{"id":5757,"date":"2025-12-24T05:18:00","date_gmt":"2025-12-24T05:18:00","guid":{"rendered":"https:\/\/korea-transmission.com\/?p=5757"},"modified":"2025-12-24T05:18:19","modified_gmt":"2025-12-24T05:18:19","slug":"gb-t-9145-2003-thread-limit-dimensions","status":"publish","type":"post","link":"https:\/\/korea-transmission.com\/es\/blog\/gb-t-9145-2003-thread-limit-dimensions\/","title":{"rendered":"Dimensiones l\u00edmite de rosca GB\/T 9145-2003"},"content":{"rendered":"

[et_pb_section admin_label=”section”]
\n\t\t\t[et_pb_row admin_label=”row”]
\n\t\t\t\t[et_pb_column type=”4_4″][et_pb_text admin_label=”Text”]<\/p>\n

\n

Introducci\u00f3n a la norma GB\/T 9145-2003<\/h2>\n

Esta norma especifica las dimensiones l\u00edmite para roscas m\u00e9tricas de uso general de precisi\u00f3n media en la serie preferida, garantizando la intercambiabilidad y el rendimiento en ensamblajes mec\u00e1nicos. Abarca roscas de paso grueso y fino para aplicaciones internas y externas, con tolerancias aplicadas antes del recubrimiento para capas delgadas.<\/p>\n<\/div>\n

\n

Alcance<\/h2>\n

La norma GB\/T 9145-2003 define las dimensiones l\u00edmite para roscas m\u00e9tricas con precisi\u00f3n de tolerancia media y series preferidas, aplicables a fines de ingenier\u00eda general. Garantiza que los perfiles de rosca no superen la condici\u00f3n m\u00e1xima de material definida por los perfiles b\u00e1sicos y las posiciones de tolerancia. Esto es fundamental para elementos de fijaci\u00f3n en industrias que requieren un acoplamiento fiable sin interferencias, especialmente despu\u00e9s del recubrimiento.<\/p>\n

    \n
  • Se aplica a las roscas antes de la aplicaci\u00f3n de recubrimientos delgados como la galvanoplastia.<\/li>\n
  • Tras el proceso de recubrimiento, los perfiles deben permanecer dentro de las posiciones H o h.<\/li>\n
  • Se centra en longitudes de acoplamiento medias para lograr un equilibrio entre resistencia y facilidad de fabricaci\u00f3n.<\/li>\n<\/ul>\n<\/div>\n
    \n

    Dimensiones l\u00edmite generales<\/h2>\n

    Ning\u00fan punto del perfil de la ra\u00edz de la rosca debe exceder el perfil m\u00e1ximo permitido seg\u00fan la forma y tolerancia b\u00e1sicas. Para roscas chapadas, los contornos reales despu\u00e9s del chapado no deben sobrepasar las posiciones H\/h. Esto evita el apriete excesivo o fallos en los ensamblajes. Nota: Las tolerancias son adecuadas para chapados delgados; los recubrimientos m\u00e1s gruesos requieren ajustes.<\/p>\n<\/div>\n

    \n

    Roscas internas de paso grueso<\/h2>\n

    Para precisi\u00f3n media, la longitud de acoplamiento es media. Zonas de tolerancia: 5H para d \u2264 1,4 mm; 6H para d > 1,4 mm. L\u00edmites para di\u00e1metro primitivo D2<\/sub> y di\u00e1metro menor D1<\/sub> Aseg\u00farese de que encaje correctamente con las roscas externas.<\/p>\n

    \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
    Hilo<\/th>\nDuraci\u00f3n del compromiso<\/th>\nDi\u00e1metro de paso D2<\/sub><\/th>\nDi\u00e1metro menor D1<\/sub><\/th>\n<\/tr>\n
    ><\/th>\n\u2264<\/th>\nm\u00e1ximo<\/th>\nm\u00edn.<\/th>\nm\u00e1ximo<\/th>\nm\u00edn.<\/th>\n<\/tr>\n<\/thead>\n
    M1<\/td>\n0.6<\/td>\n1.7<\/td>\n0.894<\/td>\n0.838<\/td>\n0.785<\/td>\n0.729<\/td>\n<\/tr>\n
    M1.2<\/td>\n0.6<\/td>\n1.7<\/td>\n1.094<\/td>\n1.038<\/td>\n0.985<\/td>\n0.929<\/td>\n<\/tr>\n
    M1.4<\/td>\n0.7<\/td>\n2<\/td>\n1.265<\/td>\n1.205<\/td>\n1.142<\/td>\n1.075<\/td>\n<\/tr>\n
    M1.6<\/td>\n0.8<\/td>\n2.6<\/td>\n1.458<\/td>\n1.373<\/td>\n1.321<\/td>\n1.221<\/td>\n<\/tr>\n
    M1.8<\/td>\n0.8<\/td>\n2.6<\/td>\n1.658<\/td>\n1.573<\/td>\n1.521<\/td>\n1.421<\/td>\n<\/tr>\n
    M2<\/td>\n1<\/td>\n3<\/td>\n1.83<\/td>\n1.74<\/td>\n1.679<\/td>\n1.567<\/td>\n<\/tr>\n
    M2.5<\/td>\n1.3<\/td>\n3.8<\/td>\n2.303<\/td>\n2.208<\/td>\n2.138<\/td>\n2.013<\/td>\n<\/tr>\n
    M3<\/td>\n1.5<\/td>\n4.5<\/td>\n2.775<\/td>\n2.675<\/td>\n2.599<\/td>\n2.459<\/td>\n<\/tr>\n
    M3.5<\/td>\n1.7<\/td>\n5<\/td>\n3.222<\/td>\n3.11<\/td>\n3.01<\/td>\n2.85<\/td>\n<\/tr>\n
    M4<\/td>\n2<\/td>\n6<\/td>\n3.663<\/td>\n3.545<\/td>\n3.422<\/td>\n3.242<\/td>\n<\/tr>\n
    M5<\/td>\n2.5<\/td>\n7.5<\/td>\n4.605<\/td>\n4.48<\/td>\n4.334<\/td>\n4.134<\/td>\n<\/tr>\n
    M6<\/td>\n3<\/td>\n9<\/td>\n5.5<\/td>\n5.35<\/td>\n5.153<\/td>\n4.917<\/td>\n<\/tr>\n
    M7<\/td>\n3<\/td>\n9<\/td>\n6.5<\/td>\n6.35<\/td>\n6.153<\/td>\n5.917<\/td>\n<\/tr>\n
    M8<\/td>\n4<\/td>\n12<\/td>\n7.348<\/td>\n7.188<\/td>\n6.912<\/td>\n6.647<\/td>\n<\/tr>\n
    M10<\/td>\n5<\/td>\n15<\/td>\n9.206<\/td>\n9.026<\/td>\n8.676<\/td>\n8.376<\/td>\n<\/tr>\n
    M12<\/td>\n6<\/td>\n18<\/td>\n11.063<\/td>\n10.863<\/td>\n10.441<\/td>\n10.106<\/td>\n<\/tr>\n
    M14<\/td>\n8<\/td>\n24<\/td>\n12.913<\/td>\n12.701<\/td>\n12.21<\/td>\n11.835<\/td>\n<\/tr>\n
    M16<\/td>\n8<\/td>\n24<\/td>\n14.913<\/td>\n14.701<\/td>\n14.21<\/td>\n13.835<\/td>\n<\/tr>\n
    M18<\/td>\n10<\/td>\n30<\/td>\n16.6<\/td>\n16.376<\/td>\n15.744<\/td>\n15.294<\/td>\n<\/tr>\n
    M20<\/td>\n10<\/td>\n30<\/td>\n18.6<\/td>\n18.376<\/td>\n17.744<\/td>\n17.294<\/td>\n<\/tr>\n
    M22<\/td>\n10<\/td>\n30<\/td>\n20.6<\/td>\n20.376<\/td>\n19.744<\/td>\n19.294<\/td>\n<\/tr>\n
    M24<\/td>\n12<\/td>\n36<\/td>\n22.316<\/td>\n22.051<\/td>\n21.252<\/td>\n20.752<\/td>\n<\/tr>\n
    M27<\/td>\n12<\/td>\n36<\/td>\n25.316<\/td>\n25.051<\/td>\n24.252<\/td>\n23.752<\/td>\n<\/tr>\n
    M30<\/td>\n15<\/td>\n45<\/td>\n28.007<\/td>\n27.727<\/td>\n26.771<\/td>\n26.211<\/td>\n<\/tr>\n
    M33<\/td>\n15<\/td>\n45<\/td>\n31.007<\/td>\n30.727<\/td>\n29.771<\/td>\n29.211<\/td>\n<\/tr>\n
    M36<\/td>\n18<\/td>\n53<\/td>\n33.702<\/td>\n33.402<\/td>\n32.27<\/td>\n31.67<\/td>\n<\/tr>\n
    M39<\/td>\n18<\/td>\n53<\/td>\n36.702<\/td>\n36.402<\/td>\n35.27<\/td>\n34.67<\/td>\n<\/tr>\n
    M42<\/td>\n21<\/td>\n63<\/td>\n39.392<\/td>\n39.077<\/td>\n37.799<\/td>\n37.129<\/td>\n<\/tr>\n
    M45<\/td>\n21<\/td>\n63<\/td>\n42.392<\/td>\n42.077<\/td>\n40.799<\/td>\n40.129<\/td>\n<\/tr>\n
    M48<\/td>\n24<\/td>\n71<\/td>\n45.087<\/td>\n44.752<\/td>\n43.297<\/td>\n42.587<\/td>\n<\/tr>\n
    M52<\/td>\n24<\/td>\n71<\/td>\n49.087<\/td>\n48.752<\/td>\n46.681<\/td>\n45.971<\/td>\n<\/tr>\n
    M56<\/td>\n28<\/td>\n85<\/td>\n52.783<\/td>\n52.428<\/td>\n50.796<\/td>\n50.046<\/td>\n<\/tr>\n
    M60<\/td>\n28<\/td>\n85<\/td>\n56.783<\/td>\n56.428<\/td>\n54.796<\/td>\n54.046<\/td>\n<\/tr>\n
    M64<\/td>\n32<\/td>\n95<\/td>\n60.478<\/td>\n60.103<\/td>\n58.305<\/td>\n57.505<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

