\/td>\n10.5<\/td>\n1.5<\/td>\n1<\/td>\n<\/tr>\n
      M12<\/td>\n25600<\/td>\n24000<\/td>\n20800<\/td>\n15.5<\/td>\n2.3<\/td>\n1.6<\/td>\n<\/tr>\n
      M12X1.5<\/td>\n26800<\/td>\n25125<\/td>\n21775<\/td>\n15.5<\/td>\n2.3<\/td>\n1.6<\/td>\n<\/tr>\n
      M12X1,25<\/td>\n28000<\/td>\n26250<\/td>\n22750<\/td>\n15.5<\/td>\n2.3<\/td>\n1.6<\/td>\n<\/tr>\n
      M14<\/td>\n34960<\/td>\n32775<\/td>\n28405<\/td>\n24<\/td>\n3.3<\/td>\n2.3<\/td>\n<\/tr>\n
      M14X1,5<\/td>\n38000<\/td>\n35625<\/td>\n30875<\/td>\n24<\/td>\n3.3<\/td>\n2.3<\/td>\n<\/tr>\n
      M16<\/td>\n47760<\/td>\n44775<\/td>\n38805<\/td>\n32<\/td>\n4.5<\/td>\n3<\/td>\n<\/tr>\n
      M16X1,5<\/td>\n50800<\/td>\n47625<\/td>\n41275<\/td>\n32<\/td>\n4.5<\/td>\n3<\/td>\n<\/tr>\n
      M18<\/td>\n58400<\/td>\n54750<\/td>\n47450<\/td>\n42<\/td>\n6<\/td>\n4.2<\/td>\n<\/tr>\n
      M18X1.5<\/td>\n65360<\/td>\n61275<\/td>\n53105<\/td>\n42<\/td>\n6<\/td>\n4.2<\/td>\n<\/tr>\n
      M20<\/td>\n74480<\/td>\n69825<\/td>\n60515<\/td>\n54<\/td>\n7.5<\/td>\n5.3<\/td>\n<\/tr>\n
      M20X1.5<\/td>\n82720<\/td>\n77550<\/td>\n67210<\/td>\n54<\/td>\n7.5<\/td>\n5.3<\/td>\n<\/tr>\n
      M22<\/td>\n92080<\/td>\n86325<\/td>\n74815<\/td>\n68<\/td>\n9.5<\/td>\n6.5<\/td>\n<\/tr>\n
      M22X1.5<\/td>\n101200<\/td>\n94875<\/td>\n82225<\/td>\n68<\/td>\n9.5<\/td>\n6.5<\/td>\n<\/tr>\n
      M24<\/td>\n107280<\/td>\n100575<\/td>\n87165<\/td>\n80<\/td>\n11.5<\/td>\n8<\/td>\n<\/tr>\n
      M24X2<\/td>\n116720<\/td>\n109425<\/td>\n94835<\/td>\n80<\/td>\n11.5<\/td>\n8<\/td>\n<\/tr>\n
      M27<\/td>\n139520<\/td>\n130800<\/td>\n113360<\/td>\n94<\/td>\n13.5<\/td>\n10<\/td>\n<\/tr>\n
      M27X2<\/td>\n150800<\/td>\n141375<\/td>\n122525<\/td>\n94<\/td>\n13.5<\/td>\n10<\/td>\n<\/tr>\n
      M30<\/td>\n170560<\/td>\n159900<\/td>\n138580<\/td>\n108<\/td>\n16<\/td>\n12<\/td>\n<\/tr>\n
      M30X2<\/td>\n188800<\/td>\n177000<\/td>\n153400<\/td>\n108<\/td>\n16<\/td>\n12<\/td>\n<\/tr>\n
      M33<\/td>\n210960<\/td>\n197775<\/td>\n171405<\/td>\n122<\/td>\n18<\/td>\n14<\/td>\n<\/tr>\n
      M33X2<\/td>\n231360<\/td>\n216900<\/td>\n187980<\/td>\n122<\/td>\n18<\/td>\n14<\/td>\n<\/tr>\n
      M36<\/td>\n248400<\/td>\n232875<\/td>\n201825<\/td>\n136<\/td>\n21<\/td>\n16<\/td>\n<\/tr>\n
      M36X3<\/td>\n262960<\/td>\n246525<\/td>\n213655<\/td>\n136<\/td>\n21<\/td>\n16<\/td>\n<\/tr>\n
      M39<\/td>\n296720<\/td>\n278175<\/td>\n241085<\/td>\n150<\/td>\n23<\/td>\n18<\/td>\n<\/tr>\n
      M39X3<\/td>\n313120<\/td>\n293550<\/td>\n254410<\/td>\n150<\/td>\n23<\/td>\n18<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

      Remarque : le couple de premi\u00e8re installation s'applique aux \u00e9crous enti\u00e8rement m\u00e9talliques ; pour les inserts non m\u00e9talliques, la valeur maximale est de 50%.<\/p>\n<\/div>\n

      \n

      \u00c9crous de couple pr\u00e9dominant de classe 05<\/h2>\n

      Les \u00e9crous de classe 05 utilisent une charge d'\u00e9preuve 80% selon la norme ISO 898-2 pour le serrage, avec des limites de friction pour la v\u00e9rification des performances.<\/p>\n

      \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
      Taille du fil<\/th>\nForce de serrage d'essai F80<\/sub> \/ N<\/th>\nLimite sup\u00e9rieure F75<\/sub> \/ N<\/th>\nLimite inf\u00e9rieure F65<\/sub> \/ N<\/th>\n1\u00e8re installation TFV,max<\/sub> \/ (N\u00b7m)<\/th>\n1er retrait TFd,min<\/sub> \/ (N\u00b7m)<\/th>\n5\u00e8me retrait TFd,min<\/sub> \/ (N\u00b7m)<\/th>\n<\/tr>\n<\/thead>\n
      M5<\/td>\n5680<\/td>\n5325<\/td>\n4615<\/td>\n2.1<\/td>\n0.35<\/td>\n0.24<\/td>\n<\/tr>\n
      M6<\/td>\n8000<\/td>\n7500<\/td>\n6500<\/td>\n4<\/td>\n0.55<\/td>\n0.4<\/td>\n<\/tr>\n
      M7<\/td>\n11600<\/td>\n10875<\/td>\n9425<\/td>\n6<\/td>\n0.85<\/td>\n0.6<\/td>\n<\/tr>\n
      M8<\/td>\n14640<\/td>\n13725<\/td>\n11895<\/td>\n8<\/td>\n1.15<\/td>\n0.8<\/td>\n<\/tr>\n
      M8X1<\/td>\n15680<\/td>\n14700<\/td>\n12740<\/td>\n8<\/td>\n1.15<\/td>\n0.8<\/td>\n<\/tr>\n
      M10<\/td>\n23200<\/td>\n21750<\/td>\n18850<\/td>\n14<\/td>\n2<\/td>\n1.4<\/td>\n<\/tr>\n
      M10X1,25<\/td>\n24480<\/td>\n22950<\/td>\n19890<\/td>\n14<\/td>\n2<\/td>\n1.4<\/td>\n<\/tr>\n
      M10X1<\/td>\n25760<\/td>\n24150<\/td>\n20930<\/td>\n14<\/td>\n2<\/td>\n1.4<\/td>\n<\/tr>\n
      M12<\/td>\n33760<\/td>\n31650<\/td>\n27430<\/td>\n21<\/td>\n3.1<\/td>\n2.1<\/td>\n<\/tr>\n
      M12X1.5<\/td>\n35200<\/td>\n33000<\/td>\n28600<\/td>\n21<\/td>\n3.1<\/td>\n2.1<\/td>\n<\/tr>\n
      M12X1,25<\/td>\n36800<\/td>\n34500<\/td>\n29900<\/td>\n21<\/td>\n3.1<\/td>\n2.1<\/td>\n<\/tr>\n
      M14<\/td>\n46000<\/td>\n43125<\/td>\n37375<\/td>\n31<\/td>\n4.4<\/td>\n3<\/td>\n<\/tr>\n
      M14X1,5<\/td>\n50000<\/td>\n46875<\/td>\n40625<\/td>\n31<\/td>\n4.4<\/td>\n3<\/td>\n<\/tr>\n
      M16<\/td>\n62800<\/td>\n58875<\/td>\n51025<\/td>\n42<\/td>\n6<\/td>\n4.2<\/td>\n<\/tr>\n
      M16X1,5<\/td>\n66800<\/td>\n62625<\/td>\n54275<\/td>\n42<\/td>\n6<\/td>\n4.2<\/td>\n<\/tr>\n
      M18<\/td>\n76800<\/td>\n72000<\/td>\n62400<\/td>\n56<\/td>\n8<\/td>\n5.5<\/td>\n<\/tr>\n
      M18X1.5<\/td>\n86000<\/td>\n80625<\/td>\n69875<\/td>\n56<\/td>\n8<\/td>\n5.5<\/td>\n<\/tr>\n
      M20<\/td>\n98000<\/td>\n91875<\/td>\n79625<\/td>\n72<\/td>\n10.5<\/td>\n7<\/td>\n<\/tr>\n
      M20X1.5<\/td>\n108800<\/td>\n102000<\/td>\n88400<\/td>\n72<\/td>\n10.5<\/td>\n7<\/td>\n<\/tr>\n
      M22<\/td>\n121200<\/td>\n113625<\/td>\n98475<\/td>\n90<\/td>\n13<\/td>\n9<\/td>\n<\/tr>\n
      M22X1.5<\/td>\n133200<\/td>\n124875<\/td>\n108225<\/td>\n90<\/td>\n13<\/td>\n9<\/td>\n<\/tr>\n
      M24<\/td>\n141200<\/td>\n132375<\/td>\n114725<\/td>\n106<\/td>\n15<\/td>\n10.5<\/td>\n<\/tr>\n
      M24X2<\/td>\n153600<\/td>\n144000<\/td>\n124800<\/td>\n106<\/td>\n15<\/td>\n10.5<\/td>\n<\/tr>\n
      M27<\/td>\n183600<\/td>\n172125<\/td>\n149175<\/td>\n123<\/td>\n17<\/td>\n12<\/td>\n<\/tr>\n
      M27X2<\/td>\n198400<\/td>\n186000<\/td>\n161200<\/td>\n123<\/td>\n17<\/td>\n12<\/td>\n<\/tr>\n
      M30<\/td>\n224400<\/td>\n210375<\/td>\n182325<\/td>\n140<\/td>\n19<\/td>\n14<\/td>\n<\/tr>\n
      M30X2<\/td>\n248400<\/td>\n232875<\/td>\n201825<\/td>\n140<\/td>\n19<\/td>\n14<\/td>\n<\/tr>\n
      M33<\/td>\n277600<\/td>\n260250<\/td>\n225550<\/td>\n160<\/td>\n21.5<\/td>\n15.5<\/td>\n<\/tr>\n
      M33X2<\/td>\n304400<\/td>\n285375<\/td>\n247325<\/td>\n160<\/td>\n21.5<\/td>\n15.5<\/td>\n<\/tr>\n
      M36<\/td>\n326800<\/td>\n306375<\/td>\n265525<\/td>\n180<\/td>\n24<\/td>\n17.5<\/td>\n<\/tr>\n
      M36X3<\/td>\n346000<\/td>\n324375<\/td>\n281125<\/td>\n180<\/td>\n24<\/td>\n17.5<\/td>\n<\/tr>\n
      M39<\/td>\n390400<\/td>\n366000<\/td>\n317200<\/td>\n200<\/td>\n26.5<\/td>\n19.5<\/td>\n<\/tr>\n
      M39X3<\/td>\n412000<\/td>\n386250<\/td>\n334750<\/td>\n200<\/td>\n26.5<\/td>\n19.5<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