    Estas dimensiones sirven de gu\u00eda para la fabricaci\u00f3n de tuercas, garantizando la compatibilidad con los pernos en condiciones de carga media.<\/p>\n<\/div>\n

    \n

    Roscas externas de paso grueso<\/h2>\n

    Precisi\u00f3n media, acoplamiento medio. Zonas de tolerancia: 6h para d \u2264 1,4 mm; 6g para d > 1,4 mm. L\u00edmites para el di\u00e1metro mayor d y el di\u00e1metro primitivo d2<\/sub>, con radio de ra\u00edz m\u00ednimo por GB\/T 197-2003.<\/p>\n

    \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
    Hilo<\/th>\nDuraci\u00f3n del compromiso<\/th>\nDi\u00e1metro mayor d<\/th>\nDi\u00e1metro de paso d2<\/sub><\/th>\nRadio m\u00ednimo de la ra\u00edza<\/sup><\/th>\n<\/tr>\n
    ><\/th>\n\u2264<\/th>\nm\u00e1ximo<\/th>\nm\u00edn.<\/th>\nm\u00e1ximo<\/th>\nm\u00edn.<\/th>\nm\u00edn.<\/th>\n<\/tr>\n<\/thead>\n
    M1<\/td>\n0.6<\/td>\n1.7<\/td>\n1<\/td>\n0.933<\/td>\n0.838<\/td>\n0.785<\/td>\n0.031<\/td>\n<\/tr>\n
    M1.2<\/td>\n0.6<\/td>\n1.7<\/td>\n1.2<\/td>\n1.133<\/td>\n1.038<\/td>\n0.985<\/td>\n0.031<\/td>\n<\/tr>\n
    M1.4<\/td>\n0.7<\/td>\n2<\/td>\n1.4<\/td>\n1.325<\/td>\n1.205<\/td>\n1.149<\/td>\n0.038<\/td>\n<\/tr>\n
    M1.6<\/td>\n0.8<\/td>\n2.6<\/td>\n1.581<\/td>\n1.496<\/td>\n1.354<\/td>\n1.291<\/td>\n0.044<\/td>\n<\/tr>\n
    M1.8<\/td>\n0.8<\/td>\n2.6<\/td>\n1.781<\/td>\n1.696<\/td>\n1.554<\/td>\n1.491<\/td>\n0.044<\/td>\n<\/tr>\n
    M2<\/td>\n1<\/td>\n3<\/td>\n1.981<\/td>\n1.886<\/td>\n1.721<\/td>\n1.654<\/td>\n0.05<\/td>\n<\/tr>\n
    M2.5<\/td>\n1.3<\/td>\n3.8<\/td>\n2.48<\/td>\n2.38<\/td>\n2.188<\/td>\n2.117<\/td>\n0.056<\/td>\n<\/tr>\n
    M3<\/td>\n1.5<\/td>\n4.5<\/td>\n2.98<\/td>\n2.874<\/td>\n2.655<\/td>\n2.58<\/td>\n0.063<\/td>\n<\/tr>\n
    M3.5<\/td>\n1.7<\/td>\n5<\/td>\n3.479<\/td>\n3.354<\/td>\n3.089<\/td>\n3.004<\/td>\n0.075<\/td>\n<\/tr>\n
    M4<\/td>\n2<\/td>\n6<\/td>\n3.978<\/td>\n3.838<\/td>\n3.523<\/td>\n3.433<\/td>\n0.088<\/td>\n<\/tr>\n
    M5<\/td>\n2.5<\/td>\n7.5<\/td>\n4.976<\/td>\n4.826<\/td>\n4.456<\/td>\n4.361<\/td>\n0.1<\/td>\n<\/tr>\n
    M6<\/td>\n3<\/td>\n9<\/td>\n5.974<\/td>\n5.794<\/td>\n5.324<\/td>\n5.212<\/td>\n0.125<\/td>\n<\/tr>\n
    M7<\/td>\n3<\/td>\n9<\/td>\n6.974<\/td>\n6.794<\/td>\n6.324<\/td>\n6.212<\/td>\n0.125<\/td>\n<\/tr>\n
    M8<\/td>\n4<\/td>\n12<\/td>\n7.972<\/td>\n7.76<\/td>\n7.16<\/td>\n7.042<\/td>\n0.156<\/td>\n<\/tr>\n
    M10<\/td>\n5<\/td>\n15<\/td>\n9.968<\/td>\n9.732<\/td>\n8.994<\/td>\n8.862<\/td>\n0.188<\/td>\n<\/tr>\n
    M12<\/td>\n6<\/td>\n18<\/td>\n11.966<\/td>\n11.701<\/td>\n10.829<\/td>\n10.679<\/td>\n0.219<\/td>\n<\/tr>\n
    M14<\/td>\n8<\/td>\n24<\/td>\n13.962<\/td>\n13.682<\/td>\n12.663<\/td>\n12.503<\/td>\n0.25<\/td>\n<\/tr>\n
    M16<\/td>\n8<\/td>\n24<\/td>\n15.962<\/td>\n15.682<\/td>\n14.663<\/td>\n14.503<\/td>\n0.25<\/td>\n<\/tr>\n
    M18<\/td>\n10<\/td>\n30<\/td>\n17.958<\/td>\n17.623<\/td>\n16.334<\/td>\n16.164<\/td>\n0.313<\/td>\n<\/tr>\n
    M20<\/td>\n10<\/td>\n30<\/td>\n19.958<\/td>\n19.623<\/td>\n18.334<\/td>\n18.164<\/td>\n0.313<\/td>\n<\/tr>\n
    M22<\/td>\n10<\/td>\n30<\/td>\n21.958<\/td>\n21.623<\/td>\n20.334<\/td>\n20.164<\/td>\n0.313<\/td>\n<\/tr>\n
    M24<\/td>\n12<\/td>\n36<\/td>\n23.952<\/td>\n23.577<\/td>\n22.003<\/td>\n21.803<\/td>\n0.375<\/td>\n<\/tr>\n
    M27<\/td>\n12<\/td>\n36<\/td>\n26.952<\/td>\n26.577<\/td>\n25.003<\/td>\n24.803<\/td>\n0.375<\/td>\n<\/tr>\n
    M30<\/td>\n15<\/td>\n45<\/td>\n29.947<\/td>\n29.522<\/td>\n27.674<\/td>\n27.462<\/td>\n0.438<\/td>\n<\/tr>\n
    M33<\/td>\n15<\/td>\n45<\/td>\n32.947<\/td>\n32.522<\/td>\n30.674<\/td>\n30.462<\/td>\n0.438<\/td>\n<\/tr>\n
    M36<\/td>\n18<\/td>\n53<\/td>\n35.94<\/td>\n35.465<\/td>\n33.342<\/td>\n33.118<\/td>\n0.5<\/td>\n<\/tr>\n
    M39<\/td>\n18<\/td>\n53<\/td>\n38.94<\/td>\n38.465<\/td>\n36.342<\/td>\n36.118<\/td>\n0.5<\/td>\n<\/tr>\n
    M42<\/td>\n21<\/td>\n63<\/td>\n41.937<\/td>\n41.437<\/td>\n39.014<\/td>\n38.778<\/td>\n0.563<\/td>\n<\/tr>\n
    M45<\/td>\n21<\/td>\n63<\/td>\n44.937<\/td>\n44.437<\/td>\n42.014<\/td>\n41.778<\/td>\n0.563<\/td>\n<\/tr>\n
    M48<\/td>\n24<\/td>\n71<\/td>\n47.929<\/td>\n47.399<\/td>\n44.681<\/td>\n44.431<\/td>\n0.625<\/td>\n<\/tr>\n
    M52<\/td>\n24<\/td>\n71<\/td>\n51.929<\/td>\n51.399<\/td>\n48.681<\/td>\n48.431<\/td>\n0.625<\/td>\n<\/tr>\n
    M56<\/td>\n28<\/td>\n85<\/td>\n55.925<\/td>\n55.365<\/td>\n52.353<\/td>\n52.088<\/td>\n0.688<\/td>\n<\/tr>\n
    M60<\/td>\n28<\/td>\n85<\/td>\n59.925<\/td>\n59.365<\/td>\n56.353<\/td>\n56.088<\/td>\n0.688<\/td>\n<\/tr>\n
    M64<\/td>\n32<\/td>\n95<\/td>\n63.92<\/td>\n63.32<\/td>\n60.023<\/td>\n59.743<\/td>\n0.75<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

    a<\/sup> Consulte el cap\u00edtulo 7 y la tabla 9 de la norma GB\/T 197-2003 para obtener detalles sobre el radio de la ra\u00edz. Estos garantizan la distribuci\u00f3n de la tensi\u00f3n y la resistencia a la fatiga.<\/p>\n<\/div>\n