      Remarque : Le couple d'installation des inserts est de 50% maximum des valeurs indiqu\u00e9es.<\/p>\n<\/div>\n

      \n

      \u00c9crous de couple pr\u00e9dominant de classe 5<\/h2>\n

      La classe 5 correspond \u00e0 la classe de boulon 5.8 selon la norme ISO 898-1, en utilisant la charge d'\u00e9preuve 80% pour les tests.<\/p>\n

      \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
      Taille du fil<\/th>\nForce de serrage d'essai F80<\/sub> \/ N<\/th>\nLimite sup\u00e9rieure F75<\/sub> \/ N<\/th>\nLimite inf\u00e9rieure F65<\/sub> \/ N<\/th>\n1\u00e8re installation TFV,max<\/sub> \/ (N\u00b7m)<\/th>\n1er retrait TFd,min<\/sub> \/ (N\u00b7m)<\/th>\n5\u00e8me retrait TFd,min<\/sub> \/ (N\u00b7m)<\/th>\n<\/tr>\n<\/thead>\n
      M5<\/td>\n4320<\/td>\n4050<\/td>\n3510<\/td>\n1.6<\/td>\n0.29<\/td>\n0.2<\/td>\n<\/tr>\n
      M6<\/td>\n6112<\/td>\n5730<\/td>\n4966<\/td>\n3<\/td>\n0.45<\/td>\n0.3<\/td>\n<\/tr>\n
      M7<\/td>\n8800<\/td>\n8250<\/td>\n7150<\/td>\n4.5<\/td>\n0.65<\/td>\n0.45<\/td>\n<\/tr>\n
      M8<\/td>\n11120<\/td>\n10425<\/td>\n9035<\/td>\n6<\/td>\n0.85<\/td>\n0.6<\/td>\n<\/tr>\n
      M8X1<\/td>\n11920<\/td>\n11175<\/td>\n9685<\/td>\n6<\/td>\n0.85<\/td>\n0.6<\/td>\n<\/tr>\n
      M10<\/td>\n17600<\/td>\n16500<\/td>\n14300<\/td>\n10.5<\/td>\n1.5<\/td>\n1<\/td>\n<\/tr>\n
      M10X1,25<\/td>\n18640<\/td>\n17475<\/td>\n15145<\/td>\n10.5<\/td>\n1.5<\/td>\n1<\/td>\n<\/tr>\n
      M10X1<\/td>\n19600<\/td>\n18375<\/td>\n15925<\/td>\n10.5<\/td>\n1.5<\/td>\n1<\/td>\n<\/tr>\n
      M12<\/td>\n25600<\/td>\n24000<\/td>\n20800<\/td>\n15.5<\/td>\n2.3<\/td>\n1.6<\/td>\n<\/tr>\n
      M12X1.5<\/td>\n26800<\/td>\n25125<\/td>\n21775<\/td>\n15.5<\/td>\n2.3<\/td>\n1.6<\/td>\n<\/tr>\n
      M12X1,25<\/td>\n28000<\/td>\n26250<\/td>\n22750<\/td>\n15.5<\/td>\n2.3<\/td>\n1.6<\/td>\n<\/tr>\n
      M14<\/td>\n34960<\/td>\n32775<\/td>\n28405<\/td>\n24<\/td>\n3.3<\/td>\n2.3<\/td>\n<\/tr>\n
      M14X1,5<\/td>\n38000<\/td>\n35625<\/td>\n30875<\/td>\n24<\/td>\n3.3<\/td>\n2.3<\/td>\n<\/tr>\n
      M16<\/td>\n47760<\/td>\n44775<\/td>\n38805<\/td>\n32<\/td>\n4.5<\/td>\n3<\/td>\n<\/tr>\n
      M16X1,5<\/td>\n50800<\/td>\n47625<\/td>\n41275<\/td>\n32<\/td>\n4.5<\/td>\n3<\/td>\n<\/tr>\n
      M18<\/td>\n58400<\/td>\n54750<\/td>\n47450<\/td>\n42<\/td>\n6<\/td>\n4.2<\/td>\n<\/tr>\n
      M18X1.5<\/td>\n65680<\/td>\n61575<\/td>\n53365<\/td>\n42<\/td>\n6<\/td>\n4.2<\/td>\n<\/tr>\n
      M20<\/td>\n74480<\/td>\n69825<\/td>\n60515<\/td>\n54<\/td>\n7.5<\/td>\n5.3<\/td>\n<\/tr>\n
      M20X1.5<\/td>\n82400<\/td>\n77250<\/td>\n66950<\/td>\n54<\/td>\n7.5<\/td>\n5.3<\/td>\n<\/tr>\n
      M22<\/td>\n92000<\/td>\n86250<\/td>\n74750<\/td>\n68<\/td>\n9.5<\/td>\n6.5<\/td>\n<\/tr>\n
      M22X1.5<\/td>\n100800<\/td>\n94500<\/td>\n81900<\/td>\n68<\/td>\n9.5<\/td>\n6.5<\/td>\n<\/tr>\n
      M24<\/td>\n107200<\/td>\n100500<\/td>\n87100<\/td>\n80<\/td>\n11.5<\/td>\n8<\/td>\n<\/tr>\n
      M24X2<\/td>\n116800<\/td>\n109500<\/td>\n94900<\/td>\n80<\/td>\n11.5<\/td>\n8<\/td>\n<\/tr>\n
      M27<\/td>\n113600<\/td>\n106500<\/td>\n92300<\/td>\n94<\/td>\n13.5<\/td>\n10<\/td>\n<\/tr>\n
      M27X2<\/td>\n123200<\/td>\n115500<\/td>\n100100<\/td>\n94<\/td>\n13.5<\/td>\n10<\/td>\n<\/tr>\n
      M30<\/td>\n139200<\/td>\n130500<\/td>\n113100<\/td>\n108<\/td>\n16<\/td>\n12<\/td>\n<\/tr>\n
      M30X2<\/td>\n153600<\/td>\n144000<\/td>\n124800<\/td>\n108<\/td>\n16<\/td>\n12<\/td>\n<\/tr>\n
      M33<\/td>\n172000<\/td>\n161250<\/td>\n139750<\/td>\n122<\/td>\n18<\/td>\n14<\/td>\n<\/tr>\n
      M33X2<\/td>\n188800<\/td>\n177000<\/td>\n153400<\/td>\n122<\/td>\n18<\/td>\n14<\/td>\n<\/tr>\n
      M36<\/td>\n202400<\/td>\n189750<\/td>\n164450<\/td>\n136<\/td>\n21<\/td>\n16<\/td>\n<\/tr>\n
      M36X3<\/td>\n214400<\/td>\n201000<\/td>\n174200<\/td>\n136<\/td>\n21<\/td>\n16<\/td>\n<\/tr>\n
      M39<\/td>\n242400<\/td>\n227250<\/td>\n196950<\/td>\n150<\/td>\n23<\/td>\n18<\/td>\n<\/tr>\n
      M39X3<\/td>\n255200<\/td>\n239250<\/td>\n207350<\/td>\n150<\/td>\n23<\/td>\n18<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