    \n

    Roscas internas de paso fino<\/h2>\n

    Precisi\u00f3n media, acoplamiento medio, zona de tolerancia 6H. Los pasos finos ofrecen mayor resistencia a las vibraciones y precisi\u00f3n de ajuste.<\/p>\n

    \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
    Hilo<\/th>\nDuraci\u00f3n del compromiso<\/th>\nDi\u00e1metro de paso D2<\/sub><\/th>\nDi\u00e1metro menor D1<\/sub><\/th>\n<\/tr>\n
    ><\/th>\n\u2264<\/th>\nm\u00e1ximo<\/th>\nm\u00edn.<\/th>\nm\u00e1ximo<\/th>\nm\u00edn.<\/th>\n<\/tr>\n<\/thead>\n
    M8\u00d71<\/td>\n3<\/td>\n9<\/td>\n7.5<\/td>\n7.35<\/td>\n7.153<\/td>\n6.917<\/td>\n<\/tr>\n
    M10\u00d71<\/td>\n4<\/td>\n12<\/td>\n9.5<\/td>\n9.35<\/td>\n9.153<\/td>\n8.917<\/td>\n<\/tr>\n
    M10\u00d71.25<\/td>\n4<\/td>\n12<\/td>\n9.348<\/td>\n9.188<\/td>\n8.912<\/td>\n8.647<\/td>\n<\/tr>\n
    M12\u00d71.25<\/td>\n4.5<\/td>\n13<\/td>\n11.368<\/td>\n11.188<\/td>\n10.912<\/td>\n10.647<\/td>\n<\/tr>\n
    M12\u00d71.5<\/td>\n4.5<\/td>\n13<\/td>\n11.216<\/td>\n11.026<\/td>\n10.676<\/td>\n10.376<\/td>\n<\/tr>\n
    M14\u00d71.5<\/td>\n5.6<\/td>\n16<\/td>\n13.216<\/td>\n13.026<\/td>\n12.676<\/td>\n12.376<\/td>\n<\/tr>\n
    M16\u00d71.5<\/td>\n5.6<\/td>\n16<\/td>\n15.216<\/td>\n15.026<\/td>\n14.676<\/td>\n14.376<\/td>\n<\/tr>\n
    M18\u00d71.5<\/td>\n5.6<\/td>\n16<\/td>\n17.216<\/td>\n17.026<\/td>\n16.676<\/td>\n16.376<\/td>\n<\/tr>\n
    M18\u00d72<\/td>\n5.6<\/td>\n16<\/td>\n16.913<\/td>\n16.701<\/td>\n16.21<\/td>\n15.835<\/td>\n<\/tr>\n
    M20\u00d71.5<\/td>\n5.6<\/td>\n16<\/td>\n19.216<\/td>\n19.026<\/td>\n18.676<\/td>\n18.376<\/td>\n<\/tr>\n
    M20\u00d72<\/td>\n5.6<\/td>\n16<\/td>\n18.913<\/td>\n18.701<\/td>\n18.21<\/td>\n17.835<\/td>\n<\/tr>\n
    M22\u00d71.5<\/td>\n5.6<\/td>\n16<\/td>\n21.216<\/td>\n21.026<\/td>\n20.676<\/td>\n20.376<\/td>\n<\/tr>\n
    M22\u00d72<\/td>\n5.6<\/td>\n16<\/td>\n20.913<\/td>\n20.701<\/td>\n20.21<\/td>\n19.835<\/td>\n<\/tr>\n
    M24\u00d72<\/td>\n8.5<\/td>\n25<\/td>\n22.925<\/td>\n22.701<\/td>\n22.21<\/td>\n21.835<\/td>\n<\/tr>\n
    M27\u00d72<\/td>\n8.5<\/td>\n25<\/td>\n25.925<\/td>\n25.701<\/td>\n25.21<\/td>\n24.835<\/td>\n<\/tr>\n
    M30\u00d72<\/td>\n8.5<\/td>\n25<\/td>\n28.925<\/td>\n28.701<\/td>\n28.21<\/td>\n27.835<\/td>\n<\/tr>\n
    M33\u00d72<\/td>\n8.5<\/td>\n25<\/td>\n31.925<\/td>\n31.701<\/td>\n31.21<\/td>\n30.835<\/td>\n<\/tr>\n
    M36\u00d73<\/td>\n12<\/td>\n36<\/td>\n34.316<\/td>\n34.051<\/td>\n33.252<\/td>\n32.752<\/td>\n<\/tr>\n
    M39\u00d73<\/td>\n12<\/td>\n36<\/td>\n37.316<\/td>\n37.051<\/td>\n36.252<\/td>\n35.752<\/td>\n<\/tr>\n
    M42\u00d73<\/td>\n12<\/td>\n36<\/td>\n40.316<\/td>\n40.051<\/td>\n39.252<\/td>\n38.752<\/td>\n<\/tr>\n
    M45\u00d73<\/td>\n12<\/td>\n36<\/td>\n43.316<\/td>\n43.051<\/td>\n42.252<\/td>\n41.752<\/td>\n<\/tr>\n
    M48\u00d73<\/td>\n15<\/td>\n45<\/td>\n46.331<\/td>\n46.051<\/td>\n45.252<\/td>\n44.752<\/td>\n<\/tr>\n
    M52\u00d74<\/td>\n19<\/td>\n56<\/td>\n49.717<\/td>\n49.402<\/td>\n48.27<\/td>\n47.67<\/td>\n<\/tr>\n
    M56\u00d74<\/td>\n19<\/td>\n56<\/td>\n53.717<\/td>\n53.402<\/td>\n52.27<\/td>\n51.67<\/td>\n<\/tr>\n
    M60\u00d74<\/td>\n19<\/td>\n56<\/td>\n57.717<\/td>\n57.402<\/td>\n56.27<\/td>\n55.67<\/td>\n<\/tr>\n
    M64\u00d74<\/td>\n19<\/td>\n56<\/td>\n61.717<\/td>\n61.402<\/td>\n60.27<\/td>\n59.67<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

    Estos valores favorecen una distribuci\u00f3n de carga m\u00e1s precisa en entornos con altas vibraciones.<\/p>\n<\/div>\n

    \n

    Roscas externas de paso fino<\/h2>\n

    Precisi\u00f3n media, acoplamiento medio, zona de tolerancia de 6 g. Proporciona secciones centrales m\u00e1s resistentes para una mayor resistencia al corte.<\/p>\n