      Remarque : La force de serrage est \u00e9gale \u00e0 la charge d'\u00e9preuve du boulon 80% de classe 5.8 selon la norme ISO 898-1.<\/p>\n<\/div>\n

      \n

      \u00c9crous de couple pr\u00e9pond\u00e9rants de classe 6<\/h2>\n

      La classe 6 correspond \u00e0 la classe de boulon 6.8, avec une charge d'\u00e9preuve 80% pour les essais de serrage.<\/p>\n

      \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
      Taille du fil<\/th>\nForce de serrage d'essai F80<\/sub> \/ N<\/th>\nLimite sup\u00e9rieure F75<\/sub> \/ N<\/th>\nLimite inf\u00e9rieure F65<\/sub> \/ N<\/th>\n1\u00e8re installation TFV,max<\/sub> \/ (N\u00b7m)<\/th>\n1er retrait TFd,min<\/sub> \/ (N\u00b7m)<\/th>\n5\u00e8me retrait TFd,min<\/sub> \/ (N\u00b7m)<\/th>\n<\/tr>\n<\/thead>\n
      M5<\/td>\n5000<\/td>\n4688<\/td>\n4063<\/td>\n1.6<\/td>\n0.29<\/td>\n0.2<\/td>\n<\/tr>\n
      M6<\/td>\n7072<\/td>\n6630<\/td>\n5746<\/td>\n3<\/td>\n0.45<\/td>\n0.3<\/td>\n<\/tr>\n
      M7<\/td>\n10160<\/td>\n9525<\/td>\n8255<\/td>\n4.5<\/td>\n0.65<\/td>\n0.45<\/td>\n<\/tr>\n
      M8<\/td>\n12880<\/td>\n12075<\/td>\n10465<\/td>\n6<\/td>\n0.85<\/td>\n0.6<\/td>\n<\/tr>\n
      M8X1<\/td>\n13760<\/td>\n12900<\/td>\n11180<\/td>\n6<\/td>\n0.85<\/td>\n0.6<\/td>\n<\/tr>\n
      M10<\/td>\n20400<\/td>\n19125<\/td>\n16575<\/td>\n10.5<\/td>\n1.5<\/td>\n1<\/td>\n<\/tr>\n
      M10X1,25<\/td>\n21520<\/td>\n20175<\/td>\n17485<\/td>\n10.5<\/td>\n1.5<\/td>\n1<\/td>\n<\/tr>\n
      M10X1<\/td>\n22720<\/td>\n21300<\/td>\n18460<\/td>\n10.5<\/td>\n1.5<\/td>\n1<\/td>\n<\/tr>\n
      M12<\/td>\n29680<\/td>\n27825<\/td>\n24115<\/td>\n15.5<\/td>\n2.3<\/td>\n1.6<\/td>\n<\/tr>\n
      M12X1.5<\/td>\n31040<\/td>\n29100<\/td>\n25220<\/td>\n15.5<\/td>\n2.3<\/td>\n1.6<\/td>\n<\/tr>\n
      M12X1,25<\/td>\n32400<\/td>\n30375<\/td>\n26325<\/td>\n15.5<\/td>\n2.3<\/td>\n1.6<\/td>\n<\/tr>\n
      M14<\/td>\n40480<\/td>\n37950<\/td>\n32890<\/td>\n24<\/td>\n3.3<\/td>\n2.3<\/td>\n<\/tr>\n
      M14X1,5<\/td>\n44000<\/td>\n41250<\/td>\n35750<\/td>\n24<\/td>\n3.3<\/td>\n2.3<\/td>\n<\/tr>\n
      M16<\/td>\n55280<\/td>\n51825<\/td>\n44915<\/td>\n32<\/td>\n4.5<\/td>\n3<\/td>\n<\/tr>\n
      M16X1,5<\/td>\n58800<\/td>\n55125<\/td>\n47775<\/td>\n32<\/td>\n4.5<\/td>\n3<\/td>\n<\/tr>\n
      M18<\/td>\n67600<\/td>\n63375<\/td>\n54925<\/td>\n42<\/td>\n6<\/td>\n4.2<\/td>\n<\/tr>\n
      M18X1.5<\/td>\n76000<\/td>\n71250<\/td>\n61750<\/td>\n42<\/td>\n6<\/td>\n4.2<\/td>\n<\/tr>\n
      M20<\/td>\n86400<\/td>\n81000<\/td>\n70200<\/td>\n54<\/td>\n7.5<\/td>\n5.3<\/td>\n<\/tr>\n
      M20X1.5<\/td>\n96000<\/td>\n90000<\/td>\n78000<\/td>\n54<\/td>\n7.5<\/td>\n5.3<\/td>\n<\/tr>\n
      M22<\/td>\n106400<\/td>\n99750<\/td>\n86450<\/td>\n68<\/td>\n9.5<\/td>\n6.5<\/td>\n<\/tr>\n
      M22X1.5<\/td>\n116800<\/td>\n109500<\/td>\n94900<\/td>\n68<\/td>\n9.5<\/td>\n6.5<\/td>\n<\/tr>\n
      M24<\/td>\n124000<\/td>\n116250<\/td>\n100750<\/td>\n80<\/td>\n11.5<\/td>\n8<\/td>\n<\/tr>\n
      M24X2<\/td>\n135200<\/td>\n126750<\/td>\n109850<\/td>\n80<\/td>\n11.5<\/td>\n8<\/td>\n<\/tr>\n
      M27<\/td>\n161600<\/td>\n151500<\/td>\n131300<\/td>\n94<\/td>\n13.5<\/td>\n10<\/td>\n<\/tr>\n
      M27X2<\/td>\n174400<\/td>\n163500<\/td>\n141700<\/td>\n94<\/td>\n13.5<\/td>\n10<\/td>\n<\/tr>\n
      M30<\/td>\n197600<\/td>\n185250<\/td>\n160550<\/td>\n108<\/td>\n16<\/td>\n12<\/td>\n<\/tr>\n
      M30X2<\/td>\n218400<\/td>\n204750<\/td>\n177450<\/td>\n108<\/td>\n16<\/td>\n12<\/td>\n<\/tr>\n
      M33<\/td>\n244000<\/td>\n228750<\/td>\n198250<\/td>\n122<\/td>\n18<\/td>\n14<\/td>\n<\/tr>\n
      M33X2<\/td>\n268000<\/td>\n251250<\/td>\n217750<\/td>\n122<\/td>\n18<\/td>\n14<\/td>\n<\/tr>\n
      M36<\/td>\n287200<\/td>\n269250<\/td>\n233350<\/td>\n136<\/td>\n21<\/td>\n16<\/td>\n<\/tr>\n
      M36X3<\/td>\n304800<\/td>\n285750<\/td>\n247650<\/td>\n136<\/td>\n21<\/td>\n16<\/td>\n<\/tr>\n
      M39<\/td>\n343200<\/td>\n321750<\/td>\n278850<\/td>\n150<\/td>\n23<\/td>\n18<\/td>\n<\/tr>\n
      M39X3<\/td>\n362400<\/td>\n339750<\/td>\n294450<\/td>\n150<\/td>\n23<\/td>\n18<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

      Remarque : La force de serrage est \u00e9gale \u00e0 la charge d'\u00e9preuve du boulon 80% de classe 6.8 selon la norme ISO 898-1.<\/p>\n<\/div>\n

      \n

      \u00c9crous de couple pr\u00e9pond\u00e9rants de classe 8<\/h2>\n

      Pour la classe 8, le serrage est 80% de classe 8.8 charge d'\u00e9preuve de boulon selon GB\/T 3098.1.<\/p>\n