    \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
    Hilo<\/th>\nDuraci\u00f3n del compromiso<\/th>\nDi\u00e1metro mayor d<\/th>\nDi\u00e1metro de paso d2<\/sub><\/th>\nRadio m\u00ednimo de la ra\u00edza<\/sup><\/th>\n<\/tr>\n
    ><\/th>\n\u2264<\/th>\nm\u00e1ximo<\/th>\nm\u00edn.<\/th>\nm\u00e1ximo<\/th>\nm\u00edn.<\/th>\nm\u00edn.<\/th>\n<\/tr>\n<\/thead>\n
    M8\u00d71<\/td>\n3<\/td>\n9<\/td>\n7.974<\/td>\n7.794<\/td>\n7.324<\/td>\n7.212<\/td>\n0.125<\/td>\n<\/tr>\n
    M10\u00d71<\/td>\n4<\/td>\n12<\/td>\n9.974<\/td>\n9.794<\/td>\n9.324<\/td>\n9.212<\/td>\n0.125<\/td>\n<\/tr>\n
    M10\u00d71.25<\/td>\n4<\/td>\n12<\/td>\n9.972<\/td>\n9.76<\/td>\n9.16<\/td>\n9.042<\/td>\n0.156<\/td>\n<\/tr>\n
    M12\u00d71.25<\/td>\n4.5<\/td>\n13<\/td>\n11.972<\/td>\n11.76<\/td>\n11.16<\/td>\n11.028<\/td>\n0.156<\/td>\n<\/tr>\n
    M12\u00d71.5<\/td>\n4.5<\/td>\n13<\/td>\n11.968<\/td>\n11.732<\/td>\n10.994<\/td>\n10.854<\/td>\n0.188<\/td>\n<\/tr>\n
    M14\u00d71.5<\/td>\n5.6<\/td>\n16<\/td>\n13.968<\/td>\n13.732<\/td>\n12.994<\/td>\n12.854<\/td>\n0.188<\/td>\n<\/tr>\n
    M16\u00d71.5<\/td>\n5.6<\/td>\n16<\/td>\n15.968<\/td>\n15.732<\/td>\n14.994<\/td>\n14.854<\/td>\n0.188<\/td>\n<\/tr>\n
    M18\u00d71.5<\/td>\n5.6<\/td>\n16<\/td>\n17.968<\/td>\n17.732<\/td>\n16.994<\/td>\n16.854<\/td>\n0.188<\/td>\n<\/tr>\n
    M18\u00d72<\/td>\n5.6<\/td>\n16<\/td>\n17.962<\/td>\n17.682<\/td>\n16.663<\/td>\n16.503<\/td>\n0.25<\/td>\n<\/tr>\n
    M20\u00d71.5<\/td>\n5.6<\/td>\n16<\/td>\n19.968<\/td>\n19.732<\/td>\n18.994<\/td>\n18.854<\/td>\n0.188<\/td>\n<\/tr>\n
    M20\u00d72<\/td>\n5.6<\/td>\n16<\/td>\n19.962<\/td>\n19.682<\/td>\n18.663<\/td>\n18.503<\/td>\n0.25<\/td>\n<\/tr>\n
    M22\u00d71.5<\/td>\n5.6<\/td>\n16<\/td>\n21.968<\/td>\n21.732<\/td>\n20.994<\/td>\n20.854<\/td>\n0.188<\/td>\n<\/tr>\n
    M22\u00d72<\/td>\n5.6<\/td>\n16<\/td>\n21.962<\/td>\n21.682<\/td>\n20.663<\/td>\n20.503<\/td>\n0.25<\/td>\n<\/tr>\n
    M24\u00d72<\/td>\n8.5<\/td>\n25<\/td>\n23.962<\/td>\n23.682<\/td>\n22.663<\/td>\n22.493<\/td>\n0.25<\/td>\n<\/tr>\n
    M27\u00d72<\/td>\n8.5<\/td>\n25<\/td>\n26.962<\/td>\n26.682<\/td>\n25.663<\/td>\n25.493<\/td>\n0.25<\/td>\n<\/tr>\n
    M30\u00d72<\/td>\n8.5<\/td>\n25<\/td>\n29.962<\/td>\n29.682<\/td>\n28.663<\/td>\n28.493<\/td>\n0.25<\/td>\n<\/tr>\n
    M33\u00d72<\/td>\n8.5<\/td>\n25<\/td>\n32.962<\/td>\n32.682<\/td>\n31.663<\/td>\n31.493<\/td>\n0.25<\/td>\n<\/tr>\n
    M36\u00d73<\/td>\n12<\/td>\n36<\/td>\n35.952<\/td>\n35.577<\/td>\n34.003<\/td>\n33.803<\/td>\n0.375<\/td>\n<\/tr>\n
    M39\u00d73<\/td>\n12<\/td>\n36<\/td>\n38.952<\/td>\n38.577<\/td>\n37.003<\/td>\n36.803<\/td>\n0.375<\/td>\n<\/tr>\n
    M42\u00d73<\/td>\n12<\/td>\n36<\/td>\n41.952<\/td>\n41.577<\/td>\n40.003<\/td>\n39.803<\/td>\n0.375<\/td>\n<\/tr>\n
    M45\u00d73<\/td>\n12<\/td>\n36<\/td>\n44.952<\/td>\n44.577<\/td>\n43.003<\/td>\n42.803<\/td>\n0.375<\/td>\n<\/tr>\n
    M48\u00d73<\/td>\n15<\/td>\n45<\/td>\n47.952<\/td>\n47.577<\/td>\n46.003<\/td>\n45.791<\/td>\n0.375<\/td>\n<\/tr>\n
    M52\u00d74<\/td>\n19<\/td>\n56<\/td>\n51.94<\/td>\n51.465<\/td>\n49.342<\/td>\n49.106<\/td>\n0.5<\/td>\n<\/tr>\n
    M56\u00d74<\/td>\n19<\/td>\n56<\/td>\n55.94<\/td>\n55.465<\/td>\n53.342<\/td>\n53.106<\/td>\n0.5<\/td>\n<\/tr>\n
    M60\u00d74<\/td>\n19<\/td>\n56<\/td>\n59.94<\/td>\n59.465<\/td>\n57.342<\/td>\n57.106<\/td>\n0.5<\/td>\n<\/tr>\n
    M64\u00d74<\/td>\n19<\/td>\n56<\/td>\n63.94<\/td>\n63.465<\/td>\n61.342<\/td>\n61.106<\/td>\n0.5<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

    a<\/sup> Consulte la norma GB\/T 197-2003 para conocer las especificaciones del radio de la ra\u00edz, un factor cr\u00edtico para evitar concentraciones de tensi\u00f3n.<\/p>\n<\/div>\n

    \n

    Preguntas frecuentes<\/h2>\n

    \u00bfQu\u00e9 zonas de tolerancia se aplican a las roscas internas gruesas?<\/h3>\n

    5H para di\u00e1metros \u22641,4 mm; 6H para >1,4 mm, lo que garantiza un ajuste de precisi\u00f3n media.<\/p>\n

    \u00bfC\u00f3mo afecta el recubrimiento a las dimensiones de la rosca?<\/h3>\n

    Las tolerancias son previas al recubrimiento; los perfiles posteriores al recubrimiento no deben exceder las posiciones H\/h para recubrimientos delgados para mantener el ensamblaje.<\/p>\n

    \u00bfPor qu\u00e9 utilizar roscas de paso fino?<\/h3>\n

    Proporcionan una mayor resistencia a las vibraciones y ajustes m\u00e1s precisos, con n\u00facleos m\u00e1s robustos seg\u00fan los l\u00edmites indicados en las tablas 3 y 4.<\/p>\n

    \u00bfQu\u00e9 es la duraci\u00f3n media del compromiso?<\/h3>\n

    Equilibra la resistencia de la rosca y el coste; utilice los valores de la tabla para rangos espec\u00edficos para evitar un acoplamiento excesivo o insuficiente.<\/p>\n

    \u00bfC\u00f3mo interpretar el radio de la ra\u00edz?<\/h3>\n

    Los valores m\u00ednimos establecidos en la norma GB\/T 197-2003 reducen la tensi\u00f3n; algo esencial para aplicaciones propensas a la fatiga.<\/p>\n

    \u00bfEstos l\u00edmites se aplican a todos los materiales?<\/h3>\n

    S\u00ed, pero aj\u00fastelo para recubrimientos especiales; consulte la norma para recubrimientos gruesos que requieran roscas de gran tama\u00f1o.<\/p>\n<\/div>\n

     [\/et_pb_text][\/et_pb_column]
    \n\t\t\t[\/et_pb_row]
    \n\t\t[\/et_pb_section]<\/p>","protected":false},"excerpt":{"rendered":"

    Introduction to GB\/T 9145-2003 Standard This standard specifies limit dimensions for general-purpose metric screw threads of medium accuracy in the preferred series, ensuring interchangeability and performance in mechanical assemblies. It covers coarse and fine pitch threads for internal and external applications, with tolerances applied before plating for thin coatings. Scope GB\/T 9145-2003 defines the limit […]<\/p>","protected":false},"author":2,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_et_pb_use_builder":"on","_et_pb_old_content":"

    \r\n

    Introduction to GB\/T 9145-2003 Standard<\/h2>\r\nThis standard specifies limit dimensions for general-purpose metric screw threads of medium accuracy in the preferred series, ensuring interchangeability and performance in mechanical assemblies. It covers coarse and fine pitch threads for internal and external applications, with tolerances applied before plating for thin coatings.\r\n\r\n<\/div>\r\n
    \r\n

    Scope<\/h2>\r\nGB\/T 9145-2003 defines the limit dimensions for metric screw threads with medium tolerance precision and preferred series, applicable to general engineering purposes. It ensures that thread profiles do not exceed the maximum material condition defined by basic profiles and tolerance positions. This is crucial for fasteners in industries requiring reliable mating without interference, especially post-plating.\r\n
      \r\n \t
    • Applies to threads before thin coatings like electroplating.<\/li>\r\n \t
    • Post-plating, profiles must stay within H or h positions.<\/li>\r\n \t
    • Focuses on medium engagement lengths for balanced strength and manufacturability.<\/li>\r\n<\/ul>\r\n<\/div>\r\n
      \r\n

      General Limit Dimensions<\/h2>\r\nNo point on the thread root profile shall exceed the maximum entity profile per basic form and tolerance. For plated threads, actual contours post-plating must not surpass H\/h positions. This prevents over-tightening or failure in assemblies. Note: Tolerances suit thin platings; heavier coatings require adjustments.\r\n\r\n<\/div>\r\n
      \r\n

      Coarse Pitch Internal Threads<\/h2>\r\nFor medium precision, engagement length is medium. Tolerance zones: 5H for d \u2264 1.4 mm; 6H for d > 1.4 mm. Limits for pitch diameter D2<\/sub> and minor diameter D1<\/sub> ensure proper fit with external threads.\r\n
      \r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n
      Thread<\/th>\r\nEngagement Length<\/th>\r\nPitch Diameter D2<\/sub><\/th>\r\nMinor Diameter D1<\/sub><\/th>\r\n<\/tr>\r\n
      ><\/th>\r\n\u2264<\/th>\r\nmax<\/th>\r\nmin<\/th>\r\nmax<\/th>\r\nmin<\/th>\r\n<\/tr>\r\n<\/thead>\r\n
      M1<\/td>\r\n0.6<\/td>\r\n1.7<\/td>\r\n0.894<\/td>\r\n0.838<\/td>\r\n0.785<\/td>\r\n0.729<\/td>\r\n<\/tr>\r\n
      M1.2<\/td>\r\n0.6<\/td>\r\n1.7<\/td>\r\n1.094<\/td>\r\n1.038<\/td>\r\n0.985<\/td>\r\n0.929<\/td>\r\n<\/tr>\r\n
      M1.4<\/td>\r\n0.7<\/td>\r\n2<\/td>\r\n1.265<\/td>\r\n1.205<\/td>\r\n1.142<\/td>\r\n1.075<\/td>\r\n<\/tr>\r\n
      M1.6<\/td>\r\n0.8<\/td>\r\n2.6<\/td>\r\n1.458<\/td>\r\n1.373<\/td>\r\n1.321<\/td>\r\n1.221<\/td>\r\n<\/tr>\r\n
      M1.8<\/td>\r\n0.8<\/td>\r\n2.6<\/td>\r\n1.658<\/td>\r\n1.573<\/td>\r\n1.521<\/td>\r\n1.421<\/td>\r\n<\/tr>\r\n
      M2<\/td>\r\n1<\/td>\r\n3<\/td>\r\n1.83<\/td>\r\n1.74<\/td>\r\n1.679<\/td>\r\n1.567<\/td>\r\n<\/tr>\r\n
      M2.5<\/td>\r\n1.3<\/td>\r\n3.8<\/td>\r\n2.303<\/td>\r\n2.208<\/td>\r\n2.138<\/td>\r\n2.013<\/td>\r\n<\/tr>\r\n
      M3<\/td>\r\n1.5<\/td>\r\n4.5<\/td>\r\n2.775<\/td>\r\n2.675<\/td>\r\n2.599<\/td>\r\n2.459<\/td>\r\n<\/tr>\r\n
      M3.5<\/td>\r\n1.7<\/td>\r\n5<\/td>\r\n3.222<\/td>\r\n3.11<\/td>\r\n3.01<\/td>\r\n2.85<\/td>\r\n<\/tr>\r\n
      M4<\/td>\r\n2<\/td>\r\n6<\/td>\r\n3.663<\/td>\r\n3.545<\/td>\r\n3.422<\/td>\r\n3.242<\/td>\r\n<\/tr>\r\n
      M5<\/td>\r\n2.5<\/td>\r\n7.5<\/td>\r\n4.605<\/td>\r\n4.48<\/td>\r\n4.334<\/td>\r\n4.134<\/td>\r\n<\/tr>\r\n
      M6<\/td>\r\n3<\/td>\r\n9<\/td>\r\n5.5<\/td>\r\n5.35<\/td>\r\n5.153<\/td>\r\n4.917<\/td>\r\n<\/tr>\r\n
      M7<\/td>\r\n3<\/td>\r\n9<\/td>\r\n6.5<\/td>\r\n6.35<\/td>\r\n6.153<\/td>\r\n5.917<\/td>\r\n<\/tr>\r\n
      M8<\/td>\r\n4<\/td>\r\n12<\/td>\r\n7.348<\/td>\r\n7.188<\/td>\r\n6.912<\/td>\r\n6.647<\/td>\r\n<\/tr>\r\n
      M10<\/td>\r\n5<\/td>\r\n15<\/td>\r\n9.206<\/td>\r\n9.026<\/td>\r\n8.676<\/td>\r\n8.376<\/td>\r\n<\/tr>\r\n
      M12<\/td>\r\n6<\/td>\r\n18<\/td>\r\n11.063<\/td>\r\n10.863<\/td>\r\n10.441<\/td>\r\n10.106<\/td>\r\n<\/tr>\r\n
      M14<\/td>\r\n8<\/td>\r\n24<\/td>\r\n12.913<\/td>\r\n12.701<\/td>\r\n12.21<\/td>\r\n11.835<\/td>\r\n<\/tr>\r\n
      M16<\/td>\r\n8<\/td>\r\n24<\/td>\r\n14.913<\/td>\r\n14.701<\/td>\r\n14.21<\/td>\r\n13.835<\/td>\r\n<\/tr>\r\n
      M18<\/td>\r\n10<\/td>\r\n30<\/td>\r\n16.6<\/td>\r\n16.376<\/td>\r\n15.744<\/td>\r\n15.294<\/td>\r\n<\/tr>\r\n
      M20<\/td>\r\n10<\/td>\r\n30<\/td>\r\n18.6<\/td>\r\n18.376<\/td>\r\n17.744<\/td>\r\n17.294<\/td>\r\n<\/tr>\r\n
      M22<\/td>\r\n10<\/td>\r\n30<\/td>\r\n20.6<\/td>\r\n20.376<\/td>\r\n19.744<\/td>\r\n19.294<\/td>\r\n<\/tr>\r\n
      M24<\/td>\r\n12<\/td>\r\n36<\/td>\r\n22.316<\/td>\r\n22.051<\/td>\r\n21.252<\/td>\r\n20.752<\/td>\r\n<\/tr>\r\n
      M27<\/td>\r\n12<\/td>\r\n36<\/td>\r\n25.316<\/td>\r\n25.051<\/td>\r\n24.252<\/td>\r\n23.752<\/td>\r\n<\/tr>\r\n
      M30<\/td>\r\n15<\/td>\r\n45<\/td>\r\n28.007<\/td>\r\n27.727<\/td>\r\n26.771<\/td>\r\n26.211<\/td>\r\n<\/tr>\r\n
      M33<\/td>\r\n15<\/td>\r\n45<\/td>\r\n31.007<\/td>\r\n30.727<\/td>\r\n29.771<\/td>\r\n29.211<\/td>\r\n<\/tr>\r\n
      M36<\/td>\r\n18<\/td>\r\n53<\/td>\r\n33.702<\/td>\r\n33.402<\/td>\r\n32.27<\/td>\r\n31.67<\/td>\r\n<\/tr>\r\n
      M39<\/td>\r\n18<\/td>\r\n53<\/td>\r\n36.702<\/td>\r\n36.402<\/td>\r\n35.27<\/td>\r\n34.67<\/td>\r\n<\/tr>\r\n
      M42<\/td>\r\n21<\/td>\r\n63<\/td>\r\n39.392<\/td>\r\n39.077<\/td>\r\n37.799<\/td>\r\n37.129<\/td>\r\n<\/tr>\r\n
      M45<\/td>\r\n21<\/td>\r\n63<\/td>\r\n42.392<\/td>\r\n42.077<\/td>\r\n40.799<\/td>\r\n40.129<\/td>\r\n<\/tr>\r\n
      M48<\/td>\r\n24<\/td>\r\n71<\/td>\r\n45.087<\/td>\r\n44.752<\/td>\r\n43.297<\/td>\r\n42.587<\/td>\r\n<\/tr>\r\n
      M52<\/td>\r\n24<\/td>\r\n71<\/td>\r\n49.087<\/td>\r\n48.752<\/td>\r\n46.681<\/td>\r\n45.971<\/td>\r\n<\/tr>\r\n
      M56<\/td>\r\n28<\/td>\r\n85<\/td>\r\n52.783<\/td>\r\n52.428<\/td>\r\n50.796<\/td>\r\n50.046<\/td>\r\n<\/tr>\r\n
      M60<\/td>\r\n28<\/td>\r\n85<\/td>\r\n56.783<\/td>\r\n56.428<\/td>\r\n54.796<\/td>\r\n54.046<\/td>\r\n<\/tr>\r\n
      M64<\/td>\r\n32<\/td>\r\n95<\/td>\r\n60.478<\/td>\r\n60.103<\/td>\r\n58.305<\/td>\r\n57.505<\/td>\r\n<\/tr>\r\n<\/tbody>\r\n<\/table>\r\n<\/div>\r\nThese dimensions provide guidance for nut manufacturing, ensuring compatibility with bolts under medium load conditions.\r\n\r\n<\/div>\r\n
      \r\n