      \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
      Taille du fil<\/th>\nForce de serrage d'essai F80<\/sub> \/ N<\/th>\nLimite sup\u00e9rieure F75<\/sub> \/ N<\/th>\nLimite inf\u00e9rieure F65<\/sub> \/ N<\/th>\n1\u00e8re installation TFV,max<\/sub> \/ (N\u00b7m)<\/th>\n1er retrait TFd,min<\/sub> \/ (N\u00b7m)<\/th>\n5\u00e8me retrait TFd,min<\/sub> \/ (N\u00b7m)<\/th>\n<\/tr>\n<\/thead>\n
      M5<\/td>\n6584<\/td>\n6173<\/td>\n5350<\/td>\n1.6<\/td>\n0.29<\/td>\n0.2<\/td>\n<\/tr>\n
      M6<\/td>\n9280<\/td>\n8700<\/td>\n7540<\/td>\n3<\/td>\n0.45<\/td>\n0.3<\/td>\n<\/tr>\n
      M7<\/td>\n13440<\/td>\n12600<\/td>\n10920<\/td>\n4.5<\/td>\n0.65<\/td>\n0.45<\/td>\n<\/tr>\n
      M8<\/td>\n16960<\/td>\n15900<\/td>\n13780<\/td>\n6<\/td>\n0.85<\/td>\n0.6<\/td>\n<\/tr>\n
      M8X1<\/td>\n18160<\/td>\n17025<\/td>\n14755<\/td>\n6<\/td>\n0.85<\/td>\n0.6<\/td>\n<\/tr>\n
      M10<\/td>\n26960<\/td>\n25275<\/td>\n21905<\/td>\n10.5<\/td>\n1.5<\/td>\n1<\/td>\n<\/tr>\n
      M10X1,25<\/td>\n28400<\/td>\n26625<\/td>\n23075<\/td>\n10.5<\/td>\n1.5<\/td>\n1<\/td>\n<\/tr>\n
      M10X1<\/td>\n29920<\/td>\n28050<\/td>\n24310<\/td>\n10.5<\/td>\n1.5<\/td>\n1<\/td>\n<\/tr>\n
      M12<\/td>\n39120<\/td>\n36675<\/td>\n31785<\/td>\n15.5<\/td>\n2.3<\/td>\n1.6<\/td>\n<\/tr>\n
      M12X1.5<\/td>\n40880<\/td>\n38325<\/td>\n33215<\/td>\n15.5<\/td>\n2.3<\/td>\n1.6<\/td>\n<\/tr>\n
      M12X1,25<\/td>\n42720<\/td>\n40050<\/td>\n34710<\/td>\n15.5<\/td>\n2.3<\/td>\n1.6<\/td>\n<\/tr>\n
      M14<\/td>\n53360<\/td>\n50025<\/td>\n43355<\/td>\n24<\/td>\n3.3<\/td>\n2.3<\/td>\n<\/tr>\n
      M14X1,5<\/td>\n58000<\/td>\n54375<\/td>\n47125<\/td>\n24<\/td>\n3.3<\/td>\n2.3<\/td>\n<\/tr>\n
      M16<\/td>\n72800<\/td>\n68250<\/td>\n59150<\/td>\n32<\/td>\n4.5<\/td>\n3<\/td>\n<\/tr>\n
      M16X1,5<\/td>\n77520<\/td>\n72675<\/td>\n62985<\/td>\n32<\/td>\n4.5<\/td>\n3<\/td>\n<\/tr>\n
      M18<\/td>\n92000<\/td>\n86250<\/td>\n74750<\/td>\n42<\/td>\n6<\/td>\n4.2<\/td>\n<\/tr>\n
      M18X1.5<\/td>\n104000<\/td>\n97500<\/td>\n84500<\/td>\n42<\/td>\n6<\/td>\n4.2<\/td>\n<\/tr>\n
      M20<\/td>\n117600<\/td>\n110250<\/td>\n95550<\/td>\n54<\/td>\n7.5<\/td>\n5.3<\/td>\n<\/tr>\n
      M20X1.5<\/td>\n130400<\/td>\n122250<\/td>\n105950<\/td>\n54<\/td>\n7.5<\/td>\n5.3<\/td>\n<\/tr>\n
      M22<\/td>\n145600<\/td>\n136500<\/td>\n118300<\/td>\n68<\/td>\n9.5<\/td>\n6.5<\/td>\n<\/tr>\n
      M22X1.5<\/td>\n160000<\/td>\n150000<\/td>\n130000<\/td>\n68<\/td>\n9.5<\/td>\n6.5<\/td>\n<\/tr>\n
      M24<\/td>\n169600<\/td>\n159000<\/td>\n137800<\/td>\n80<\/td>\n11.5<\/td>\n8<\/td>\n<\/tr>\n
      M24X2<\/td>\n184000<\/td>\n172500<\/td>\n149500<\/td>\n80<\/td>\n11.5<\/td>\n8<\/td>\n<\/tr>\n
      M27<\/td>\n220000<\/td>\n206250<\/td>\n178750<\/td>\n94<\/td>\n13.5<\/td>\n10<\/td>\n<\/tr>\n
      M27X2<\/td>\n238400<\/td>\n223500<\/td>\n193700<\/td>\n94<\/td>\n13.5<\/td>\n10<\/td>\n<\/tr>\n
      M30<\/td>\n269600<\/td>\n252750<\/td>\n219050<\/td>\n108<\/td>\n16<\/td>\n12<\/td>\n<\/tr>\n
      M30X2<\/td>\n298400<\/td>\n279750<\/td>\n242450<\/td>\n108<\/td>\n16<\/td>\n12<\/td>\n<\/tr>\n
      M33<\/td>\n332800<\/td>\n312000<\/td>\n270400<\/td>\n122<\/td>\n18<\/td>\n14<\/td>\n<\/tr>\n
      M33X2<\/td>\n365600<\/td>\n342750<\/td>\n297050<\/td>\n122<\/td>\n18<\/td>\n14<\/td>\n<\/tr>\n
      M36<\/td>\n392000<\/td>\n367500<\/td>\n318500<\/td>\n136<\/td>\n21<\/td>\n16<\/td>\n<\/tr>\n
      M36X3<\/td>\n415200<\/td>\n389250<\/td>\n337350<\/td>\n136<\/td>\n21<\/td>\n16<\/td>\n<\/tr>\n
      M39<\/td>\n468800<\/td>\n439500<\/td>\n380900<\/td>\n150<\/td>\n23<\/td>\n18<\/td>\n<\/tr>\n
      M39X3<\/td>\n494400<\/td>\n463500<\/td>\n401700<\/td>\n150<\/td>\n23<\/td>\n18<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n
      \n