      Coarse Pitch External Threads<\/h2>\r\nMedium precision, medium engagement. Tolerance zones: 6h for d \u2264 1.4 mm; 6g for d > 1.4 mm. Limits for major diameter d and pitch diameter d2<\/sub>, with min root radius per GB\/T 197-2003.\r\n
      \r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n
      Thread<\/th>\r\nEngagement Length<\/th>\r\nMajor Diameter d<\/th>\r\nPitch Diameter d2<\/sub><\/th>\r\nMin Root Radiusa<\/sup><\/th>\r\n<\/tr>\r\n
      ><\/th>\r\n\u2264<\/th>\r\nmax<\/th>\r\nmin<\/th>\r\nmax<\/th>\r\nmin<\/th>\r\nmin<\/th>\r\n<\/tr>\r\n<\/thead>\r\n
      M1<\/td>\r\n0.6<\/td>\r\n1.7<\/td>\r\n1<\/td>\r\n0.933<\/td>\r\n0.838<\/td>\r\n0.785<\/td>\r\n0.031<\/td>\r\n<\/tr>\r\n
      M1.2<\/td>\r\n0.6<\/td>\r\n1.7<\/td>\r\n1.2<\/td>\r\n1.133<\/td>\r\n1.038<\/td>\r\n0.985<\/td>\r\n0.031<\/td>\r\n<\/tr>\r\n
      M1.4<\/td>\r\n0.7<\/td>\r\n2<\/td>\r\n1.4<\/td>\r\n1.325<\/td>\r\n1.205<\/td>\r\n1.149<\/td>\r\n0.038<\/td>\r\n<\/tr>\r\n
      M1.6<\/td>\r\n0.8<\/td>\r\n2.6<\/td>\r\n1.581<\/td>\r\n1.496<\/td>\r\n1.354<\/td>\r\n1.291<\/td>\r\n0.044<\/td>\r\n<\/tr>\r\n
      M1.8<\/td>\r\n0.8<\/td>\r\n2.6<\/td>\r\n1.781<\/td>\r\n1.696<\/td>\r\n1.554<\/td>\r\n1.491<\/td>\r\n0.044<\/td>\r\n<\/tr>\r\n
      M2<\/td>\r\n1<\/td>\r\n3<\/td>\r\n1.981<\/td>\r\n1.886<\/td>\r\n1.721<\/td>\r\n1.654<\/td>\r\n0.05<\/td>\r\n<\/tr>\r\n
      M2.5<\/td>\r\n1.3<\/td>\r\n3.8<\/td>\r\n2.48<\/td>\r\n2.38<\/td>\r\n2.188<\/td>\r\n2.117<\/td>\r\n0.056<\/td>\r\n<\/tr>\r\n
      M3<\/td>\r\n1.5<\/td>\r\n4.5<\/td>\r\n2.98<\/td>\r\n2.874<\/td>\r\n2.655<\/td>\r\n2.58<\/td>\r\n0.063<\/td>\r\n<\/tr>\r\n
      M3.5<\/td>\r\n1.7<\/td>\r\n5<\/td>\r\n3.479<\/td>\r\n3.354<\/td>\r\n3.089<\/td>\r\n3.004<\/td>\r\n0.075<\/td>\r\n<\/tr>\r\n
      M4<\/td>\r\n2<\/td>\r\n6<\/td>\r\n3.978<\/td>\r\n3.838<\/td>\r\n3.523<\/td>\r\n3.433<\/td>\r\n0.088<\/td>\r\n<\/tr>\r\n
      M5<\/td>\r\n2.5<\/td>\r\n7.5<\/td>\r\n4.976<\/td>\r\n4.826<\/td>\r\n4.456<\/td>\r\n4.361<\/td>\r\n0.1<\/td>\r\n<\/tr>\r\n
      M6<\/td>\r\n3<\/td>\r\n9<\/td>\r\n5.974<\/td>\r\n5.794<\/td>\r\n5.324<\/td>\r\n5.212<\/td>\r\n0.125<\/td>\r\n<\/tr>\r\n
      M7<\/td>\r\n3<\/td>\r\n9<\/td>\r\n6.974<\/td>\r\n6.794<\/td>\r\n6.324<\/td>\r\n6.212<\/td>\r\n0.125<\/td>\r\n<\/tr>\r\n
      M8<\/td>\r\n4<\/td>\r\n12<\/td>\r\n7.972<\/td>\r\n7.76<\/td>\r\n7.16<\/td>\r\n7.042<\/td>\r\n0.156<\/td>\r\n<\/tr>\r\n
      M10<\/td>\r\n5<\/td>\r\n15<\/td>\r\n9.968<\/td>\r\n9.732<\/td>\r\n8.994<\/td>\r\n8.862<\/td>\r\n0.188<\/td>\r\n<\/tr>\r\n
      M12<\/td>\r\n6<\/td>\r\n18<\/td>\r\n11.966<\/td>\r\n11.701<\/td>\r\n10.829<\/td>\r\n10.679<\/td>\r\n0.219<\/td>\r\n<\/tr>\r\n
      M14<\/td>\r\n8<\/td>\r\n24<\/td>\r\n13.962<\/td>\r\n13.682<\/td>\r\n12.663<\/td>\r\n12.503<\/td>\r\n0.25<\/td>\r\n<\/tr>\r\n
      M16<\/td>\r\n8<\/td>\r\n24<\/td>\r\n15.962<\/td>\r\n15.682<\/td>\r\n14.663<\/td>\r\n14.503<\/td>\r\n0.25<\/td>\r\n<\/tr>\r\n
      M18<\/td>\r\n10<\/td>\r\n30<\/td>\r\n17.958<\/td>\r\n17.623<\/td>\r\n16.334<\/td>\r\n16.164<\/td>\r\n0.313<\/td>\r\n<\/tr>\r\n
      M20<\/td>\r\n10<\/td>\r\n30<\/td>\r\n19.958<\/td>\r\n19.623<\/td>\r\n18.334<\/td>\r\n18.164<\/td>\r\n0.313<\/td>\r\n<\/tr>\r\n
      M22<\/td>\r\n10<\/td>\r\n30<\/td>\r\n21.958<\/td>\r\n21.623<\/td>\r\n20.334<\/td>\r\n20.164<\/td>\r\n0.313<\/td>\r\n<\/tr>\r\n
      M24<\/td>\r\n12<\/td>\r\n36<\/td>\r\n23.952<\/td>\r\n23.577<\/td>\r\n22.003<\/td>\r\n21.803<\/td>\r\n0.375<\/td>\r\n<\/tr>\r\n
      M27<\/td>\r\n12<\/td>\r\n36<\/td>\r\n26.952<\/td>\r\n26.577<\/td>\r\n25.003<\/td>\r\n24.803<\/td>\r\n0.375<\/td>\r\n<\/tr>\r\n
      M30<\/td>\r\n15<\/td>\r\n45<\/td>\r\n29.947<\/td>\r\n29.522<\/td>\r\n27.674<\/td>\r\n27.462<\/td>\r\n0.438<\/td>\r\n<\/tr>\r\n
      M33<\/td>\r\n15<\/td>\r\n45<\/td>\r\n32.947<\/td>\r\n32.522<\/td>\r\n30.674<\/td>\r\n30.462<\/td>\r\n0.438<\/td>\r\n<\/tr>\r\n
      M36<\/td>\r\n18<\/td>\r\n53<\/td>\r\n35.94<\/td>\r\n35.465<\/td>\r\n33.342<\/td>\r\n33.118<\/td>\r\n0.5<\/td>\r\n<\/tr>\r\n
      M39<\/td>\r\n18<\/td>\r\n53<\/td>\r\n38.94<\/td>\r\n38.465<\/td>\r\n36.342<\/td>\r\n36.118<\/td>\r\n0.5<\/td>\r\n<\/tr>\r\n
      M42<\/td>\r\n21<\/td>\r\n63<\/td>\r\n41.937<\/td>\r\n41.437<\/td>\r\n39.014<\/td>\r\n38.778<\/td>\r\n0.563<\/td>\r\n<\/tr>\r\n
      M45<\/td>\r\n21<\/td>\r\n63<\/td>\r\n44.937<\/td>\r\n44.437<\/td>\r\n42.014<\/td>\r\n41.778<\/td>\r\n0.563<\/td>\r\n<\/tr>\r\n
      M48<\/td>\r\n24<\/td>\r\n71<\/td>\r\n47.929<\/td>\r\n47.399<\/td>\r\n44.681<\/td>\r\n44.431<\/td>\r\n0.625<\/td>\r\n<\/tr>\r\n
      M52<\/td>\r\n24<\/td>\r\n71<\/td>\r\n51.929<\/td>\r\n51.399<\/td>\r\n48.681<\/td>\r\n48.431<\/td>\r\n0.625<\/td>\r\n<\/tr>\r\n
      M56<\/td>\r\n28<\/td>\r\n85<\/td>\r\n55.925<\/td>\r\n55.365<\/td>\r\n52.353<\/td>\r\n52.088<\/td>\r\n0.688<\/td>\r\n<\/tr>\r\n
      M60<\/td>\r\n28<\/td>\r\n85<\/td>\r\n59.925<\/td>\r\n59.365<\/td>\r\n56.353<\/td>\r\n56.088<\/td>\r\n0.688<\/td>\r\n<\/tr>\r\n
      M64<\/td>\r\n32<\/td>\r\n95<\/td>\r\n63.92<\/td>\r\n63.32<\/td>\r\n60.023<\/td>\r\n59.743<\/td>\r\n0.75<\/td>\r\n<\/tr>\r\n<\/tbody>\r\n<\/table>\r\n<\/div>\r\na<\/sup> See GB\/T 197-2003 Chapter 7 and Table 9 for root radius details. These ensure stress distribution and fatigue resistance.\r\n\r\n<\/div>\r\n
      \r\n

      Fine Pitch Internal Threads<\/h2>\r\nMedium precision, medium engagement, 6H tolerance zone. Fine pitches offer better vibration resistance and adjustment precision.\r\n
      \r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n
      Thread<\/th>\r\nEngagement Length<\/th>\r\nPitch Diameter D2<\/sub><\/th>\r\nMinor Diameter D1<\/sub><\/th>\r\n<\/tr>\r\n
      ><\/th>\r\n\u2264<\/th>\r\nmax<\/th>\r\nmin<\/th>\r\nmax<\/th>\r\nmin<\/th>\r\n<\/tr>\r\n<\/thead>\r\n
      M8\u00d71<\/td>\r\n3<\/td>\r\n9<\/td>\r\n7.5<\/td>\r\n7.35<\/td>\r\n7.153<\/td>\r\n6.917<\/td>\r\n<\/tr>\r\n
      M10\u00d71<\/td>\r\n4<\/td>\r\n12<\/td>\r\n9.5<\/td>\r\n9.35<\/td>\r\n9.153<\/td>\r\n8.917<\/td>\r\n<\/tr>\r\n
      M10\u00d71.25<\/td>\r\n4<\/td>\r\n12<\/td>\r\n9.348<\/td>\r\n9.188<\/td>\r\n8.912<\/td>\r\n8.647<\/td>\r\n<\/tr>\r\n
      M12\u00d71.25<\/td>\r\n4.5<\/td>\r\n13<\/td>\r\n11.368<\/td>\r\n11.188<\/td>\r\n10.912<\/td>\r\n10.647<\/td>\r\n<\/tr>\r\n
      M12\u00d71.5<\/td>\r\n4.5<\/td>\r\n13<\/td>\r\n11.216<\/td>\r\n11.026<\/td>\r\n10.676<\/td>\r\n10.376<\/td>\r\n<\/tr>\r\n
      M14\u00d71.5<\/td>\r\n5.6<\/td>\r\n16<\/td>\r\n13.216<\/td>\r\n13.026<\/td>\r\n12.676<\/td>\r\n12.376<\/td>\r\n<\/tr>\r\n
      M16\u00d71.5<\/td>\r\n5.6<\/td>\r\n16<\/td>\r\n15.216<\/td>\r\n15.026<\/td>\r\n14.676<\/td>\r\n14.376<\/td>\r\n<\/tr>\r\n
      M18\u00d71.5<\/td>\r\n5.6<\/td>\r\n16<\/td>\r\n17.216<\/td>\r\n17.026<\/td>\r\n16.676<\/td>\r\n16.376<\/td>\r\n<\/tr>\r\n
      M18\u00d72<\/td>\r\n5.6<\/td>\r\n16<\/td>\r\n16.913<\/td>\r\n16.701<\/td>\r\n16.21<\/td>\r\n15.835<\/td>\r\n<\/tr>\r\n
      M20\u00d71.5<\/td>\r\n5.6<\/td>\r\n16<\/td>\r\n19.216<\/td>\r\n19.026<\/td>\r\n18.676<\/td>\r\n18.376<\/td>\r\n<\/tr>\r\n
      M20\u00d72<\/td>\r\n5.6<\/td>\r\n16<\/td>\r\n18.913<\/td>\r\n18.701<\/td>\r\n18.21<\/td>\r\n17.835<\/td>\r\n<\/tr>\r\n
      M22\u00d71.5<\/td>\r\n5.6<\/td>\r\n16<\/td>\r\n21.216<\/td>\r\n21.026<\/td>\r\n20.676<\/td>\r\n20.376<\/td>\r\n<\/tr>\r\n
      M22\u00d72<\/td>\r\n5.6<\/td>\r\n16<\/td>\r\n20.913<\/td>\r\n20.701<\/td>\r\n20.21<\/td>\r\n19.835<\/td>\r\n<\/tr>\r\n
      M24\u00d72<\/td>\r\n8.5<\/td>\r\n25<\/td>\r\n22.925<\/td>\r\n22.701<\/td>\r\n22.21<\/td>\r\n21.835<\/td>\r\n<\/tr>\r\n
      M27\u00d72<\/td>\r\n8.5<\/td>\r\n25<\/td>\r\n25.925<\/td>\r\n25.701<\/td>\r\n25.21<\/td>\r\n24.835<\/td>\r\n<\/tr>\r\n
      M30\u00d72<\/td>\r\n8.5<\/td>\r\n25<\/td>\r\n28.925<\/td>\r\n28.701<\/td>\r\n28.21<\/td>\r\n27.835<\/td>\r\n<\/tr>\r\n
      M33\u00d72<\/td>\r\n8.5<\/td>\r\n25<\/td>\r\n31.925<\/td>\r\n31.701<\/td>\r\n31.21<\/td>\r\n30.835<\/td>\r\n<\/tr>\r\n
      M36\u00d73<\/td>\r\n12<\/td>\r\n36<\/td>\r\n34.316<\/td>\r\n34.051<\/td>\r\n33.252<\/td>\r\n32.752<\/td>\r\n<\/tr>\r\n
      M39\u00d73<\/td>\r\n12<\/td>\r\n36<\/td>\r\n37.316<\/td>\r\n37.051<\/td>\r\n36.252<\/td>\r\n35.752<\/td>\r\n<\/tr>\r\n
      M42\u00d73<\/td>\r\n12<\/td>\r\n36<\/td>\r\n40.316<\/td>\r\n40.051<\/td>\r\n39.252<\/td>\r\n38.752<\/td>\r\n<\/tr>\r\n
      M45\u00d73<\/td>\r\n12<\/td>\r\n36<\/td>\r\n43.316<\/td>\r\n43.051<\/td>\r\n42.252<\/td>\r\n41.752<\/td>\r\n<\/tr>\r\n
      M48\u00d73<\/td>\r\n15<\/td>\r\n45<\/td>\r\n46.331<\/td>\r\n46.051<\/td>\r\n45.252<\/td>\r\n44.752<\/td>\r\n<\/tr>\r\n
      M52\u00d74<\/td>\r\n19<\/td>\r\n56<\/td>\r\n49.717<\/td>\r\n49.402<\/td>\r\n48.27<\/td>\r\n47.67<\/td>\r\n<\/tr>\r\n
      M56\u00d74<\/td>\r\n19<\/td>\r\n56<\/td>\r\n53.717<\/td>\r\n53.402<\/td>\r\n52.27<\/td>\r\n51.67<\/td>\r\n<\/tr>\r\n
      M60\u00d74<\/td>\r\n19<\/td>\r\n56<\/td>\r\n57.717<\/td>\r\n57.402<\/td>\r\n56.27<\/td>\r\n55.67<\/td>\r\n<\/tr>\r\n
      M64\u00d74<\/td>\r\n19<\/td>\r\n56<\/td>\r\n61.717<\/td>\r\n61.402<\/td>\r\n60.27<\/td>\r\n59.67<\/td>\r\n<\/tr>\r\n<\/tbody>\r\n<\/table>\r\n<\/div>\r\nThese values support finer load distribution in high-vibration environments.\r\n\r\n<\/div>\r\n
      \r\n