      \u00c9crous de couple pr\u00e9pond\u00e9rant de classe 10<\/h2>\n

      La classe 10 utilise 80% de classe 10.9 charge d'\u00e9preuve des boulons, pour les applications \u00e0 haute r\u00e9sistance.<\/p>\n

      \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
      Taille du fil<\/th>\nForce de serrage d'essai F80<\/sub> \/ N<\/th>\nLimite sup\u00e9rieure F75<\/sub> \/ N<\/th>\nLimite inf\u00e9rieure F65<\/sub> \/ N<\/th>\n1\u00e8re installation TFV,max<\/sub> \/ (N\u00b7m)<\/th>\n1er retrait TFd,min<\/sub> \/ (N\u00b7m)<\/th>\n5\u00e8me retrait TFd,min<\/sub> \/ (N\u00b7m)<\/th>\n<\/tr>\n<\/thead>\n
      M5<\/td>\n9440<\/td>\n8850<\/td>\n7670<\/td>\n2.1<\/td>\n0.35<\/td>\n0.24<\/td>\n<\/tr>\n
      M6<\/td>\n13360<\/td>\n12525<\/td>\n10855<\/td>\n4<\/td>\n0.55<\/td>\n0.4<\/td>\n<\/tr>\n
      M7<\/td>\n19200<\/td>\n18000<\/td>\n15600<\/td>\n6<\/td>\n0.85<\/td>\n0.6<\/td>\n<\/tr>\n
      M8<\/td>\n24320<\/td>\n22800<\/td>\n19760<\/td>\n8<\/td>\n1.15<\/td>\n0.8<\/td>\n<\/tr>\n
      M8X1<\/td>\n26000<\/td>\n24375<\/td>\n21125<\/td>\n8<\/td>\n1.15<\/td>\n0.8<\/td>\n<\/tr>\n
      M10<\/td>\n38480<\/td>\n36075<\/td>\n31265<\/td>\n14<\/td>\n2<\/td>\n1.4<\/td>\n<\/tr>\n
      M10X1,25<\/td>\n40640<\/td>\n38100<\/td>\n33020<\/td>\n14<\/td>\n2<\/td>\n1.4<\/td>\n<\/tr>\n
      M10X1<\/td>\n42800<\/td>\n40125<\/td>\n34775<\/td>\n14<\/td>\n2<\/td>\n1.4<\/td>\n<\/tr>\n
      M12<\/td>\n56000<\/td>\n52500<\/td>\n45500<\/td>\n21<\/td>\n3.1<\/td>\n2.1<\/td>\n<\/tr>\n
      M12X1.5<\/td>\n58480<\/td>\n54825<\/td>\n47515<\/td>\n21<\/td>\n3.1<\/td>\n2.1<\/td>\n<\/tr>\n
      M12X1,25<\/td>\n61120<\/td>\n57300<\/td>\n49660<\/td>\n21<\/td>\n3.1<\/td>\n2.1<\/td>\n<\/tr>\n
      M14<\/td>\n76400<\/td>\n71625<\/td>\n62075<\/td>\n31<\/td>\n4.4<\/td>\n3<\/td>\n<\/tr>\n
      M14X1,5<\/td>\n83200<\/td>\n78000<\/td>\n67600<\/td>\n31<\/td>\n4.4<\/td>\n3<\/td>\n<\/tr>\n
      M16<\/td>\n104000<\/td>\n97500<\/td>\n84500<\/td>\n42<\/td>\n6<\/td>\n4.2<\/td>\n<\/tr>\n
      M16X1,5<\/td>\n111200<\/td>\n104250<\/td>\n90350<\/td>\n42<\/td>\n6<\/td>\n4.2<\/td>\n<\/tr>\n
      M18<\/td>\n127200<\/td>\n119250<\/td>\n103350<\/td>\n56<\/td>\n8<\/td>\n5.5<\/td>\n<\/tr>\n
      M18X1.5<\/td>\n143200<\/td>\n134250<\/td>\n116350<\/td>\n56<\/td>\n8<\/td>\n5.5<\/td>\n<\/tr>\n
      M20<\/td>\n162400<\/td>\n152250<\/td>\n131950<\/td>\n72<\/td>\n10.5<\/td>\n7<\/td>\n<\/tr>\n
      M20X1.5<\/td>\n180800<\/td>\n169500<\/td>\n146900<\/td>\n72<\/td>\n10.5<\/td>\n7<\/td>\n<\/tr>\n
      M22<\/td>\n201600<\/td>\n189000<\/td>\n163800<\/td>\n90<\/td>\n13<\/td>\n9<\/td>\n<\/tr>\n
      M22X1.5<\/td>\n220800<\/td>\n207000<\/td>\n179400<\/td>\n90<\/td>\n13<\/td>\n9<\/td>\n<\/tr>\n
      M24<\/td>\n234400<\/td>\n219750<\/td>\n190450<\/td>\n106<\/td>\n15<\/td>\n10.5<\/td>\n<\/tr>\n
      M24X2<\/td>\n255200<\/td>\n239250<\/td>\n207350<\/td>\n106<\/td>\n15<\/td>\n10.5<\/td>\n<\/tr>\n
      M27<\/td>\n304800<\/td>\n285750<\/td>\n247650<\/td>\n123<\/td>\n17<\/td>\n12<\/td>\n<\/tr>\n
      M27X2<\/td>\n329600<\/td>\n309000<\/td>\n267800<\/td>\n123<\/td>\n17<\/td>\n12<\/td>\n<\/tr>\n
      M30<\/td>\n372800<\/td>\n349500<\/td>\n302900<\/td>\n140<\/td>\n19<\/td>\n14<\/td>\n<\/tr>\n
      M30X2<\/td>\n412000<\/td>\n386250<\/td>\n334750<\/td>\n140<\/td>\n19<\/td>\n14<\/td>\n<\/tr>\n
      M33<\/td>\n460800<\/td>\n432000<\/td>\n374400<\/td>\n160<\/td>\n21.5<\/td>\n15.5<\/td>\n<\/tr>\n
      M33X2<\/td>\n505600<\/td>\n474000<\/td>\n410800<\/td>\n160<\/td>\n21.5<\/td>\n15.5<\/td>\n<\/tr>\n
      M36<\/td>\n542400<\/td>\n508500<\/td>\n440700<\/td>\n180<\/td>\n24<\/td>\n17.5<\/td>\n<\/tr>\n
      M36X3<\/td>\n574400<\/td>\n538500<\/td>\n466700<\/td>\n180<\/td>\n24<\/td>\n17.5<\/td>\n<\/tr>\n
      M39<\/td>\n648000<\/td>\n607500<\/td>\n526500<\/td>\n200<\/td>\n26.5<\/td>\n19.5<\/td>\n<\/tr>\n
      M39X3<\/td>\n684000<\/td>\n641250<\/td>\n555750<\/td>\n200<\/td>\n26.5<\/td>\n19.5<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n
      \n