      Fine Pitch External Threads<\/h2>\r\nMedium precision, medium engagement, 6g tolerance zone. Provides stronger core sections for enhanced shear strength.\r\n
      \r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n
      Thread<\/th>\r\nEngagement Length<\/th>\r\nMajor Diameter d<\/th>\r\nPitch Diameter d2<\/sub><\/th>\r\nMin Root Radiusa<\/sup><\/th>\r\n<\/tr>\r\n
      ><\/th>\r\n\u2264<\/th>\r\nmax<\/th>\r\nmin<\/th>\r\nmax<\/th>\r\nmin<\/th>\r\nmin<\/th>\r\n<\/tr>\r\n<\/thead>\r\n
      M8\u00d71<\/td>\r\n3<\/td>\r\n9<\/td>\r\n7.974<\/td>\r\n7.794<\/td>\r\n7.324<\/td>\r\n7.212<\/td>\r\n0.125<\/td>\r\n<\/tr>\r\n
      M10\u00d71<\/td>\r\n4<\/td>\r\n12<\/td>\r\n9.974<\/td>\r\n9.794<\/td>\r\n9.324<\/td>\r\n9.212<\/td>\r\n0.125<\/td>\r\n<\/tr>\r\n
      M10\u00d71.25<\/td>\r\n4<\/td>\r\n12<\/td>\r\n9.972<\/td>\r\n9.76<\/td>\r\n9.16<\/td>\r\n9.042<\/td>\r\n0.156<\/td>\r\n<\/tr>\r\n
      M12\u00d71.25<\/td>\r\n4.5<\/td>\r\n13<\/td>\r\n11.972<\/td>\r\n11.76<\/td>\r\n11.16<\/td>\r\n11.028<\/td>\r\n0.156<\/td>\r\n<\/tr>\r\n
      M12\u00d71.5<\/td>\r\n4.5<\/td>\r\n13<\/td>\r\n11.968<\/td>\r\n11.732<\/td>\r\n10.994<\/td>\r\n10.854<\/td>\r\n0.188<\/td>\r\n<\/tr>\r\n
      M14\u00d71.5<\/td>\r\n5.6<\/td>\r\n16<\/td>\r\n13.968<\/td>\r\n13.732<\/td>\r\n12.994<\/td>\r\n12.854<\/td>\r\n0.188<\/td>\r\n<\/tr>\r\n
      M16\u00d71.5<\/td>\r\n5.6<\/td>\r\n16<\/td>\r\n15.968<\/td>\r\n15.732<\/td>\r\n14.994<\/td>\r\n14.854<\/td>\r\n0.188<\/td>\r\n<\/tr>\r\n
      M18\u00d71.5<\/td>\r\n5.6<\/td>\r\n16<\/td>\r\n17.968<\/td>\r\n17.732<\/td>\r\n16.994<\/td>\r\n16.854<\/td>\r\n0.188<\/td>\r\n<\/tr>\r\n
      M18\u00d72<\/td>\r\n5.6<\/td>\r\n16<\/td>\r\n17.962<\/td>\r\n17.682<\/td>\r\n16.663<\/td>\r\n16.503<\/td>\r\n0.25<\/td>\r\n<\/tr>\r\n
      M20\u00d71.5<\/td>\r\n5.6<\/td>\r\n16<\/td>\r\n19.968<\/td>\r\n19.732<\/td>\r\n18.994<\/td>\r\n18.854<\/td>\r\n0.188<\/td>\r\n<\/tr>\r\n
      M20\u00d72<\/td>\r\n5.6<\/td>\r\n16<\/td>\r\n19.962<\/td>\r\n19.682<\/td>\r\n18.663<\/td>\r\n18.503<\/td>\r\n0.25<\/td>\r\n<\/tr>\r\n
      M22\u00d71.5<\/td>\r\n5.6<\/td>\r\n16<\/td>\r\n21.968<\/td>\r\n21.732<\/td>\r\n20.994<\/td>\r\n20.854<\/td>\r\n0.188<\/td>\r\n<\/tr>\r\n
      M22\u00d72<\/td>\r\n5.6<\/td>\r\n16<\/td>\r\n21.962<\/td>\r\n21.682<\/td>\r\n20.663<\/td>\r\n20.503<\/td>\r\n0.25<\/td>\r\n<\/tr>\r\n
      M24\u00d72<\/td>\r\n8.5<\/td>\r\n25<\/td>\r\n23.962<\/td>\r\n23.682<\/td>\r\n22.663<\/td>\r\n22.493<\/td>\r\n0.25<\/td>\r\n<\/tr>\r\n
      M27\u00d72<\/td>\r\n8.5<\/td>\r\n25<\/td>\r\n26.962<\/td>\r\n26.682<\/td>\r\n25.663<\/td>\r\n25.493<\/td>\r\n0.25<\/td>\r\n<\/tr>\r\n
      M30\u00d72<\/td>\r\n8.5<\/td>\r\n25<\/td>\r\n29.962<\/td>\r\n29.682<\/td>\r\n28.663<\/td>\r\n28.493<\/td>\r\n0.25<\/td>\r\n<\/tr>\r\n
      M33\u00d72<\/td>\r\n8.5<\/td>\r\n25<\/td>\r\n32.962<\/td>\r\n32.682<\/td>\r\n31.663<\/td>\r\n31.493<\/td>\r\n0.25<\/td>\r\n<\/tr>\r\n
      M36\u00d73<\/td>\r\n12<\/td>\r\n36<\/td>\r\n35.952<\/td>\r\n35.577<\/td>\r\n34.003<\/td>\r\n33.803<\/td>\r\n0.375<\/td>\r\n<\/tr>\r\n
      M39\u00d73<\/td>\r\n12<\/td>\r\n36<\/td>\r\n38.952<\/td>\r\n38.577<\/td>\r\n37.003<\/td>\r\n36.803<\/td>\r\n0.375<\/td>\r\n<\/tr>\r\n
      M42\u00d73<\/td>\r\n12<\/td>\r\n36<\/td>\r\n41.952<\/td>\r\n41.577<\/td>\r\n40.003<\/td>\r\n39.803<\/td>\r\n0.375<\/td>\r\n<\/tr>\r\n
      M45\u00d73<\/td>\r\n12<\/td>\r\n36<\/td>\r\n44.952<\/td>\r\n44.577<\/td>\r\n43.003<\/td>\r\n42.803<\/td>\r\n0.375<\/td>\r\n<\/tr>\r\n
      M48\u00d73<\/td>\r\n15<\/td>\r\n45<\/td>\r\n47.952<\/td>\r\n47.577<\/td>\r\n46.003<\/td>\r\n45.791<\/td>\r\n0.375<\/td>\r\n<\/tr>\r\n
      M52\u00d74<\/td>\r\n19<\/td>\r\n56<\/td>\r\n51.94<\/td>\r\n51.465<\/td>\r\n49.342<\/td>\r\n49.106<\/td>\r\n0.5<\/td>\r\n<\/tr>\r\n
      M56\u00d74<\/td>\r\n19<\/td>\r\n56<\/td>\r\n55.94<\/td>\r\n55.465<\/td>\r\n53.342<\/td>\r\n53.106<\/td>\r\n0.5<\/td>\r\n<\/tr>\r\n
      M60\u00d74<\/td>\r\n19<\/td>\r\n56<\/td>\r\n59.94<\/td>\r\n59.465<\/td>\r\n57.342<\/td>\r\n57.106<\/td>\r\n0.5<\/td>\r\n<\/tr>\r\n
      M64\u00d74<\/td>\r\n19<\/td>\r\n56<\/td>\r\n63.94<\/td>\r\n63.465<\/td>\r\n61.342<\/td>\r\n61.106<\/td>\r\n0.5<\/td>\r\n<\/tr>\r\n<\/tbody>\r\n<\/table>\r\n<\/div>\r\na<\/sup> See GB\/T 197-2003 for root radius specifications, critical for avoiding stress concentrations.\r\n\r\n<\/div>\r\n
      \r\n

      FAQ<\/h2>\r\n

      What tolerance zones apply to coarse internal threads?<\/h3>\r\n5H for diameters \u22641.4 mm; 6H for >1.4 mm, ensuring medium precision fit.\r\n

      How does plating affect thread dimensions?<\/h3>\r\nTolerances are pre-plating; post-plating profiles must not exceed H\/h positions for thin coatings to maintain assembly.\r\n

      Why use fine pitch threads?<\/h3>\r\nThey provide better vibration resistance and finer adjustments, with stronger cores per limits in tables 3 and 4.\r\n

      What is medium engagement length?<\/h3>\r\nIt balances thread strength and cost; use table values for specific ranges to avoid over- or under-engagement.\r\n

      How to interpret root radius?<\/h3>\r\nMin values per GB\/T 197-2003 reduce stress; essential for fatigue-prone applications.\r\n

      Are these limits for all materials?<\/h3>\r\nYes, but adjust for special platings; consult standard for heavy coatings requiring oversized threads.\r\n\r\n<\/div>\r\n ","_et_gb_content_width":"","footnotes":""},"categories":[220],"tags":[],"class_list":["post-5757","post","type-post","status-publish","format-standard","hentry","category-technical-documentation-and-references"],"_links":{"self":[{"href":"https:\/\/korea-transmission.com\/es\/wp-json\/wp\/v2\/posts\/5757","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/korea-transmission.com\/es\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/korea-transmission.com\/es\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/korea-transmission.com\/es\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/korea-transmission.com\/es\/wp-json\/wp\/v2\/comments?post=5757"}],"version-history":[{"count":3,"href":"https:\/\/korea-transmission.com\/es\/wp-json\/wp\/v2\/posts\/5757\/revisions"}],"predecessor-version":[{"id":5760,"href":"https:\/\/korea-transmission.com\/es\/wp-json\/wp\/v2\/posts\/5757\/revisions\/5760"}],"wp:attachment":[{"href":"https:\/\/korea-transmission.com\/es\/wp-json\/wp\/v2\/media?parent=5757"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/korea-transmission.com\/es\/wp-json\/wp\/v2\/categories?post=5757"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/korea-transmission.com\/es\/wp-json\/wp\/v2\/tags?post=5757"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}