      FAQ<\/h2>\n

      Quel est l'objectif du couple de serrage appliqu\u00e9 aux \u00e9crous de blocage\u00a0?<\/h3>\n

      Elle offre une r\u00e9sistance au desserrage d\u00fb aux vibrations, mesur\u00e9e par des cycles d'installation et de d\u00e9montage afin de garantir des performances constantes.<\/p>\n

      En quoi la classification diff\u00e8re-t-elle entre les \u00e9crous \u00e0 insert enti\u00e8rement m\u00e9talliques et les \u00e9crous \u00e0 insert non m\u00e9talliques\u00a0?<\/h3>\n

      Pour les inserts non m\u00e9talliques, le couple maximal de la premi\u00e8re installation est de 50% parmi les valeurs indiqu\u00e9es afin d'\u00e9viter d'endommager l'insert.<\/p>\n

      Que se passe-t-il si le couple tombe en dessous du minimum apr\u00e8s le 5e d\u00e9montage\u00a0?<\/h3>\n

      L'\u00e9crou ne passe pas le test\u00a0; choisissez une classe sup\u00e9rieure ou v\u00e9rifiez les conditions d'assemblage telles que la lubrification et l'ajustement du filetage.<\/p>\n

      Comment calculer les limites de force de serrage ?<\/h3>\n

      Charge d'\u00e9preuve sup\u00e9rieure\u00a0: 75%\u00a0; charge d'\u00e9preuve inf\u00e9rieure\u00a0: 65%. Utilis\u00e9e pour l'\u00e9valuation du coefficient de frottement dans le cadre du contr\u00f4le qualit\u00e9.<\/p>\n

      Ces valeurs s'appliquent-elles uniquement aux pas fins\u00a0?<\/h3>\n

      Non, les tableaux incluent \u00e0 la fois le filetage grossier et fin\u00a0; assurez-vous que les sp\u00e9cifications du filetage correspondent pour des tests pr\u00e9cis.<\/p>\n

      Quelles sont les normes de r\u00e9f\u00e9rence pour les charges d'\u00e9preuve ?<\/h3>\n

      ISO 898-1\/2 ou GB\/T 3098.1 pour les charges des boulons\/\u00e9crous, assurant la compatibilit\u00e9 dans les assemblages.<\/p>\n<\/div>\n

       <\/p>","protected":false},"excerpt":{"rendered":"

      Introduction to GB\/T 3098.10 Standard This standard specifies mechanical properties for prevailing torque type steel lock nuts, ensuring vibration resistance in fastening applications. It aligns with ISO 2320-2015 for test methods, covering classes 04, 05, 5, 6, 8, and 10. Proper selection and testing maintain assembly integrity under dynamic loads. Scope GB\/T 3098.10-1993 defines performance […]<\/p>","protected":false},"author":2,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":"","footnotes":""},"categories":[220],"tags":[],"class_list":["post-5717","post","type-post","status-publish","format-standard","hentry","category-technical-documentation-and-references"],"_links":{"self":[{"href":"https:\/\/korea-transmission.com\/fr\/wp-json\/wp\/v2\/posts\/5717","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/korea-transmission.com\/fr\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/korea-transmission.com\/fr\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/korea-transmission.com\/fr\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/korea-transmission.com\/fr\/wp-json\/wp\/v2\/comments?post=5717"}],"version-history":[{"count":2,"href":"https:\/\/korea-transmission.com\/fr\/wp-json\/wp\/v2\/posts\/5717\/revisions"}],"predecessor-version":[{"id":5719,"href":"https:\/\/korea-transmission.com\/fr\/wp-json\/wp\/v2\/posts\/5717\/revisions\/5719"}],"wp:attachment":[{"href":"https:\/\/korea-transmission.com\/fr\/wp-json\/wp\/v2\/media?parent=5717"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/korea-transmission.com\/fr\/wp-json\/wp\/v2\/categories?post=5717"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/korea-transmission.com\/fr\/wp-json\/wp\/v2\/tags?post=5717"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}